UCQ1C100MCL1GB

ALUMINUM ELECTROLYTIC CAPACITORS UCQ Chip Type, For Audio Equipment Wide Temperature Range Chip type acoustic series within the wide temperature range. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 10 to 35V Rated Capacitance Range 4.7 to 680µF Capacitance Tolerance ± 20% (120Hz, 20°C) After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Leakage Current Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) 10 0.26 Rated voltage (V) tan δ (MAX.) 16 0.22 25 0.16 35 0.13 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio (MAX.) Z– 25°C / Z+20°C Z– 40°C / Z+20°C 10 3 5 35 2 3 25 2 3 16 2 4 The specifications listed at right shall be met when Capacitance change Within ± 30% of the initial capacitance value the capacitors are restored to 20°C after the rated tan δ 300% or less than the initial specified value voltage is applied for 2000 hours (1000 hours for Less than or equal to the initial specified value Leakage current 4.5L ) at 105°C. After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, Capacitance change Within ±10% of the initial capacitance value which is maintained at 250°C. The capacitors shall meet Less than or equal to the initial specified value tan δ the characteristic requirements listed at right when they Less than or equal to the initial specified value Leakage current are removed from the plate and restored to 20°C. Endurance Shelf Life Resistance to soldering heat Black print on the case top. Marking Chip Type Type numbering system (Example : 35V 4.7µF) (φ4 × 4.5L, φ5 × 4.5L, φ6.3 × 4.5L) Plastic platform L Capacitance C±0.2 B±0.2 φD±0.5 A2 4.7V CQ 0.3MAX. 1 2 3 4 5 6 7 8 9 13 14 Taping code Size code Configuration Capacitance tolerance (±20%) φD code 4.5L GB φ6.3×5.8L /7.7L GS 8・10 GS Rated capacitance (4.7μF ) H +0.1 -0.2 10 11 12 UCQ 1 V 4 R 7 MC L 1 GB A±0.3 E A±0.3 Series 0.5MAX. Positive Voltage (V : 35V ) Lot No. Rated voltage (35V ) Negative Series name (φ6.3 × 5.8L, φ6.3 × 7.7L) Type Plastic platform Negative Series Lot No. Capacitance 0.3MAX. C±0.2 B±0.2 φD±0.5 A2 680A CQ Trade mark Plastic platform L±0.5 0.5MAX. Positive (φ8 × 10L, φ10 × 10L) Voltage (A : 10V ) (mm) H L±0.3 Capacitance C±0.2 B±0.2 φD±0.5 A2 100A CQ 0.3MAX. A±0.2 E A±0.2 Series A±0.2 E A±0.2 Lot No. 0.5MAX. Positive Voltage (A : 10V ) H Negative φD×L A B C E L H 10 × 10 5 × 4.5 6.3 × 4.5 6.3 × 5.8 6.3 × 7.7 8 × 10 4 × 4.5 1.8 2.1 2.4 2.4 2.4 2.9 3.2 4.3 5.3 6.6 6.6 6.6 8.3 10.3 4.3 5.3 6.6 6.6 6.6 8.3 10.3 1.0 1.3 2.2 2.2 2.2 3.1 4.5 4.5 4.5 4.5 5.8 7.7 10 10 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Rated voltage V 10 16 25 35 Code A C E V Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UCQ Dimensions Rated Voltage （V） （code） 10 （1A） 16 （1C） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 22 5×4.5 0.26 Part Number 3 30 UCQ1A220MCL1GB （ ） 33 5× 4.5 0.26 3.3 30 UCQ1A330MCL1GB 6.3×4.5 0.26 4.7 40 UCQ1A470MCL1GB 100 6.3× 5.8 0.26 10 100 UCQ1A101MCL1GS 220 6.3× 7.7 0.26 22 120 UCQ1A221MCL1GS 330 8× 10 0.26 33 250 UCQ1A331MCL1GS 470 8× 10 0.26 47 250 UCQ1A471MCL1GS 680 10× 10 0.26 68 400 UCQ1A681MCL1GS 10 4×4.5 0.22 3 15 UCQ1C100MCL1GB 22 5×4.5 0.22 3.52 30 UCQ1C220MCL1GB 33 6.3×4.5 0.22 5.28 40 UCQ1C330MCL1GB 47 6.3×4.5 0.22 40 UCQ1C470MCL1GB 100 6.3×5.8 0.22 16 100 UCQ1C101MCL1GS 220 8×10 0.22 35.2 250 UCQ1C221MCL1GS 7.52 330 8×10 0.22 52.8 250 UCQ1C331MCL1GS 470 10× 10 0.22 75.2 400 UCQ1C471MCL1GS 4×4.5 0.16 3 15 UCQ1E4R7MCL1GB 10 5× 4.5 0.16 3 30 UCQ1E100MCL1GB 22 6.3× 4.5 0.16 5.5 40 UCQ1E220MCL1GB 33 6.3×4.5 0.16 8.25 40 UCQ1E330MCL1GB 47 6.3×5.8 0.16 11.75 100 UCQ1E470MCL1GS 100 6.3× 7.7 0.16 25 120 UCQ1E101MCL1GS 220 8× 10 0.16 55 250 UCQ1E221MCL1GS 330 10 ×10 0.16 82.5 400 UCQ1E331MCL1GS 470 10 ×10 0.16 117.5 400 UCQ1E471MCL1GS 4×4.5 0.13 3 15 UCQ1V4R7MCL1GB 5×4.5 0.13 3.5 30 UCQ1V100MCL1GB 4.7 10 35 （1V） Rated Ripple （mArms） （105℃/120Hz） 47 4.7 25 （1E） Leakage Current （µA） at 20℃ after 2 minutes 22 6.3×4.5 0.13 7.7 40 UCQ1V220MCL1GB 33 6.3×5.8 0.13 11.55 100 UCQ1V330MCL1GS 47 6.3×7.7 0.13 16.45 120 UCQ1V470MCL1GS 100 8× 10 0.13 35 250 UCQ1V101MCL1GS 220 10× 10 0.13 77 400 UCQ1V221MCL1GS 330 10× 10 0.13 115.5 400 UCQ1V331MCL1GS For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K