UCB0J470MCL1GS

ALUMINUM  ELECTROLYTIC  CAPACITORS CB Chip Type,  Long Life Assurance series Chip type with load life of 7000 hours at +105°C. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). CB UL Long Life Low Impedance CW Specifications Item Performance Characteristics Category Temperature Range –25 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.1 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.03 CV or 4 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 6.3 0.32 10 0.28 16 0.26 25 0.16 35 0.14 50 0.14 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) 6.3 10 16 25 35 50 4 3 2 2 2 2 Z– 25°C / Z+20°C The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 7000 hours at 105°C. Endurance Capacitance change tan δ Leakage current Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance change Within ±10% of the initial capacitance value maintained at 250°C. The capacitors shall meet the characteristic Less than or equal to the initial specified value tan δ requirements listed at right when they are removed from the plate Less than or equal to the initial specified value Leakage current and restored to 20°C. Shelf Life Resistance to soldering heat Black print on the case top. Marking Chip Type Type numbering system (Example : 16V 100µF) (φ4 to φ6.3) Positive L±0.3 Capacitance Lot No. 3 4 5 6 7 8 9 10 11 12 13 14 Taping code E B±0.2 φD±0.5 A2 100C CB C±0.2 2 A±0.2 A±0.2 0.3MAX. Series 1 UCB 1 C 1 0 1 MC L 1 GS 0.5MAX. Plastic platform Voltage ( C : 16V ) Configuration Capacitance tolerance (±20%) Rated capacitance (100µF) Rated voltage (16V) Negative H φD 4 to 6.3 8 • 10 Code CL NL Series name Type Positive 0.3MAX. C±0.2 E B±0.2 A2 220V CB φD±0.5 Series L±0.5 Lot No. Voltage V 6.3 Code j Capacitance 10 A 16 C Pressure relief vent 25 E 35 V H (mm) φD A±0.2 A±0.2 Plastic platform 0.5MAX. (φ8 to φ10 ) Voltage ( V : 35V ) Trade mark Negative ×L 10 × 10 4×7 5×7 6.3 × 7 6.3 × 8.7 8 × 10 A 1.8 2.1 2.4 2.4 2.9 3.2 B 4.3 5.3 6.6 6.6 8.3 10.3 C 4.3 5.3 6.6 6.6 8.3 10.3 E 1.0 1.3 2.2 2.2 3.1 4.5 L 7.0 7.0 7.0 8.7 10 10 H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 50 H Dimension table in next page. CAT.8100D ALUMINUM  ELECTROLYTIC  CAPACITORS CB series Dimensions Cap.(µF) V 6.3 10 16 25 35 50 Code 0J 1A 1C 1E 1V 1H 0.1 0R1 4 × 7 1.0 0.22 R22 4 × 7 2.6 0.33 R33 4 × 7 3.2 0.47 R47 4 × 7 3.8 1 010 4 × 7 2.2 2R2 4 × 7 11 3.3 3R3 4 × 7 14 4.7 4R7 4 × 7 15 4 × 7 18 5 × 7 25 5 × 7 30 6.3 × 7 42 57 10 100 22 220 33 330 47 470 5 × 7 36 100 101 6.3 × 7 60 220 221 6.3 × 8.7 101 330 331 160 470 471 1000 102 4 × 7 22 8 × 10 5 × 7 8 × 10 48 6.3 × 8.7 63 50 6.3 × 8.7 6.3 × 8.7 81 116 8 × 10 6.2 8 × 10 77 8 × 10 92 10 × 10 10 × 10 151 216 10 × 10 313 6.3 × 7 6.3 × 7 141 10 × 10 35 254 Case size Rated φ D × L (mm) ripple Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100D