UBT1J220MPD

ALUMINUM ELECTROLYTIC CAPACITORS BT High Temperature Range, For +125°C Use series Highly dependable reliability withstanding load life of 2000 to 10000 hours at +125°C. Suited for automobile electronics where heavy duty services are indispensable. Adapted to the RoHS directive (2002/95/EC). BW High Temperature BT Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics – 40 ~ +125°C (10 ~ 250V), – 25 ~ +125°C (350 ~ 450V) 10 ~ 450V 1 ~ 4700µF ± 20% at 120Hz, 20°C Rated Voltage (V) 10 ~ 100 160 ~ 450 < CV = 1000 : I = 0.1CV+40 (µA) max. (1 minute's) CV > 1000 : I = 0.04CV+100 (µA) max. (1 minute's) 100 0.08 After 1 minute's application of rated voltage, leakage current Leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) tan δ ( MAX.) tan δ 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 0.10 80 0.08 160 ~ 250 350 ~ 450 120Hz, 20°C 0.20 0.24 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio Z– 40°C / Z+20°C ZT / Z20 (MAX.) 10 3 4 16 2 4 25 2 4 35 2 4 50 2 4 63 2 4 80 2 4 100 2 4 160 ~ 250 350 ~ 450 3 6 6 – Endurance After an application of D.C. bias voltage plus the rated ripple current for less than 50V (φD = 8 : 2000 hours, > φD = 10 : 5000 hours, φD = 12.5 : 10000 hours), 63~100V (φD = 8 : 2000 hours, φD = 10 : 3000 hours, > φD = 12.5 : 5000 hours), more than 160V (2000 hours) at 125°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristics requirements listed at right. Capacitance change Dissipation Factor Leakage current Within ± 30% of initial value (10 ~ 100V) Within ± 20% of initial value (160 ~ 450V) 300% or less of initial specified value (10 ~ 100V) 200% or less of initial specified value (160 ~ 450V) Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 125˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on blue sleeve. Radial Lead Type Type numbering system (Example : 10V 220µF) f Sleeve (polyolefin) D+ MAX. d UB T 1 A 2 2 1 MPD P ±0.5 1 2 3 4 5 6 7 8 9 10 11 Pressure relief vent f L+2MAX. 15MIN 4MIN (mm) Configuration Capacitance tolerance (±20%) Rated Capacitance (220mF) Rated voltage (10V) Series name Type f 8 10 12.5 16 18 0.8 0.8 1.0 1.0 1.0 P 3.5 5.0 5.0 7.5 7.5 fd 0.6 0.6 0.6 0.8 0.8 In case L > 25 for the f12.5 dia. unit, lead dia. f d = 0.8mm. D Configuration Pb-free leadwire fD Pb-free Polyolefin sleeve 8 á 10 PD 12.5 ~ 18 HD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS BT series Dimensions V (Code) 10 (1A) Case size φD × L (mm) Impedance Rated ripple (Ω) MAX. (mArms) 16 (1C) Case size φD × L (mm) Impedance Rated ripple (Ω) MAX. (mArms) 25 (1E) Case size φD × L (mm) Impedance Rated ripple (Ω) MAX. (mArms) 35 (1V) Case size φD × L (mm) Impedance Rated ripple (Ω) MAX. (mArms) 50 (1H) Case size φD × L (mm) Impedance Rated ripple (Ω) MAX. (mArms) Item Cap. . (µF) Co de 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 010 2R2 3R3 4R7 100 220 330 470 101 221 8 × 11.5 10 × 12.5 331 10 × 12.5 471 10 × 20 102 222 12.5 × 25 16 × 25 332 16 × 31.5 472 V(Code) 0.26 0.15 0.10 0.057 0.033 0.024 0.020 340 620 680 1100 1750 2300 2710 8 × 11.5 10 × 12.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 18 × 31.5 0.32 0.15 0.10 0.075 0.042 0.024 0.020 0.018 340 620 680 945 1490 2300 2710 3270 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 31.5 18 × 31.5 0.13 0.10 0.075 0.057 0.033 0.020 0.017 500 680 945 1100 1750 2710 3310 10 × 12.5 10 × 16 10 × 20 12.5 × 20 16 × 25 18 × 35.5 0.15 0.094 0.075 0.058 0.031 0.025 620 790 950 1330 2010 2790 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 16 × 31.5 2.00 1.80 1.50 1.15 0.75 0.50 0.45 0.35 0.18 0.098 0.070 0.055 0.031 35 50 60 85 180 250 300 440 555 930 1330 1650 2430 63 (1J) Case size φD × L (mm) Impedance Rated ripple (Ω) MAX. (mArms) 80 (1K) Case size φD × L (mm) Impedance Rated ripple (Ω) MAX. (mArms) 100 (2A) Case size φD × L (mm) Impedance Rated ripple (Ω) MAX. (mArms) Item Cap. . (µF) Co de 4.7 10 22 33 47 100 220 330 470 4R7 100 220 8 × 11.5 8 × 11.5 330 10 × 12.5 470 10 × 16 101 221 12.5 × 20 331 12.5 × 25 471 12.5 × 31.5 2.00 1.50 0.59 0.41 0.16 0.12 0.097 130 150 530 690 1050 1290 1460 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 12.5 × 31.5 16 × 25 1.50 0.80 0.80 0.39 0.18 0.16 0.11 150 480 480 790 1240 1390 1500 8 × 11.5 8 × 11.5 10 × 12.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 2.00 1.50 0.80 0.80 0.55 0.25 0.11 0.079 130 150 480 480 630 990 1500 1790 Rated Ripple (mArms) at 125°C 100kHz Impedance (Ω) MAX. at 20°C 100kHz Frequency coefficient of rated ripple current V 10 ~ 100 CV Frequency 120Hz 0.50 0.67 300Hz 0.64 0.79 1kHz 0.83 0.91 10kHz ~ 1.00 1.00 1000 > CV 1000 CV V(Code) 160 (2C) Case size φD × L (mm) Rated ripple (mArms) 200 (2D) Case size φD × L (mm) Rated ripple (mArms) 250 (2E) Case size φD × L (mm) Rated ripple (mArms) 350 (2V) Case size φD × L (mm) Rated ripple (mArms) 400 (2G) Case size φD × L (mm) Rated ripple (mArms) 450 (2W) Case size φD × L (mm) Rated ripple (mArms) Item Cap. Code 4.7 10 22 33 47 68 100 150 4R7 100 220 330 470 680 101 151 10 × 20 10 × 25 12.5 × 20 12.5 × 25 16 × 25 16 × 31.5 115 154 187 245 329 434 10 × 20 10 × 25 12.5 × 20 12.5 × 25 16 × 20 16 × 25 178 126 157 204 250 329 10 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 31.5 178 128 171 225 292 10 × 20 10 × 25 12.5 × 25 16 × 25 16 × 31.5 153 185 139 189 243 10 × 20 10 × 25 12.5 × 31.5 16 × 25 16 × 31.5 153 186 142 189 243 10 × 25 12.5 × 20 16 × 25 16 × 31.5 158 186 154 203 Rated Ripple (mArms) at 125°C 120Hz Frequency coefficient of rated ripple current V 160 ~ 450 Cap. (µF) Frequency 50Hz 0.75 0.80 120Hz 1.00 1.00 300Hz 1.25 1.15 1kHz 1.50 1.30 10kHz 1.75 1.40 100kHz 1.80 1.50 4.7 ~ 330 .47 ~ 150 Wider range of rating. CAT.8100V