UCD1C220MCL6GS

ALUMINUM  ELECTROLYTIC  CAPACITORS U U U U UU 148 U U U 148 148 Specifications Specifications Specifications Item Item Item 153 U U U 153 153 Performance Characteristics Performance Characteristics Performance Characteristics Category Temperature Range – 55 to +105°C – 55 to +105°C Category Temperature Range– 55 to +105°C Category Temperature Range Rated Voltage Range 6.3 to 100V Rated Voltage Range to 100V Rated Voltage Range 6.36.3 to 100V Rated Capacitance Range 1 to 3300µF Rated Capacitance Range 1 to13300µF Rated Capacitance Range to 3300µF ±20% at 120Hz, 20°C Capacitance Tolerance ±20% at 120Hz, 20°C Capacitance Tolerance ±20% at 120Hz, 20°C Capacitance Tolerance Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA), whichever is greater. Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 3 (µA), whichever is greater. Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CVCV or 3or(µA), whichever is greater. Measurement frequency : 120Hz at 20°C Measurement frequency : 120Hz at 20°C Measurement frequency : 120Hz at 20°C 6.3 10 16 25 35 50 63 80 100 Rated voltage (V) Tangent of loss angle (tan δ) 6.3 10 16 25 35 50 63 80 100 Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Rated voltage (V) 0.26 0.19 0.16 0.14 0.12 0.10 0.08 0.08 0.07 Tangent of loss angle Tangent of loss angle (tan(tan δ) δ) tan δ (MAX.) 0.26 0.19 0.16 0.14(φ12.5 0.12 0.10 0.08 0.08 0.08 0.08 0.07 0.07 tan δ (MAX.) of more than 1000µF, add0.26 0.19 0.16 0.14 0.12 tancapacitance δ (MAX.) to φ18)0.10 For 0.02 for every increase of 1000µF. φ18) capacitance of more than 1000µF, 0.02 every increase of 1000µF. (φ12.5 to φto 18) ForFor capacitance of more than 1000µF, addadd 0.02 for for every increase of 1000µF. (φ12.5 6.3 Rated voltage (V) (V) (V) Rated voltage 6.3 Rated voltage 2 6.3 Z—25°C / Z+20°C Stability at Low Temperature Impedance ratio Z—25°C Z—25°C / Z+20°C 2 / Z+20°C Stability at Low Temperature Stability at Low Temperature 3 2 Impedance ratioZ—40°C / Z+20°C Impedance (MAX.)ratio Z—40°C / Z+20°C 4 3 3 Z—40°C / Z+20°C Z+20°C Z—55°C / (MAX. (MAX. ) ) Z—55°C / Z+20°C 4 4 Z—55°C / Z+20°C 25 25 2 25 35 35 2 35 4 4 4 4 3 3 3 3 2 3 2 3 4 3 Plastic platform Plastic platform Plastic 0.3platform MAX. Voltage j : 6.3V ) Voltage ( j : (6.3V ) Series C±0.2 C±0.2 C±0.2 B±0.2 B±0.2 B±0.2 MAX. 0.3 0.3 MAX. φD±0.5 φD±0.5 φD±0.5 A2A2 47 j j A247 CD 47CD j CD 1 Trade mark Series Series 1 Trade mark 1 Trade mark H H H L±0.3 L±0.3 L±0.3 Capacitance Capacitance Capacitance 3 3 3 3 3 3 3 3 3 3 1 12 23 34 45 56 67 78 89 910 10 13 13 14 14 U C D 1 C 1 0 1 M C 11 L 1112 1 12G S UU CC D D1 1C C1 10 01 1M MC CL L1 1G G SS Package code Package code Package code Size Package Code Size PackageCode φSize 4 to 10 Package Taping GSCode φ410 to 10Taping Taping MS φ4 to GS GS φ12.5 18 φ12.5 to 18Taping Taping MSMS φ12.5 to 18 Size code code SizeSize code Configuration Configuration Configuration Capacitance tolerance (±20%) φD Code Capacitance tolerance (±20%) Capacitance tolerance (±20%) φ D Code φ D6.3 4 to CLCode Rated capacitance (100µF) to 6.3 CL CL to46.3 Rated capacitance (100µF) 84 (6.2L) Rated capacitance (100µF) Rated voltage (16V) 8 (6.2L) CL CL 8 (6.2L) Rated voltage (16V) 10(7.7L) Rated voltage (16V) Series name 10(7.7L) 10(7.7L) CL CL • 8 (10L) NL Series name 10(10L,13.5L) Series name 8 (10L) • • 8 (10L) Type NL NL 10(10L,13.5L) Type 10(10L,13.5L) 12.5 to 18 NQ Type L±1.0 L±1.0 L±1.0 A±0.2 E A±0.2 0.5 MAX. 0.5 MAX. A±0.2 E A±0.2 H H H 0.5 MAX. 0.5 MAX. C±0.2 C±0.2 C±0.2 Positive Positive 0.5 MAX. A±0.2 A±0.2 E A±0.2 E A±0.2 Pressure relief vent Pressure Pressure vent vent Series relief relief Series Series H H H B±0.2 φ D±0.5 B±0.2 B±0.2 Pressure 2 L±0.5 relief vent Pressure 2 2 Pressure L±0.5 relief vent L±0.5 relief vent Lot No. Capacitance Capacitance 2 : Except : φ10 × 7.7L Lot Lot No.No. Capacitance 2 : Except : φ10 × 7.7L 2 : Except : φ10 × 7.7L (φ12.5 to φ18) Plastic platform Voltage (φ12.5 to φ18) (φ12.5 to φ18) Plastic platform Plastic platform Trade mark Voltage 0.3 MAX. Voltage Trade mark Lot No. Trade mark 0.3 MAX. 0.3 MAX. Lot Lot No.No. φ D±0.5 φ D±0.5 3 3 3 3 3 Capacitance Change Within ± 30% of the initial capacitance value Capacitance ChangeWithin Within ± 30% ofthe the initial capacitance value Capacitance Change ± less 30% of the initial capacitance value 200% or than initial specified value tan δ 200% or less than initial specified value 200% or less than thethe initial specified value 300% the initial specified value for 63V or more tantan δ δ 300% ororless than specified value or more 300% or less than the initial specified value for for 63V63V or more Leakage current Less than equal tothe theinitial initial specified value Negative Negative Negative B±0.2 B±0.2 B±0.2 φD±0.5 φD±0.5 φD±0.5 A2A2 220E A2220E CD CD 220E CD C±0.2 C±0.2 C±0.2 MAX. 0.3 0.3 MAX. Series Series 330 µF 330 µF 50V 330 µF H1015 H1015 CD 50V H1015 3 3 3 3 3 Type numbering system (Example : 16V 100µF) Type numbering system(Example (Example : 16V 100µF) Type numbering system : 16V 100µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Positive Positive Positive 0.5 MAX. A±0.2A±0.2 E A±0.2 E A±0.2 Plastic platform Plastic platform Plastic 0.3platform MAX. Voltage ( E : 25V ) Series Voltage E : 25V Voltage ( E :( 25V ) ) Trade mark n iCD c h i c50V on CD 2 3 2 3 3 3 1: Size φ8 × 6.2 only 1: Size × 6.2 only 1: Size φ8 ×φ8 6.2 onlyPositive (φ8 × 10, φ10) × 10, φ10) (φ8(φ8 × 10, φ10) Trade mark Trade mark 2 3 2 3 3 3 A±0.2 E A±0.2 (φ4 to φ8 × 6.2) (φ4 × 6.2) to φ8 (φ4 × 6.2) to φ8 Voltage ( j : 6.3V ) 0.5 MAX. 0.5 MAX. Marking Marking Marking A±0.2 A±0.2 E A±0.2 E A±0.20.5 MAX. Resistance to soldering Resistance to soldering Resistance to soldering heat heat heat Lot No. Lot Lot No.No. 2 3 2 3 4 3 Measurement frequency : 120Hz Measurement : 120Hz frequency :100 120Hz 50 Measurement 63 80frequency 50 63 80 100 2 50 2 63 2 80 2 100 2 2 2 2 3 2 3 2 3 2 3 2 Leakage current Leakage current Less than or equal to the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at After storing capacitors under no load atthe 105°C 1000 hours then performing voltage treatment based C 5101-4 clause After storing thethe capacitors under novalues load at for for 1000 hours andand then performing voltage treatment based on on JISJIS C 5101-4 clause 4.14.1 at at 20°C, they shall meet the specified for105°C endurance characteristics listed above. 20°C, they shall meet specified values endurance characteristics listed above. 20°C, they shall meet thethe specified values for for thethe endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance Change Within ± 10% of the initial capacitance value capacitors kept on a hot plate 30 seconds, which TheThe capacitors areare kept oncapacitors a hot plate for for 30 seconds, which is is Capacitance maintained at 250°C. The shall meet the characteristic Change Less Within ±or10% of to the initial capacitance value Change Within ± 10% of the initial capacitance value tanCapacitance δ than equal the initial specified value maintained at 250°C. The capacitors shall meet the characteristic maintained at listed 250°C. meet the from characteristic requirements at The rightcapacitors when theyshall are removed the tan Less than or equal to the initial specified value tan δ δ current Less than or equal to the initial specified value Leakage Less than or equal to the initial specified value requirements listed at right when they are removed from the requirements listed at right when they are removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Leakage current Less than or equal to the initial specified value plate restored to 20°C. plate andand restored to 20°C. Black print on the case top. Black print case Black print on on thethe case top.top. Shelf Life Shelf Shelf LifeLife n i c hni ci cohni c o n 16 16 2 16 The specifications listed at right shall be met when the specifications listed at right shall met when TheThe specifications listed right shall be be met when thethe capacitors are restored toat20°C after the rated voltage is (2000 capacitors are restored to 20°C after rated voltage capacitors restored to 20°C after theLthe rated is is applied for are 5000 hours hours for 10 voltage mm: 50V (63V (2000 applied hours 2000 10 mm: applied for for 5000 hours for for L) atL10 mm: 50V50V or less, and for5000 Lhours 10mm: orhours more 105°C. ) at) 105°C. or less, 10mm: or more at 105°C. or less, andand for for L L10mm: 63V63V or more Endurance Endurance Endurance Capacitance Capacitance Capacitance 10 10 2 10 φD×L A B A C B E C L E H L H A 4.3 3.3 3.3 8.3 2.9 2.9 10.3 3.2 3.2 10.3 3.2 3.2 1.8 1.8 5.3 2.1 2.1 6.6 2.4 2.4 6.6 2.4 2.4 8.3 B 4.3 4.3 5.3 5.3 6.6 6.6 6.6 6.6 8.3 8.3 8.3 8.3 10.310.3 10.310.3 C 4.5 10.3 10.3 4.5 10.3 1.0 8.3 8.3 3.1 8.3 8.3 10.3 4.3 4.3 1.3 5.3 5.3 2.2 6.6 6.6 2.2 6.6 6.6 2.3 E 10 3.1 7.7 10 4.5 5.8 2.3 2.3 3.1 4.5 4.5 4.5 1.0 1.0 5.8 1.3 1.3 5.8 2.2 2.2 7.7 2.2 2.2 6.2 6.2 0.8 10 10 0.87.7 7.7 0.8 10 10 L 0.55.8 5.8 0.55.8 5.8 0.55.8 5.8 0.57.7 7.7 0.56.2 to 0.8 to 1.1 to 1.1 to 1.1 to 0.8 to 0.8 to 0.8 to 0.8 0.50.8 to 0.8 0.81.1 to 1.1 0.81.1 to 1.1 0.81.1 to 1.1 H 0.5 to 0.50.8 to 0.8 0.50.8 to 0.8 0.50.8 to 0.8 0.50.8 to 0.8 0.5 to 0.8 to 0.8 to 0.8 to 0.5 to 0.5 to 0.5 to φD×L 10 × 13.5 12.5 × 13.5 16 × 16.5 18 × 16.5 φ D × Lφ D × L 10 × 13.5 12.5 × 13.5 16 × 16.5 18 × 16.5 10 ×3.213.5 12.54.8 × 13.5 16 ×5.416.5 18 ×6.416.5 A Negative Negative Negative Positive Positive Positive B A C B E C L E H L H Negative Negative Negative A 10.3 3.2 3.2 13.6 4.8 4.8 17.1 5.4 5.4 19.1 6.4 6.4 B 10.310.3 13.613.6 17.117.1 19.119.1 C 10.3 4.5 10.3 13.6 4.0 13.6 17.1 6.3 17.1 19.1 6.3 19.1 E 13.5 4.5 4.5 13.5 4.0 4.0 16.5 6.3 6.3 16.5 6.3 6.3 13.51.013.5 L 0.813.5 13.51.016.5 16.51.016.5 16.5 to 1.1 to 1.4 to 1.4 to 1.4 0.81.1 to 1.1 H 0.8 to 1.01.4 to 1.4 1.01.4 to 1.4 1.01.4 to 1.4 1.0 to 1.0 to 1.0 to Voltage Voltage Voltage V 6.3 φ8 × 10L, φ10 × 10L, φ12.5 × 13.5L, φ16 × 16.5L, φ18 × 16.5L : The vibration structure-resistant also available please ask for details. × 10L, × 10L, φ12.5 × product 13.5L, × 16.5L, ×upon 16.5L : φ8 ×φ8 10L, φ10φ10 × 10L, φ12.5 × 13.5L, φ16φ16 ×is16.5L, φ18φ18 × 16.5L : request, vibration structure-resistant product is also available upon request, please for details. TheThe vibration structure-resistant product is also available upon request, please ask ask for details. Dimension table in next page. to 18 NQNQ 12.512.5 to 18 (mm) 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 6.2 8 × 10 10 × 7.7 10 × 10 (mm) (mm) 8 × 6.28 2.9 8 × 10103.2 4 × 5.85 ×2.15.8 5 × 5.86.32.4 × 10 ×10 10× 10 ×10 7.7× 7.7103.2 4 ×1.85.8 ×6.3 5.8× 5.8 6.32.4 ×6.3 7.7× 7.78 ×3.36.2 φ D × Lφ D × L Code V V 146 Code Code 10 16 25 35 50 63 80 100 j 6.3 10 A 10 16 C 16 25 E 25 35 V 35 50 H 50 63 J 63 80 K 80 100 2A 100 6.3 j j A A C C E E V V H H J J K K 2A 2A ALUMINUM  ELECTROLYTIC  CAPACITORS UCD Dimensions Cap. (µF) V 6.3 10 16 25 35 50 Code 0J 1A 1C 1E 1V 1H 1 010 4 × 5.8 2.70 60 2.2 2R2 4 × 5.8 2.70 60 3.3 3R3 4 × 5.8 2.70 60 4.7 4R7 60 10 100 4 × 5.8 1.35 90 4 × 5.8 1.35 90 15 150 4 × 5.8 1.35 90 5 × 5.8 0.70 160 4 × 5.8 1.35 90 5 × 5.8 0.70 160 5 × 5.8 0.70 160 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 22 220 4 × 5.8 1.35 90 4 × 5.8 1.35 90 27 270 4 × 5.8 1.35 90 5 × 5.8 0.70 160 4 × 5.8 1.35 90 5 × 5.8 0.70 160 33 330 5 × 5.8 0.70 160 4 × 5.8 1.35 90 5 × 5.8 0.70 160 47 470 56 560 5 × 5.8 0.70 68 680 6.3 × 5.8 5 × 5.8 6.3 × 5.8 100 101 160 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 0.36 240 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 0.70 160 0.36 240 240 220 221 6.3 × 5.8 0.36 240 330 331 6.3 × 7.7 0.32 8 × 6.2 0.26 390 391 1000 0.70 160 0.36 681 5 × 5.8 240 6.3 × 5.8 680 240 0.36 151 471 0.36 6.3 × 5.8 150 470 6.3 × 5.8 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 1.35 90 5 × 5.8 1.50 90 5 × 5.8 0.70 160 6.3 × 5.8 0.86 170 5 × 5.8 0.70 160 6.3 × 5.8 0.86 170 6.3 × 5.8 0.36 240 6.3 × 7.7 0.66 195 8 × 6.2 0.63 200 6.3 × 7.7 0.66 195 8 × 6.2 0.63 200 0.36 240 240 6.3 × 7.7 0.32 290 290 6.3 × 7.7 0.32 290 8 × 10 0.32 350 0.26 300 8 × 10 0.16 600 10 × 7.7 0.36 330 8 × 10 0.16 600 8 × 10 0.16 600 10 × 7.7 0.18 600 10 × 7.7 0.18 600 10 × 10 0.16 700 10 × 10 0.16 700 0.36 240 240 6.3 × 5.8 0.36 240 240 6.3 × 5.8 0.36 6.3 × 7.7 0.32 8 × 6.2 0.32 290 6.3 × 7.7 0.32 290 6.3 × 7.7 0.32 290 8 × 10 0.16 600 8 × 10 0.16 600 8 × 6.2 0.26 300 8 × 6.2 0.26 300 10 × 7.7 0.18 600 10 × 7.7 0.18 600 290 8 × 10 0.16 600 8 × 10 0.16 600 300 10 × 7.7 0.18 600 10 × 7.7  0.18 600 8 × 10 0.16 600 10 × 10 0.08 850 600 8 × 10 0.16 600 10 × 7.7 0.18 600 10 × 7.7 0.18 10 × 10 8 × 10 0.16 600 600 10 × 7.7  0.18 600 0.08 850 10 × 10 0.08 850 0.16 600 0.18 600 102 8 × 10 0.16 600 10 × 10 0.08 850 10 × 13.5 0.08 1500 152 10 × 10 0.08 850 10 × 13.5 0.08 950 12.5 × 13.5 0.08 2200 222 10 × 13.5 0.08 0.08 1100 3300 332 12.5 × 13.5 0.08 V 63 80 Cap. (µF) Code 1J 1K 3.3 3R3 4.7 4R7 950 12.5 × 13.5 10 × 10 0.08 850 10 × 13.5 0.08 950 950 12.5 × 13.5 0.08 1100 50 1.50 80 6.3 × 7.7 1.20 120 8 × 6.2 1.20 120 0.08 950 12.5 × 13.5 0.08 1100 12.5 × 13.5 0.08 1100 10 × 13.5 10 × 13.5 0.14 800 12.5 × 13.5 0.12 900 12.5 × 13.5 0.12 900 16 × 16.5 0.073 1610 16 × 16.5 0.073 1610 16 × 16.5 0.035 1800 1100 16 × 16.5 0.035 1800 1100 6.3 × 5.8 Case size Rated Impedance φD × L ripple (mm) 100 2A 5 × 5.8 5.00 25 6.3 × 5.8 3.00 40 6.3 × 7.7 2.40 60 8 × 6.2 2.40 60 8 × 10 1.30 130 22 220 33 330 8 × 10 0.65 250 8 × 10 1.30 47 470 8 × 10 0.65 250 10 × 10 0.70 68 680 10 × 10 0.35 400 12.5 × 13.5 100 101 10 × 10 0.35 150 151 12.5 × 13.5 220 221 12.5 × 13.5 330 331 470 471 16 × 16.5 0.082 1410 680 681 18 × 16.5 8 × 10 1.30 130 130 10 × 10 0.70 200 200 12.5 × 13.5 0.32 500 0.32 500 12.5 × 13.5 0.32 500 400 12.5 × 13.5 0.32 500 16 × 16.5 0.17 793 0.16 800 12.5 × 13.5 0.32 500 16 × 16.5 0.17 793 0.16 800 18 × 16.5 0.15 917 0.15 917 0.08 4 × 5.8 6.3 × 7.7 8 × 10 100 2.70 240 10 × 7.7 10 4 × 5.8 0.36 0.16 3.00 90 6.3 × 5.8 8 × 10 5 × 5.8 1.35 6.3 × 5.8 6.3 × 5.8 240 4 × 5.8 16 × 16.5 0.17 793 18 × 16.5 18 × 16.5 0.15 917 Case size Rated Impedance φD × L ripple (mm) 1690 Max. Impedance ( Ω) at 20°C 100kHz, Rated ripple current (mArms) at 105°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Coefficient 0.35 0.50 0.64 0.83 1.00 147 Taping specifications are given in page 23. Recommended land size, soldering by refrow are given in page 18, 19. Please refer to page 3 for the minimum order quantity.