UBW1V331MPD

ALUMINUM ELECTROLYTIC CAPACITORS UBW High Temperature Range, For +135°C Use UBX Highly dependable reliability withstanding load life of 1000 to 3000 hours at +135°C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. High Temperature UBW UBY High Ripple Current High Ripple Current UBT Specifications Performance Characteristics Item Category Temperature Range –55 to +135°C Rated Voltage Range 10 to 100V Rated Capacitance Range 4.7 to 4700µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 0.10 80 0.08 100 0.08 120Hz,  20°C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. 120Hz 10 3 4 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) Z– 40°C / Z+20°C 16 2 4 The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours (1000 hours for φD=8, 2000 hours for φD=10) at 135°C, the peak voltage shall not exceed the rated voltage. Endurance 25 2 4 35 2 4 50 2 4 63 2 4 80 2 4 100 2 4 Within ± 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current After storing the capacitors under no load at 135˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Printed with white color letter on blue sleeve. Marking Radial Lead Type Type numbering system (Example : 10V 220µF) 1 Sleeve (polyolefin) Sleeve (polyolefin) 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11 U BW 1 A 2 2 1 MP D U BW 1 A 2 2 1 MP D P±0.5 P±0.5 + MAX. φD+φDMAX. φd φd Pressure relief vent Pressure relief vent L + 2 MAX. L + 2 MAX. 15 MIN 15 MIN 4 MIN 4 MIN Configuration Configuration Pb-free leadwire φD Pb-free Polyolefin sleeve Pb-free leadwire φD Pb-free Polyolefin sleeve 8 ,10 PD 8 ,10 PD 12.5 · 16 HD 12.5 · 16 HD (mm) (mm) 16 16 1.0 φD φD 8 8 0.8 10 10 0.8 12.5 12.5 1.0 P P φd φd 0.8 3.5 3.5 0.6 0.8 5.0 5.0 0.6 1.0 5.0 5.0 0.6 1.0 7.5 7.5 0.8 0.6 0.6 0.6 0.8 • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 258 CAT.8100H ALUMINUM ELECTROLYTIC CAPACITORS UBW Dimensions 10 (1A) V (Code) Item Co Cap.. (µF) 100 220 330 470 1000 2200 3300 4700 de 101 221 331 471 102 222 332 472 Case size φD × L (mm) 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 31.5 Item Cap.. (µF) 4.7 10 22 33 47 100 220 330 470 1000 de 4R7 100 220 330 470 101 221 331 471 102 0.26 0.15 0.10 0.057 0.033 0.024 0.020 340 620 680 1100 1750 2300 2710 Case size φD × L (mm) 8 × 11.5 10 × 12.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 Case size φD × L (mm) 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 16 × 31.5 Rated ripple (mArms) Impedance (Ω) MAX. 25 (1E) Rated Impedance ripple (Ω) MAX. (mArms) 0.32 0.15 0.10 0.075 0.042 0.024 0.020 340 620 680 945 1490 2300 2710 Case size φD × L (mm) 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 31.5 63 (1J) 50 (1H) V(Code) Co 16 (1C) Rated Impedance ripple (Ω) MAX. (mArms) 1.15 0.75 0.50 0.45 0.35 0.18 0.098 0.070 0.055 0.031 85 180 250 300 440 555 930 1330 1650 2430 Case size φD × L (mm) 8 × 11.5 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 12.5 × 25 12.5 × 31.5 16 × 31.5 2.00 1.50 0.59 0.41 0.16 0.12 0.097 0.055 0.13 0.10 0.075 0.057 0.033 0.020 500 680 945 1100 1750 2710 Case size φD × L (mm) 10 × 12.5 10 × 16 10 × 20 12.5 × 20 16 × 25 80 (1K) Impedance (Ω) MAX. 35 (1V) Rated Impedance ripple (Ω) MAX. (mArms) Rated ripple (mArms) Case size φD × L (mm) 130 150 530 690 1050 1290 1460 1900 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 12.5 × 31.5 16 × 25 Impedance (Ω) MAX. 1.50 0.80 0.80 0.39 0.18 0.16 0.11 Impedance (Ω) MAX. 0.15 0.094 0.075 0.058 0.031 Rated ripple (mArms) 620 790 950 1330 2010 100 (2A) Rated ripple (mArms) 150 480 480 790 1240 1390 1500 Case size φD × L (mm) 8 × 11.5 10 × 12.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 Impedance (Ω) MAX. 1.50 0.80 0.80 0.55 0.25 0.11 0.079 Rated ripple (mArms) 150 480 480 630 990 1500 1790 Rated ripple current (mArms) at 135°C 100kHz Impedance (Ω) MAX. at 20°C 100kHz Frequency coefficient of rated ripple current V 10 to 100 CV Frequency 1000 > CV 1000 CV 120Hz 300Hz 1kHz 10kHz or more 0.50 0.64 0.83 1.00 0.67 0.79 0.91 1.00 259 CAT.8100H