UCA2C680MHD

ALUMINUM ELECTROLYTIC CAPACITORS CA Miniature Sized, High Ripple Current, Long Life series High ripple current and Long Life product withstanding load life of 12000 hours(10000 hours for φD=10) at +105°C. Suited for ballast application. PB Long Life CA Smaller Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ CS Performance Characteristics – 25 ~ +105°C 160 ~ 450V 6.8 ~ 220µF ± 20% at 120Hz, 20°C After 1 minutes' application of rated voltage, leakage current is not more than 0.04CV+100 (µA) Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 160 0.15 200 0.15 250 0.15 350 0.20 400 0.20 450 0.20 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 160 3 200 3 250 3 350 6 400 6 450 6 Endurance After an application of D.C. bias voltage plus the rated ripple current for 12000 hours (10000 hours for φD =10) at 105°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Sleeve (P.E.T.) D+0.5MAX. B Type numbering system (Example : 250V 100µF) d U CA 2 E 1 0 1 M HD T P ± 0.5 1 2 3 4 5 6 7 8 9 10 11 12 Pressure relief vent L + 1.5MAX. 15 MIN 4 MIN Size code Configuration Capacitance tolerance (±20%) Rated Capacitance (100µF) Rated voltage (250V) Series name Type B B D 10 12.5 16 18 P 5.0 5.0 7.5 7.5 Bd 0.6 0.6 0.8 0.8 (mm) Configuration Pb-free leadwire BD Pb-free PET sleeve 10 PD 12.5 ~ 18 HD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS CA Cap. (µF) series Dimensions V Code 160 2C 200 2D 250 2E 10 350 2V 400 2G 220 280 10 10 12.5 16 450 2W 220 280 430 600 640 640 840 840 10 12.5 16 18 16 18 6.8 10 22 6R8 100 10 ´ 16 ´ 20 ´ 20 ´ 20 ´ 25 ´ 20 ´ 31.5 ´ 25 ´ 16 ´ 20 ´ 20 ´ 20 ´ 25 ´ 20 ´ 31.5 ´ 25 ´ 31.5 ´ 20 ´ 20 ´ 25 ´ 20 ´ 31.5 ´ 25 ´ 31.5 150 320 560 560 700 700 ´ 16 ´ 20 ´ 20 ´ 20 ´ 25 ´ 20 ´ 25 ´ 20 ´ 31.5 ´ 25 ´ 31.5 ´ 25 250 10 ´ 16 ´ 20 ´ 20 ´ 20 ´ 25 ´ 20 ´ 25 ´ 20 ´ 31.5 ´ 25 ´ 31.5 250 10 ´ 20 ´ 20 ´ 20 ´ 25 ´ 20 ´ 25 ´ 20 ´ 31.5 ´ 25 ´ 31.5 300 10 220 10 500 10 500 12.5 600 12.5 350 33 330 10 565 12.5 600 12.5 630 16 600 16 18 47 470 12.5 725 12.5 780 12.5 16 720 750 1000 920 1400 1345 16 18 16 18 700 750 1100 875 16 18 18 900 68 680 12.5 16 16 18 16 18 16 18 950 970 1280 1180 1360 1360 1400 1400 12.5 16 16 18 16 18 950 970 1280 1180 1360 1360 16 18 16 18 18 1000 100 101 150 151 18 1500 220 221 18 1700 fD ´ Case size L (mm) : Rated Ripple (mArms) at 105¡C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency Coefficient 50Hz 0.40 120Hz 0.50 1kHz 0.80 10kHz 0.90 100kHz ~ 1.00 CAT.8100V