UCA2D101MHD1TN

ALUMINUM ELECTROLYTIC CAPACITORS UCA Miniature Sized, High Ripple Current, Long Life High ripple current and Long Life product withstanding load life of 12000 hours(10000 hours for φD=10) at +105°C. Suited for power supply and ballast application. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UCA UPT Long Life Smaller UCS UCY Specifications Item Performance Characteristics Category Temperature Range –25 to +105°C Rated Voltage Range 160 to 450V Rated Capacitance Range 6.8 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA) Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 160 0.15 200 0.15 250 0.15 350 0.20 400 0.20 450 0.20 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio (MAX.) Dimensions V Shelf Life 6.8 6R8 10 250 3 350 6 100 Radial Lead 22 220Type 10 × 16 250 10 × 16 250 10 × 20 300 10 × 20 500 10 × 20 500 12.5 × 20 600 10 × 20 330 Sleeve (P.E.T.) 68 470 680 Pressure relief vent 100 150 220 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value 151 φD 10 P 5.0 φd 221 0.6 600 12.5 × 20 2 3 4 5 6 640 840 18 × 25 840 18 × 31.5 1000 16 × 20 750 18 × 20 750 16 × 25 1000 16 × 31.5 1100 16 × 20 970 16 × 20 970 18 × 20 920 18 × 25 875 16 × 25 1280 16 × 25 1280 16 × 31.5 1400 18 × 20 1180 18 × 20 1180 18 × 25 1345 16 × 31.5 1360 16 × 31.5 1360 18 × 2516 12.5 1360 18 18 × 25 1360 18 × 31.5 1700 7.5 7.5 0.6 0.8 0.8 18 × 25 1400 1400 16 × 31.5 16 × 31.5 950 700 Size code 700 18 × 25 Configuration 900 18 × tolerance 31.5 Capacitance (±20%) Rated capacitance (100µF) Rated voltage (250V) Series name Type Configuration φD 1500 560 18 × 20 600 12 18 × 20 12.5 × 25 5.0 10 11 700 950 16 × 31.5 9 16 × 25 12.5 × 25 18 × 31.5 16 × 20 720 12.5 × 25 780 (mm) 8 600 630 12.5 × 20 4 MIN 7 U C A 2 E 1 0 1 16M× 25 H D T640 16 × 20 12.5 × 20 320 12.5 × 20 280 560 16 × 25 430 12.5 × 20 Type 350 system (Example : 250V 100µF) 12.5 ×numbering 20 725 15 MIN 10 × 20 280 10 × 20 12.5 × 20 L + 1.5MAX. 101 565 φd P±0.5 φD+0.5MAX. 47 450 6 Capacitance change tan δ Leakage current 1 33 400 6 After then performing voltage JIS C 160 storing the capacitors 200under no load at 105˚C 250 for 1000 hours and 350 400 treatment based on 450 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. 2C 2D 2E 2V 2G 2W Printed with white color letter on dark brown sleeve. 150 10 × 20 220 10 × 16 220 10 × 16 Code Marking 200 3 The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 12000 hours (10000 hours for φD=10) at 105°C, the peak voltage shall not exceed the rated voltage. Endurance Cap. (µF) Z–25°C / Z+20°C 160 3 Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 HD Case size φD × L (mm) : Rated ripple current (mArms) at 105°C 100kHz Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.40 0.50 0.80 0.90 1.00 Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UCA Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 10 160 （2C） 200 （2D） 0.15 Leakage Current Rated Ripple （µA） （mArms） at 20℃ after （105℃/100kHz） 1 minute （ ） 164 250 Part Number UCA2C100MPD 22 10× 20 0.15 240.8 500 UCA2C220MPD 10× 20 0.15 311.2 565 UCA2C330MPD 47 12.5× 20 0.15 400.8 725 UCA2C470MHD 68 12.5× 25 0.15 535.2 950 UCA2C680MHD 68 16× 20 0.15 535.2 970 UCA2C680MHD6 100 16× 25 0.15 740 1280 UCA2C101MHD 100 18× 20 0.15 740 1180 UCA2C101MHD6 150 16× 31.5 0.15 1060 1360 UCA2C151MHD 150 18× 25 0.15 1060 1360 UCA2C151MHD6 220 16× 31.5 0.15 1508 1400 UCA2C221MHD 220 18 ×25 0.15 1508 1400 UCA2C221MHD6 10 10 ×16 0.15 180 250 UCA2D100MPD 22 10 ×20 0.15 276 500 UCA2D220MPD 33 12.5 ×20 0.15 364 600 UCA2D330MHD 47 12.5×20 0.15 476 780 UCA2D470MHD 68 12.5×25 0.15 644 950 UCA2D680MHD 68 16 ×20 0.15 644 970 UCA2D680MHD6 100 16 ×25 0.15 900 1280 UCA2D101MHD 100 18 ×20 0.15 900 1180 UCA2D101MHD6 150 16×31.5 0.15 1300 1360 UCA2D151MHD 150 18×25 0.15 1300 1360 UCA2D151MHD6 18×31.5 0.15 1860 1700 UCA2D221MHD 10 10× 20 0.15 200 300 UCA2E100MPD 22 12.5× 20 0.15 320 600 UCA2E220MHD 33 12.5× 20 0.15 430 630 UCA2E330MHD 47 12.5× 25 0.15 570 720 UCA2E470MHD 47 16× 20 0.15 570 750 UCA2E470MHD6 68 16× 25 0.15 780 1000 UCA2E680MHD 68 18× 20 0.15 780 920 UCA2E680MHD6 100 16× 31.5 0.15 1100 1400 UCA2E101MHD 100 18× 25 0.15 1100 1345 UCA2E101MHD6 150 18× 31.5 0.15 1600 1500 UCA2E151MHD 6.8 350 （2V） 10×16 tan δ 33 220 250 （2E） Case Size φD×L（mm） 10 ×16 0.20 195.2 220 UCA2V6R8MPD 10 10 ×20 0.20 240 280 UCA2V100MPD 22 12.5 ×20 0.20 408 350 UCA2V220MHD 33 16 ×20 0.20 562 600 UCA2V330MHD 47 16 ×25 0.20 758 700 UCA2V470MHD 47 18 ×20 0.20 758 750 UCA2V470MHD6 68 16 ×31.5 0.20 1052 1100 UCA2V680MHD 68 18 ×25 0.20 1052 875 UCA2V680MHD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UCA Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 6.8 400 （2G） tan δ Leakage Current Rated Ripple （µA） （mArms） at 20℃ after （105℃/100kHz） 1 minute （ ） Part Number 10× 16 0.20 208.8 220 UCA2G6R8MPD 10 10× 20 0.20 260 280 UCA2G100MPD 22 12.5× 20 0.20 452 430 UCA2G220MHD 22 16× 20 0.20 452 600 UCA2G220MHD6 33 16× 25 0.20 628 640 UCA2G330MHD 33 18× 20 0.20 628 640 UCA2G330MHD6 47 16× 31.5 0.20 852 840 UCA2G470MHD 47 18× 25 0.20 852 840 UCA2G470MHD6 68 18× 31.5 0.20 1188 1000 UCA2G680MHD 6.8 450 （2W） Case Size φD×L（mm） 10× 20 0.20 222.4 150 UCA2W6R8MPD 10 12.5× 20 0.20 280 320 UCA2W100MHD 22 16× 25 0.20 496 560 UCA2W220MHD 22 18×20 0.20 496 560 UCA2W220MHD6 33 16× 31.5 0.20 694 700 UCA2W330MHD 33 18× 25 0.20 694 700 UCA2W330MHD6 47 18× 31.5 0.20 946 900 UCA2W470MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K