UCB1VR47MCL1GS

ALUMINUM  ELECTROLYTIC  CAPACITORS UCB Chip Type,  Long Life Assurance Chip type with load life of 7000 hours at +105°C. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UCB Long Life UUL Low Impedance UCW Specifications Item Performance Characteristics Category Temperature Range –25 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.03 CV or 4 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C 6.3 0.32 Rated voltage (V) tan δ (max.) Tangent of loss angle (tan δ) 10 0.28 16 0.26 25 0.16 35 0.14 50 0.14 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (max.) 6.3 10 16 25 35 50 4 3 2 2 2 2 Z(– 25°C) / Z(+20°C) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 7000 hours at 105°C. Endurance Capacitance change tan δ Leakage current Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance change Within ±10% of the initial capacitance value maintained at 250°C. The capacitors shall meet the characteristic Less than or equal to the initial specified value tan δ requirements listed at right when they are removed from the plate Less than or equal to the initial specified value Leakage current and restored to 20°C. Shelf Life Resistance to soldering heat Black print on the case top. Marking ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Chip Type Type numbering system (Example : 16V 100µF) (φ4 to φ6.3) Positive C±0.2 B±0.2 φD±0.5 A2 100C CB 0.3max. H L±0.3 3 4 5 6 7 8 9 10 11 12 13 14 Taping code Configuration Capacitance tolerance (±20%) φD 4 to 6.3 8 • 10 Rated capacitance (100µF) Rated voltage (16V) Negative Capacitance Lot No. 2 A±0.2 E A±0.2 Series 1 UCB 1 C 1 0 1 MC L 1 GS 0.5max. Plastic platform Voltage ( C : 16V ) Code CL NL Series name Type Positive Plastic platform Series C±0.2 H L±0.5 Lot No. Voltage V 6.3 Code j Capacitance Negative Pressure relief vent (mm) φD A±0.2 E A±0.2 B±0.2 A2 220V CB φD±0.5 0.3max. 0.5max. (φ8,φ10 ) Voltage ( V : 35V ) Trade mark ×L 10 × 10 4×7 5×7 6.3 × 7 6.3 × 8.7 8 × 10 A 1.8 2.1 2.4 2.4 2.9 3.2 B 4.3 5.3 6.6 6.6 8.3 10.3 C 4.3 5.3 6.6 6.6 8.3 10.3 E 1.0 1.3 2.2 2.2 3.1 4.5 L 7.0 7.0 7.0 8.7 10 10 H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Frequency coefficient of rated ripple current 10 A 16 C 25 E 35 V 50 H Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Dimension table in next page. CAT.8100L ALUMINUM  ELECTROLYTIC  CAPACITORS UCB Dimensions Rated Voltage （V） （code） 6.3 （0J） 10 （1A） 16 （1C） 25 （1E） 35 （1V） 50 （1H） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Leakage Current （µA） at 20℃ after 2 minutes （ ） Rated Ripple （mArms） （105℃/120Hz） Part Number 22 4×7 0.32 4.158 22 UCB0J220MCL1GS 47 5× 7 0.32 8.883 36 UCB0J470MCL1GS 100 6.3×7 0.32 60 UCB0J101MCL1GS 18.9 220 6.3×8.7 0.32 41.58 101 UCB0J221MCL1GS 330 8× 10 0.32 62.37 160 UCB0J331MNL1GS 1000 10 ×10 0.32 33 5× 7 0.28 220 8× 10 0.28 189 9.9 66 313 UCB0J102MNL1GS 35 UCB1A330MCL1GS 141 UCB1A221MNL1GS 10 4× 7 0.26 4.8 18 UCB1C100MCL1GS 22 5×7 0.26 10.56 30 UCB1C220MCL1GS 47 6.3×7 0.26 22.56 50 UCB1C470MCL1GS 100 6.3× 8.7 0.26 48 81 UCB1C101MCL1GS 470 10× 10 0.26 225.6 254 UCB1C471MNL1GS 33 6.3× 7 0.16 24.75 48 UCB1E330MCL1GS 47 6.3×8.7 0.16 35.25 63 UCB1E470MCL1GS 100 8× 10 0.16 75 116 UCB1E101MNL1GS 1 4× 7 0.14 4 2.2 4× 7 0.14 4 6.2 11 UCB1V010MCL1GS UCB1V2R2MCL1GS 3.3 4× 7 0.14 4 14 UCB1V3R3MCL1GS 4.7 4× 7 0.14 4.935 15 UCB1V4R7MCL1GS 5× 7 0.14 25 UCB1V100MCL1GS 10 10.5 22 6.3× 7 0.14 23.1 42 UCB1V220MCL1GS 33 6.3× 8.7 0.14 34.65 57 UCB1V330MCL1GS 220 10 ×10 0.14 216 UCB1V221MNL1GS 231 33 8×10 0.14 49.5 77 UCB1H330MNL1GS 47 8× 10 0.14 70.5 92 UCB1H470MNL1GS 100 10 ×10 0.14 151 UCB1H101MNL1GS 150 For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L