UCPW6330MPD

ALUMINUM ELECTROLYTIC CAPACITORS UCP High Voltage, Miniature sized, Long Life Assurance High ripple current. Load life of 10000 hours at 105°C. Suited for ballast applications. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UCS Smaller UCP Specifications Item Performance Characteristics Category Temperature Range – 40 to +105°C Rated Voltage Range 400 to 450V Rated Capacitance Range 27 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current ※ After 1 minute's application of rated voltage at 20°C, leakage current is not more than I=0.04CV+100 (µA). Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) 400 0.24 Rated voltage (V) tan δ (max.) 420 0.24 450 0.24 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio (max.) Z(–25°C) / Z(+20°C) 400 8 420 8 450 8 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 10000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Type numbering system (Example : 400V 220µF) Radial Lead Type φd 1 Sleeve (PET) 2 3 4 5 6 7 8 9 10 11 12 Size code P±0.5 φD±0.5max. U C P 2 G 2 2 1 M HD T Configuration Capacitance tolerance (±20%) (mm) Pressure relief vent L±2.0 15min. 4min. Rated capacitance (220µF) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 Rated voltage (400V) φd 0.6 0.8 0.8 0.8 Series name  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Type Configuration φD 10 Pb-free leadwire Pb-free PET sleeve 12.5 to 18 HD PD Frequency coefficient of rated ripple current Frequency 60Hz 120Hz 500Hz 1kHz 10kHz or more Coefficient 0.80 1.00 1.25 1.40 1.50 Dimension table in next page. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UCP Dimensions Rated Voltage （V） （code） 400 （2G） 420 （W6） 450 （2W） Rated Capacitance （µF） Leakage Current （µA） at 20℃ after 1 minute Rated Ripple （mArms） （105℃/120Hz） Part Number 628 330 UCP2G330MPD 0.24 996 470 UCP2G560MHD 12.5× 35.5 0.24 1188 540 UCP2G680MHD 12.5× 40 0.24 1412 620 UCP2G820MHD Case Size φD×L（mm） tan δ 33 10× 31.5 0.24 56 12.5×31.5 68 82 （ ） 100 16× 31.5 0.24 1700 710 UCP2G101MHD 120 16× 35.5 0.24 2020 800 UCP2G121MHD 150 16× 40 0.24 2500 920 UCP2G151MHD 150 18× 31.5 0.24 2500 890 UCP2G151MHD6 180 18× 40 0.24 2980 1060 UCP2G181MHD 220 18× 46 0.24 3620 1200 UCP2G221MHD 33 10× 31.5 0.24 654.4 320 UCPW6330MPD 56 12.5× 31.5 0.24 1040.8 460 UCPW6560MHD 100 16× 31.5 0.24 1780 690 UCPW6101MHD 120 16× 35.5 0.24 2116 780 UCPW6121MHD 120 18× 31.5 0.24 2116 800 UCPW6121MHD6 150 18× 35.5 0.24 2620 920 UCPW6151MHD 180 18× 40 0.24 3124 1040 UCPW6181MHD 27 10× 31.5 0.24 586 300 UCP2W270MPD 47 12.5× 31.5 0.24 946 430 UCP2W470MHD 56 12.5× 35.5 0.24 1108 490 UCP2W560MHD 68 12.5× 40 0.24 1324 560 UCP2W680MHD 82 16× 31.5 0.24 1576 640 UCP2W820MHD 100 16× 35.5 0.24 1900 730 UCP2W101MHD 120 16× 40 0.24 2260 820 UCP2W121MHD 120 18× 31.5 0.24 2260 800 UCP2W121MHD6 150 18× 40 0.24 2800 970 UCP2W151MHD 180 18× 46 0.24 3340 1090 UCP2W181MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L