UCL1A331MCL6GS

ALUMINUM ELECTROLYTIC CAPACITORS UU UU U U Smaller Higher capacitance UCM Specifications Specifications Item Item Performance Performance Characteristics Characteristics – 55 to – 55 +105°C to +105°C Category Category Temperature Temperature Range Range 6.3 to6.3 50V to 50V RatedRated Voltage Voltage Range Range 2200µF to 2200µF RatedRated Capacitance Capacitance Range Range 10 to 10 Capacitance Capacitance Tolerance Tolerance ± 20% ± 20% at 120Hz, at 120Hz, 20°C 20°C Leakage Leakage Current Current After After 2 minutes' 2 minutes' application application of rated of rated voltages voltages at 20°C, at 20°C, leakage leakage current current is notismore not more than 0.01 than CV 0.01orCV 3 (µA), or 3 (µA), whichever whichever is greater. is greater. Measurement Measurement frequency frequency : 120Hz : 120Hz at 20°C at 20°C (V) (V) RatedRated voltage voltage Tangent Tangent of loss of angle loss angle (tan δ) (tan δ) (MAX. ) ) tan δ tan δ (MAX. 6.3 6.3 0.26 0.26 (V) (V) RatedRated voltage voltage 6.3 6.3 10 10 0.19 0.19 16 16 0.16 0.16 25 25 0.14 0.14 35 35 0.12 0.12 50 50 0.10 0.10 Measurement Measurement frequency frequency : 120Hz : 120Hz Stability Stability at Low at Temperature Low Temperature Z—25°C Z—25°C / Z+20°C / Z+20°C Impedance Impedance ratio ratio Z—40°C Z—40°C / Z+20°C / Z+20°C ) ) ZT / Z20 ZT /(Z20 MAX.(MAX. Z—55°C Z—55°C / Z+20°C / Z+20°C 10 10 16 16 25 25 35 35 50 50 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 3 3 3 3 3 3 Endurance Endurance Capacitance Change Change WithinWithin ± 30% ± 30% of theofinitial the initial capacitance capacitance valuevalue The specifications The specifications listedlisted at right at shall right shall be met bewhen met when the the Capacitance capacitors capacitors are restored are restored to 20°C to 20°C after after the rated the rated voltage voltage is istan δ tan δ 200%200% or less or than less the thaninitial the initial specified specified valuevalue applied applied for 2000 for 2000 hourshours at 105°C. at 105°C. Leakage Leakage current current Less Less than or than equal or equal to thetoinitial the initial specified specified valuevalue ShelfShelf Life Life After After storing storing the capacitors the capacitors underunder no load no at load 105°C at 105°C for 1000 for 1000 hourshours and then and performing then performing voltage voltage treatment treatment basedbased on JIS onCJIS 5101-4 C 5101-4 clause clause 4.1 at4.1 at 20°C,20°C, they shall they shall meet meet the specified the specified values values for the forendurance the endurance characteristics characteristics listedlisted above. above. Resistance Resistance to soldering to soldering heat heat The capacitors The capacitors are kept are on kept a hot on aplate hot plate for 30for seconds, 30 seconds, whichwhich is is Capacitance Within ± 10% ± 10% of theofinitial the initial capacitance capacitance valuevalue Capacitance Change ChangeWithin maintained maintained at 250°C. at 250°C. The capacitors The capacitors shall shall meet meet the characteristic the characteristic Less Less than than or equal or equal to thetoinitial the initial specified specified valuevalue tan δ tan δ requirements requirements listedlisted at right at when right when they are theyremoved are removed from from the plate the plate Less Less than than or equal or equal to thetoinitial the initial specified specified valuevalue Leakage Leakage current current and restored and restored to 20°C to 20°C . . Marking Marking BlackBlack print on print theoncase the case top. top. Type Type numbering numbering system system (Example (Example : 16V : 16V 100µF) 100µF) ChipChip Type Type (φ4 to (φ4 φ8to× φ8 6.2) × 6.2) Positive Positive H L±0.3L±0.3 Capacitance Capacitance B±0.2 B±0.2 φD±0.5 φD±0.5 A2 100C A2 CL 100C CL Lot No. Lot No. 0.5 MAX. A±0.2 E A±0.2 C±0.2C±0.2 0.3 MAX. SeriesSeries name name 0.3 MAX. 1 Trade 1 Trade mark mark 1 2 1 3 2 43 5 4 65 7 6 8 7 98 109 1110 1211 1312 1413 14 U CULC 1L C1 1C 01 10 M1 C M LC 1L G1 SG S Configuration Configuration Capacitance Capacitance tolerance tolerance (±20%) (±20%) φ D φ D Code Code 4 to 6.3CL CL RatedRated capacitance capacitance (100µF) (100µF)4 to 6.3 8 (6.2L) 8 (6.2L)CL CL RatedRated voltage voltage (16V)(16V) 10(7.7L) 10(7.7L)CL CL SeriesSeries namename8 (10L) • • 8 (10L) NL NL 10(10L,13.5L) 10(10L,13.5L) Type Type H Negative Negative 1: Size1:φ8 Size × 6.2 φ8 only × 6.2 only Lot No. Lot No. H 2 : Except 2 : Except : φ10 ×: φ10 7.7L× 7.7L Voltage Voltage V V 6.3 CodeCode j 6.3 10 10 16 16 25 25 35 35 50 50 j A A C C E E V V H H H (mm) (mm) 0.5 MAX. 0.5 MAX. B±0.2 2 2 Pressure Pressure relief vent relief vent L±0.5L±0.5 Capacitance Capacitance A±0.2 E A±0.2 C±0.2C±0.2 0.3 MAX. 0.3 MAX. φD±0.5 φD±0.5 A2 220E A2 CL 220E CL SeriesSeries name name B±0.2 Voltage Voltage (E : 25V (E ): 25V ) TradeTrade mark mark Positive Positive PlasticPlastic platform platform φD×L φD×L × 6.28 × 6.2 8 × 10 8 ×10 10× 7.710 ×10 7.7× 1010 ×1010× 13.5 10 × 13.5 4 × 5.84 × 5.8 5 × 5.85 ×6.3 5.8× 5.8 6.3 ×6.3 5.8× 7.7 6.3 ×87.7 A±0.2 E A±0.2 (φ8 ×(φ8 10,×φ10) 10, φ10) TapingTaping code code Size code Size code A±0.2 E A±0.2 0.5 MAX. PlasticPlastic platform platform Voltage Voltage (C : 16V (C ): 16V ) Negative Negative A A 1.8 1.8 2.1 2.1 2.4 2.4 2.4 2.4 3.3 3.3 2.9 2.9 3.2 3.2 3.2 3.2 3.2 3.2 B B 4.3 4.3 5.3 5.3 6.6 6.6 6.6 6.6 8.3 8.3 8.3 8.3 10.3 10.310.3 10.310.3 10.3 C C 4.3 4.3 5.3 5.3 6.6 6.6 6.6 6.6 8.3 8.3 8.3 8.3 10.3 10.310.3 10.310.3 10.3 E E 1.0 1.0 1.3 1.3 2.2 2.2 2.2 2.2 2.3 2.3 3.1 3.1 4.5 4.5 4.5 4.5 4.5 L L 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 6.2 6.2 10 10 7.7 7.7 10 10 13.5 13.5 H 0.81.1 to 1.1 0.8 to H 0.50.8 to 0.8 0.5 to 0.80.8 to 1.1 0.8 to 0.81.1 to 1.1 0.8 to 0.81.1 to 1.1 0.8 to 1.1 0.5 to 0.8 0.5 to 0.50.8 to 0.8 0.5 to 0.50.8 to 0.8 0.5 to 0.50.8 to 0.8 0.5 to 4.5 Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Coefficient 0.35 0.50 0.64 0.83 1.00 Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UCL Dimensions Rated Voltage （V） （code） 6.3 （0J） 10 （1A） 16 （1C） Rated Capacitance （µF） Leakage Current Impedance（Ω） Rated Ripple （µA） （mArms） MAX. at 20℃ after （20℃/100kHz） （105℃/100kHz） 2 minutes Case Size φD×L（mm） tan δ 22 4× 5.8 0.26 3 0.85 160 UCL0J220MCL1GS 47 4× 5.8 0.26 3 0.85 160 UCL0J470MCL6GS 47 5× 5.8 0.26 3 0.36 240 UCL0J470MCL1GS （ ） Part Number 100 5×5.8 0.26 6.3 0.36 240 UCL0J101MCL6GS 100 6.3× 5.8 0.26 6.3 0.26 300 UCL0J101MCL1GS 220 6.3× 5.8 0.26 13.86 0.26 300 UCL0J221MCL1GS 330 6.3× 7.7 0.26 20.79 0.16 600 UCL0J331MCL1GS 330 8× 6.2 0.26 20.79 0.18 500 UCL0J331MCL6GS 470 8× 10 0.26 29.61 0.08 850 UCL0J471MNL1GS 470 10× 7.7 0.26 29.61 0.10 850 UCL0J471MCL6GS UCL0J102MNL1GS 1000 8× 10 0.26 63 0.08 850 1500 10× 10 0.26 94.5 0.06 1190 UCL0J152MNL1GS 1800 10× 10 0.26 113.4 0.08 850 UCL0J182MNL1GS 2200 10× 13.5 0.26 138.6 0.06 1190 UCL0J222MNL1GS 22 4× 5.8 0.19 3 0.85 160 UCL1A220MCL1GS 33 4× 5.8 0.19 3.3 0.85 160 UCL1A330MCL6GS 33 5× 5.8 0.19 3.3 0.36 240 UCL1A330MCL1GS 4.7 47 6.3× 5.8 0.19 0.26 300 UCL1A470MCL1GS 100 6.3× 5.8 0.19 10 0.26 300 UCL1A101MCL1GS 150 6.3× 5.8 0.19 15 0.26 300 UCL1A151MCL1GS 220 6.3× 7.7 0.19 22 0.16 600 UCL1A221MCL1GS 220 8× 6.2 0.19 22 0.18 500 UCL1A221MCL6GS 330 8× 10 0.19 33 0.08 850 UCL1A331MNL1GS 330 10× 7.7 0.19 33 0.10 850 UCL1A331MCL6GS 470 8× 10 0.19 47 0.08 850 UCL1A471MNL1GS 470 10× 7.7 0.19 47 0.10 850 UCL1A471MCL6GS 680 8× 10 0.19 68 0.08 850 UCL1A681MNL1GS 1000 10× 10 0.19 100 0.06 1190 UCL1A102MNL1GS 1200 10× 10 0.19 120 0.08 850 UCL1A122MNL1GS 1500 10× 13.5 0.19 150 0.06 1190 UCL1A152MNL1GS 10 4× 5.8 0.16 3 0.85 160 UCL1C100MCL1GS 22 4× 5.8 0.16 3.52 0.85 160 UCL1C220MCL6GS 22 5× 5.8 0.16 3.52 0.36 240 UCL1C220MCL1GS 47 5× 5.8 0.16 7.52 0.36 240 UCL1C470MCL6GS 47 6.3× 5.8 0.16 7.52 0.26 300 UCL1C470MCL1GS 68 6.3× 5.8 0.16 10.88 0.26 300 UCL1C680MCL1GS 100 6.3× 5.8 0.16 16 0.26 300 UCL1C101MCL1GS 100 6.3× 7.7 0.16 16 0.16 600 UCL1C101MCL6GS 150 6.3× 7.7 0.16 24 0.16 600 UCL1C151MCL1GS 220 6.3× 7.7 0.16 35.2 0.16 600 UCL1C221MCL1GS 220 8× 6.2 0.16 35.2 0.18 500 UCL1C221MCL6GS UCL1C331MNL1GS 330 8×10 0.16 52.8 0.08 850 330 10 ×7.7 0.16 52.8 0.10 850 UCL1C331MCL6GS 470 8×10 0.16 75.2 0.08 850 UCL1C471MNL1GS 470 10 ×7.7 0.16 75.2 0.10 850 UCL1C471MCL6GS 680 10 ×10 0.16 108.8 0.06 1190 UCL1C681MNL1GS 820 10 ×10 0.16 131.2 0.08 850 UCL1C821MNL1GS 10 ×13.5 0.16 160 0.06 1190 UCL1C102MNL1GS 1000 CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UCL Dimensions Rated Voltage （V） （code） 25 （1E） 35 （1V） 50 （1H） Leakage Current Impedance（Ω） Rated Ripple （µA） （mArms） MAX. at 20℃ after （20℃/100kHz） （105℃/100kHz） 2 minutes Rated Capacitance （µF） Case Size φD×L（mm） tan δ 10 4×5.8 0.14 3 0.85 160 UCL1E100MCL1GS 22 5×5.8 0.14 5.5 0.36 240 UCL1E220MCL1GS 33 5×5.8 0.14 8.25 0.36 240 UCL1E330MCL6GS 33 6.3×5.8 0.14 8.25 0.26 300 UCL1E330MCL1GS 47 6.3×5.8 0.14 11.75 0.26 300 UCL1E470MCL1GS 68 6.3×5.8 0.14 17 0.26 300 UCL1E680MCL1GS （ ） Part Number 100 6.3× 7.7 0.14 25 0.16 600 UCL1E101MCL1GS 100 8× 6.2 0.14 25 0.18 500 UCL1E101MCL6GS 150 8×10 0.14 37.5 0.08 850 UCL1E151MNL1GS UCL1E151MCL6GS 150 10 ×7.7 0.14 37.5 0.10 850 220 8×10 0.14 55 0.08 850 UCL1E221MNL1GS 220 10×7.7 0.14 55 0.10 850 UCL1E221MCL6GS 330 8×10 0.14 82.5 0.08 850 UCL1E331MNL1GS 470 10× 10 0.14 117.5 0.06 1190 UCL1E471MNL1GS 560 10× 10 0.14 140 0.08 850 UCL1E561MNL1GS 680 10× 13.5 0.14 170 0.06 1190 UCL1E681MNL1GS 10 4× 5.8 0.12 3.5 0.85 160 UCL1V100MCL6GS 10 5×5.8 0.12 3.5 0.36 240 UCL1V100MCL1GS 22 5×5.8 0.12 7.7 0.36 240 UCL1V220MCL1GS 33 6.3×5.8 0.12 11.55 0.26 300 UCL1V330MCL1GS 47 6.3×5.8 0.12 16.45 0.26 300 UCL1V470MCL1GS 68 6.3×7.7 0.12 23.8 0.16 600 UCL1V680MCL1GS 100 6.3× 7.7 0.12 35 0.16 600 UCL1V101MCL6GS 100 8×10 0.12 35 0.08 850 UCL1V101MNL1GS 150 8×10 0.12 52.5 0.08 850 UCL1V151MNL1GS 150 10 ×7.7 0.12 52.5 0.10 850 UCL1V151MCL6GS 220 8×10 0.12 77 0.08 850 UCL1V221MNL1GS 220 10×7.7 0.12 77 0.10 850 UCL1V221MCL6GS 330 10× 10 0.12 115.5 0.06 1190 UCL1V331MNL1GS 390 10× 10 0.12 136.5 0.08 850 UCL1V391MNL1GS 470 10× 13.5 0.12 164.5 0.06 1190 UCL1V471MNL1GS 100 8× 10 0.10 50 0.18 670 UCL1H101MNL1GS 220 10 ×10 0.10 110 0.12 900 UCL1H221MNL1GS For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K