UBY1J112MHL

ALUMINUM ELECTROLYTIC CAPACITORS UBY High Temperature Range, For +125°C or 135°C Use Higher capacitance and higher ripple current than UBT and UBW. Ideal for automobile control ciucuits such as electric power steering and direct injection engine drive. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UBT UBW Higher Capacitance Higher ripple current UBY Vibration Resistance UXY Specifications Performance Characteristics Item Category Temperature Range –40 to +135°C Rated Voltage Range 25 to 100V Rated Capacitance Range 160 to 12000µF Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) ± 20% at 120Hz, 20°C After 1 minute’s application of rated voltage at 20°C, leakage current is not more than 0.03CV (µA) 25 0.14 Rated voltage (V) tan δ (MAX.) 35 0.12 50 0.10 63 0.10 80 0.08 120Hz, 20°C 100 0.08 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio (MAX.) Z– 40°C / Z+20°C 25 2 4 50 2 4 35 2 4 Rated voltage The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for the time shown in right table at 125°C or 135°C, the peak voltage shall not exceed the rated voltage. Endurance 100 2 4 80 2 4 63 2 4 Time 3000hours 3000hours 3000hours 2000hours Temperature 125°C 135°C 125°C 135°C 25 to 50V 63 to 100V Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current After storing the capacitors under no load at 125˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Black print on the case top. Marking The UBY series places emphasis on high ripple current, as a result the lifetime calculation is different than other series. Please contact Nichicon for details. Radial Lead Type Type numbering system (Example : 25V 12000µF) 1 nichicon Series 3 4 5 6 7 8 9 10 11 φd 12 size code Configuration Capacitance tolerance (±20%) P±0.5 Rated Voltage 12000 BY 25V H1501 Trade mark 2 UB Y 1 E 1 2 3 MH L φD+0.5 MAX. Rated Capacitance Laminated case Rated capacitance (12000µF) Rated voltage (25V) Lot No. Pressure relief vent L+1.5MAX. 15MIN Series name 4MIN Type (mm) φD P φd 12.5 5.0 0.6※ 16 7.5 0.8 18 7.5 0.8 Frequency coefficient of rated ripple current Frequency 120Hz 1kHz 10kHz 100kHz or more 0.40 0.75 0.90 1.00 620 0.50 0.85 0.94 1.00 680 to 2000 0.60 0.87 0.95 1.00 2200 to 4300 0.75 0.90 0.95 1.00 4700 to 12000 0.85 0.95 0.98 1.00 Cap. (µF) 160 220 to Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UBY Dimensions Rated Voltage （V） （code） 25 （1E） 35 （1V） 50 （1H） Rated Ripple （mArms） Leakage Current （µA） at 20℃ after 1 minute 20℃/ 100kHz －40℃/ 100kHz 125℃/ 100kHz 135℃/ 100kHz 0.16 1500 0.042 0.48 2760 1690 UBY1E202MHL 12.5× 25 0.18 2250 0.033 0.30 3480 2010 UBY1E302MHL 3300 16× 20 0.18 2475 0.031 0.27 3040 1860 UBY1E332MHL 3600 12.5× 31.5 0.18 2700 0.028 0.24 4490 2900 UBY1E362MHL 4300 18× 20 0.20 3225 0.030 0.22 3250 1870 UBY1E432MHL 4700 16× 25 0.20 3525 0.026 0.22 4260 2870 UBY1E472MHL 5100 12.5× 40 Rated Capacitance （µF） Case Size φD×L（mm） tan δ 2000 12.5× 20 3000 （ ） ESR（Ω）MAX. Part Number 0.22 3825 0.024 0.19 5810 3470 UBY1E512MHL 6200 16× 31.5 0.24 4650 0.023 0.18 5480 3400 UBY1E622MHL 6200 18× 25 0.24 4650 0.025 0.19 4500 2900 UBY1E622MHL6 7500 16× 35.5 0.26 5625 0.020 0.14 6070 3630 UBY1E752MHL 8200 18× 31.5 0.28 6150 0.022 0.16 5600 3470 UBY1E822MHL 9100 16× 40 0.30 6825 0.019 0.12 6810 3930 UBY1E912MHL 10000 18×35.5 0.32 7500 0.019 0.12 6280 3750 UBY1E103MHL 12000 18×40 0.36 9000 0.018 0.10 7070 4080 UBY1E123MHL 1300 12.5× 20 0.12 1365 0.042 0.48 2760 1690 UBY1V132MHL 1800 12.5× 25 0.12 1890 0.033 0.30 3480 2010 UBY1V182MHL 2200 12.5× 31.5 0.14 2310 0.028 0.24 4490 2900 UBY1V222MHL 2200 16× 20 0.14 2310 0.031 0.27 3040 1860 UBY1V222MHL6 2700 12.5× 35.5 0.14 2835 0.025 0.21 5140 3190 UBY1V272MHL 2700 18× 20 0.14 2835 0.030 0.22 3250 1870 UBY1V272MHL6 3000 16× 25 0.16 3150 0.026 0.22 4260 2870 UBY1V302MHL 3300 12.5× 40 0.16 3465 0.024 0.19 5810 3470 UBY1V332MHL 3900 16× 31.5 0.16 4095 0.023 0.18 5480 3400 UBY1V392MHL 3900 18× 25 0.16 4095 0.025 0.19 4500 2900 UBY1V392MHL6 4700 16× 35.5 0.18 4935 0.020 0.14 6070 3630 UBY1V472MHL 5100 18× 31.5 0.20 5355 0.022 0.16 5600 3470 UBY1V512MHL 5600 16× 40 0.20 5880 0.019 0.12 6810 3930 UBY1V562MHL 6200 18× 35.5 0.22 6510 0.019 0.12 6280 3750 UBY1V622MHL 7500 18× 40 0.24 7875 0.018 0.10 7070 4080 UBY1V752MHL 620 12.5× 20 0.10 930 0.056 0.52 2400 1470 UBY1H621MHL 820 12.5× 25 0.10 1230 0.044 0.35 3350 2260 UBY1H821MHL 1000 16× 20 0.10 1500 0.039 0.30 2960 1870 UBY1H102MHL 1100 12.5× 31.5 0.10 1650 0.037 0.26 4220 2520 UBY1H112MHL 1300 12.5× 35.5 0.10 1950 0.033 0.23 4810 2780 UBY1H132MHL 1300 16× 25 0.10 1950 0.033 0.22 4040 2500 UBY1H132MHL6 1300 18× 20 0.10 1950 0.038 0.20 3130 2110 UBY1H132MHL3 1600 12.5×40 0.10 2400 0.032 0.20 5240 3020 UBY1H162MHL 1800 16× 31.5 0.10 2700 0.029 0.19 5130 2960 UBY1H182MHL 1800 18× 25 0.10 2700 0.032 0.19 4230 2530 UBY1H182MHL6 2200 16× 35.5 0.12 3300 0.025 0.14 5480 3160 UBY1H222MHL 2400 18× 31.5 0.12 3600 0.025 0.16 5240 3020 UBY1H242MHL 2700 16× 40 0.12 4050 0.022 0.13 5930 3420 UBY1H272MHL 3000 18× 35.5 0.14 4500 0.022 0.12 5870 3390 UBY1H302MHL 3600 18× 40 0.14 5400 0.020 0.10 6420 3700 UBY1H362MHL For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UBY Dimensions Rated Voltage （V） （code） 63 （1J） 80 （1K） 100 （2A） Rated Capacitance （µF） Leakage Current （µA） at 20℃ after 1 minute Case Size φD×L（mm） tan δ 390 12.5× 20 0.10 737.1 560 12.5× 25 0.10 1058.4 （ ） ESR（Ω）MAX. 20℃/ 100kHz Rated Ripple （mArms） Part Number －40℃/ 100kHz 125℃/ 100kHz 135℃/ 100kHz 0.074 0.56 1640 1420 UBY1J391MHL 0.054 0.39 2520 2050 UBY1J561MHL 750 12.5× 31.5 0.10 1417.5 0.042 0.30 3110 2630 UBY1J751MHL 750 16× 20 0.10 1417.5 0.053 0.34 2140 1910 UBY1J751MHL6 950 12.5× 35.5 0.10 1795.5 0.038 0.25 3760 2970 UBY1J951MHL 950 18× 20 0.10 1795.5 0.048 0.26 2350 2100 UBY1J951MHL6 UBY1J102MHL 1000 16× 25 0.10 1890 0.038 0.23 2940 2680 1100 12.5×40 0.10 2079 0.031 0.22 4610 3260 UBY1J112MHL 1300 16× 31.5 0.10 2457 0.034 0.20 3860 3050 UBY1J132MHL 1300 18× 25 0.10 2457 0.035 0.19 3080 2810 UBY1J132MHL6 1700 16× 35.5 0.10 3213 0.027 0.15 4590 3420 UBY1J172MHL 1800 18× 31.5 0.10 3402 0.028 0.15 4080 3220 UBY1J182MHL 2000 16× 40 0.12 3780 0.025 0.14 5190 3670 UBY1J202MHL 2200 18× 35.5 0.12 4158 0.023 0.12 5220 3690 UBY1J222MHL 2500 18× 40 0.12 4725 0.021 0.11 5660 3820 UBY1J252MHL 270 12.5×20 0.08 648 0.074 0.56 1640 1420 UBY1K271MHL 390 12.5× 25 0.08 936 0.054 0.39 2520 2050 UBY1K391MHL UBY1K471MHL 470 16× 20 0.08 1128 0.053 0.34 2140 1910 510 12.5× 31.5 0.08 1224 0.042 0.30 3110 2630 UBY1K511MHL 620 12.5× 35.5 0.08 1488 0.038 0.25 3760 2970 UBY1K621MHL 620 18×20 0.08 1488 0.048 0.26 2350 2100 UBY1K621MHL6 680 16×25 0.08 1632 0.038 0.23 2940 2680 UBY1K681MHL 750 12.5× 40 0.08 1800 0.031 0.22 4610 3260 UBY1K751MHL 820 16× 31.5 0.08 1968 0.034 0.20 3860 3050 UBY1K821MHL 820 18× 25 0.08 1968 0.035 0.19 3080 2810 UBY1K821MHL6 1000 16× 35.5 0.08 2400 0.027 0.15 4590 3420 UBY1K102MHL 1100 18× 31.5 0.08 2640 0.028 0.15 4080 3220 UBY1K112MHL 1300 16× 40 0.08 3120 0.025 0.14 5190 3670 UBY1K132MHL 1300 18× 35.5 0.08 3120 0.023 0.12 5220 3690 UBY1K132MHL6 1600 18× 40 0.08 3840 0.021 0.11 5660 3820 UBY1K162MHL 160 12.5×20 0.08 480 0.074 0.56 1640 1420 UBY2A161MHL 220 12.5×25 0.08 660 0.054 0.39 2520 2050 UBY2A221MHL 270 16× 20 0.08 810 0.053 0.34 2140 1910 UBY2A271MHL 300 12.5× 31.5 0.08 900 0.042 0.30 3110 2630 UBY2A301MHL 360 12.5× 35.5 0.08 1080 0.038 0.25 3760 2970 UBY2A361MHL 360 18×20 0.08 1080 0.048 0.26 2350 2100 UBY2A361MHL6 390 16× 25 0.08 1170 0.038 0.23 2940 2680 UBY2A391MHL 430 12.5×40 0.08 1290 0.031 0.22 4610 3260 UBY2A431MHL 470 16×31.5 0.08 1410 0.034 0.20 3860 3050 UBY2A471MHL 510 18×25 0.08 1530 0.035 0.19 3080 2810 UBY2A511MHL 560 16× 35.5 0.08 1680 0.027 0.15 4590 3420 UBY2A561MHL 680 18× 31.5 0.08 2040 0.028 0.15 4080 3220 UBY2A681MHL 750 16× 40 0.08 2250 0.025 0.14 5190 3670 UBY2A751MHL 820 18×35.5 0.08 2460 0.023 0.12 5220 3690 UBY2A821MHL 950 18×40 0.08 2850 0.021 0.11 5660 3820 UBY2A951MHL For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K