UCS2G151MHD

ALUMINUM ELECTROLYTIC CAPACITORS CS Miniature Sized, High Ripple Current, Long Life series High ripple current and Long Life product withstanding load life of 8000 to 10000 hours at +105°C. Suited for ballast application. Adapted to the RoHS directive (2002/95/EC). CA Smaller CS Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Performance Characteristics – 40 ~ +105°C (160 ~ 400V) , – 25 ~ +105°C (450V) 160 ~ 450V 6.8 ~ 330µF ± 20% at 120Hz, 20°C After 1 minutes' application of rated voltage, leakage current is not more than 0.04CV+100 (µA) Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 160 0.20 200 0.20 250 0.20 350 0.24 400 0.24 450 0.24 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z– 25°C / Z+20°C Z– 40°C / Z+20°C 160 3 6 200 3 6 250 3 6 350 5 6 400 5 6 450 6 -- Endurance After an application of D.C. bias voltage plus the rated ripple current for 10000 hours (8000 hours for φ D =10) at 105°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Sleeve (P.E.T.) D+0.5MAX. B Type numbering system (Example : 250V 100µF) d U CS 2 E 1 0 1 M HD T P ± 0.5 1 2 3 4 5 6 7 8 9 10 11 12 Pressure relief vent L + 1.5MAX. 15 MIN 4 MIN Size code Configuration Capacitance tolerance (±20%) Rated Capacitance (100µF) Rated voltage (250V) Series name Type B B D 10 12.5 16 18 P 5.0 5.0 7.5 7.5 Bd 0.6 0.6 0.8 0.8 (mm) Configuration Pb-free leadwire BD Pb-free PET sleeve 10 PD 12.5 ~ 18 HD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS CS Cap series Dimensions V Code 160 2C 200 2D 250 2E 10 350 2V 400 2G 280 350 10 10 12.5 450 2W 280 350 550 760 10 12.5 12.5 16 16 18 6.8 10 15 22 33 6R8 100 150 220 10 10 ´ 16 ´ 20 ´ 20 ´ 20 ´ 20 ´ 25 ´ 20 ´ 25 ´ 25 ´ 16 ´ 20 ´ 20 ´ 20 ´ 20 ´ 25 ´ 20 ´ 25 ´ 25 ´ 20 ´ 20 ´ 25 ´ 20 ´ 25 ´ 20 ´ 25 ´ 31.5 280 450 600 730 980 980 ´ 16 ´ 20 ´ 20 ´ 20 ´ 20 ´ 20 ´ 25 ´ 20 ´ 20 ´ 25 ´ 31.5 320 10 ´ 16 ´ 20 ´ 20 ´ 20 ´ 20 ´ 20 ´ 20 ´ 25 ´ 25 ´ 35.5 320 10 ´ 20 ´ 20 ´ 20 ´ 20 ´ 20 ´ 20 ´ 25 ´ 25 ´ 31.5 350 10 500 10 500 10 500 12.5 650 12.5 330 10 650 10 650 12.5 800 16 900 16 900 47 470 10 750 12.5 980 12.5 980 16 1080 16 18 1180 1180 18 1200 68 82 100 150 220 330 680 12.5 1180 12.5 1300 16 1300 16 18 1400 1375 1530 18 1470 18 1575 820 12.5 12.5 16 1275 1420 1420 1890 2370 3130 16 1380 16 1380 18 18 1525 101 16 1420 16 1530 18 1575 151 221 331 16 16 18 16 18 18 1890 2365 3220 18 18 1940 3130 Case size fD ´ L (mm) : Rated Ripple (mArms) at 105¡C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency Coefficient 50Hz 0.40 120Hz 0.50 1kHz 0.80 10kHz 0.90 100kHz ~ 1.00 CAT.8100V