UCS2G470MHD6

ALUMINUM ELECTROLYTIC CAPACITORS UCS Miniature Sized, High Ripple Current, High Reliability UCA High ripple current and Long Life product withstanding load life of 8000 to 10000 hours at +105°C. Suited for ballast application. Compliant to the RoHS directive (2011/65/EU). Smaller UCS Smaller UCP UCY Specifications Item Performance Characteristics Category Temperature Range –40 to +105°C (160 to 400V) , –25 to +105°C (450V) Rated Voltage Range 160 to 450V Rated Capacitance Range 6.8 to 330µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA) Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 160 0.20 200 0.20 250 0.20 350 0.24 400 0.24 450 0.24 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C Z–40°C / Z+20°C 160 3 6 200 3 6 250 3 6 350 5 6 400 5 6 450 6 -- Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 10000 hours (8000 hours for φD=10 × 16L, 10 × 20L) at 105°C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Type numbering system (Example : 250V 100µF) Radial Lead Type φd Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 U CS 2 E 1 0 1 M HD T P±0.5 φD+0.5MAX. Size code 2 Configuration Capacitance tolerance (±20%) Rated capacitance (100µF) Rated voltage (250V) Pressure relief vent L + 1.5MAX. 15 MIN 4 MIN Series name Type Configuration Pencil - shaped Type Size code φd Sleeve (P.E.T.) 2 Blank, 6 Pb-free leadwire Pb-free PET sleeve 9 Pb-free leadwire Pb-free PET sleeve 10 PD ND 12.5 to 18 HD NY P±0.5 φD±0.5 MAX. φD L+ 2.0 MAX. Pressure relief vent 15MIN 4MIN (mm) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8 • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 246 CAT.8100F ALUMINUM ELECTROLYTIC CAPACITORS UCS Dimensions Cap V 160 200 250 Code 2C 2D 2E 350 2V 6R8 6.8 10 100 15 150 22 220 680 68 820 82 101 100 12.5 × 20 1275 12.5 × 25 1420 16 × 20 1420 650 12.5 × 20 1180 12.5 × 20 500 10× 20 750 10 × 20 320 10 × 20 650 10 × 20 470 47 10 × 16 500 10 × 20 330 33 320 10 × 16 980 12.5 × 20 1300 10 × 20 10 × 20 12.5 × 20 12.5 × 20 16 × 20 400 350 500 800 980 1300 2G 10 × 16 280 10 × 20 350 12.5 × 20 650 16 × 20 16 × 20 900 1080 16 × 25 1400 18 × 20 1375 16 × 20 1380 16 × 20 1380 18 × 25 1530 16 × 20 1420 16 × 25 1530 18 × 25 1575 150 151 16 × 20 1890 16 × 25 1890 18 × 25 1940 220 221 16 × 25 2370 18 × 25 2365 18 × 31.5 3130 330 331 18 × 31.5 3130 18 × 35.5 3220 450 2W 10 × 16 280 10 × 20 280 10 × 20 350 12.5 × 20 450 12.5 × 20 550 12.5 × 25 600 12.5 × 20 760 16 × 20 730 16 × 25 980 18 × 20 980 18 × 25 1200 18 × 31.5 1575 16 × 20 900 16 × 25 1180 18 × 20 1180 18 × 25 1470 18 × 25 1525 Case size φD × L (mm) : Rated ripple current (mArms) at 105°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Pencil-shaped Type V Cap.(µF) Code 200 250 400 2D 2E 2G 450 2W 27 270 .010 × 40.0 580 33 330 .010 × 40.0 720 39 390 .010 × 40.0 800 .010 × 50.0 820 56 560 .010 × 50.0 1040 68 680 82 820 12.5 × 50 1400 100 101 .010 × 40.0 1260 120 121 .010 × 40.0 1360 150 151 .010 × 50.0 1660 180 181 270 271 12.5 × 50 2530 12.5 × 50 .010 × 40.0 1220 .010 × 50.0 1360 12.5 × 50 2070 1340 Case size φ D × L (mm) Rated ripple current (mArms) at 105°C 100kHz : In this case, 9 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.40 0.50 0.80 0.90 1.00 247 CAT.8100F