UCS2G6R8MPD1TD

ALUMINUM ELECTROLYTIC CAPACITORS UCS Miniature Sized, High Ripple Current, High Reliability UCA High ripple current and Long Life product withstanding load life of 8000 to 10000 hours at +105°C. Suited for ballast application. Compliant to the RoHS directive (2011/65/EU). Smaller UCS Smaller UCP UCY Specifications Item Performance Characteristics Category Temperature Range –40 to +105°C (160 to 400V) , –25 to +105°C (450V) Rated Voltage Range 160 to 450V Rated Capacitance Range 6.8 to 330µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA) Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 160 0.20 200 0.20 250 0.20 350 0.24 400 0.24 450 0.24 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C Z–40°C / Z+20°C 160 3 6 400 5 6 350 5 6 250 3 6 200 3 6 450 6 -- Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 10000 hours (8000 hours for φD=10 × 16L, 10 × 20L) at 105°C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Type numbering system (Example : 250V 100µF) Radial Lead Type φd Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 U CS 2 E 1 0 1 M HD T P±0.5 φD+0.5MAX. Size code 2 Configuration Capacitance tolerance (±20%) Rated capacitance (100µF) Pressure relief vent L + 1.5MAX. 15 MIN Rated voltage (250V) 4 MIN Series name Type Pencil - shaped Type Configuration Size code φd Sleeve (P.E.T.) P±0.5 φD±0.5 MAX. φD L+ 2.0 MAX. Pressure relief vent 15MIN 4MIN (mm) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8 • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 250 2 Blank, 6 Pb-free leadwire Pb-free PET sleeve 9 Pb-free leadwire Pb-free PET sleeve 10 PD ND 12.5 to 18 HD NY ALUMINUM ELECTROLYTIC CAPACITORS UCS Dimensions Cap 6.8 V 160 200 250 Code 2C 2D 2E 350 2V 6R8 10 100 15 150 22 220 33 47 470 68 680 82 820 100 101 10 × 20 750 12.5 × 20 1180 12.5 × 20 1275 12.5 × 25 1420 16 × 20 1420 500 10× 20 650 10 × 20 320 10 × 20 500 10 × 20 330 10 × 16 320 10 × 16 650 12.5 × 20 980 12.5 × 20 1300 10 × 20 10 × 20 12.5 × 20 12.5 × 20 16 × 20 350 500 800 980 1300 16 × 20 900 1080 16 × 25 1400 18 × 20 1375 18 × 25 1530 16 × 20 1420 16 × 25 1530 18 × 25 1575 16 × 25 1890 18 × 25 1940 220 221 16 × 25 2370 18 × 25 2365 18 × 31.5 3130 330 331 V 18 × 31.5 160 3130 18 × 35.5 200 3220 6.8 16 × 20 650 1380 1890 2C 350 16 × 20 16 × 20 Code 10 × 20 1380 151 Cap 280 12.5 × 20 2D 250 350 2E 2V 10 × 16 280 320 10 × 16 320 10 × 20 350 10 × 20 350 10 × 20 500 10 × 20 500 10 × 20 500 12.5 × 20 650 Pencil-shaped 33 330 Type10 × 20 650 10× 20 650 12.5 × 20 800 16 × 20 900 15 150 22 220 200 V Cap.(µF) 47 27 Code 470 750 10 × 20 270 250 2D 12.5 × 20 980 12.5 × 202E 980 33 330 39 680 12.5 390 × 20 1180 12.5 × 20 1300 16 × 20 1300 56 82 68 820 560 12.5 680 × 20 1275 16 × 20 1380 16 × 20 1380 82 1420 16 × 20 1420 1260 .010 × 40.0 16 × 25 .010 × 50.0 220 180 221 820 × 25 12.5 101 16 × 20 121 16 × 20 151 16 × 25 181 330 270 331 271 12.5 × 50 3130 18 × 31.5 150 100 120 150 101 151 280 10 × 20 350 12.5 × 20 450 12.5 × 20 550 12.5 × 25 600 12.5 × 20 760 16 × 20 730 16 × 25 980 18 × 20 980 18 × 25 1200 18 × 31.5 1575 16 × 20 900 16 × 25 1180 18 × 20 1180 18 × 25 1470 18 × 25 1525 400 450 : Rated ripple current (mArms) at 105°C 100kHz 2G 2W : In this case, 6 will be put at 12th digit of type numbering system. 10 × 20 280 10 × 16 280 10 × 20 350 12.5 × 20 450 12.5 × 20 550 12.5 × 25 600 12.5 × 20 760 16 × 20 730 16 × 20 900 16 × 25 980 18 × 20 450 980 16 × 20 2G 1080 1180 2W 18 × 25 1180.010 × 40.0 1200 580 16 × 25 18 × 20 68 100 10 × 20 400 280 Case size 10 × 16 100 .010 × 40.0 1420 .010 × 40.0 1890 .010 × 50.0 2370 1360 16 × 25 1890 1660 18 × 25 2365 2W 10 × 16 φD × L (mm) 6R8 10 450 2G 10 × 16 16 × 20 150 Dimensions 400 1220 1530 1360 18 × 25 16 × 25 1400 .010 × 40.0 18 × 20 1375 .010 × 50.0 18 × 25 1530 12.5 × 50 18 × 25 1575 18 ×800 25 .010 × 40.0 18 × 31.5 1470.010 × 50.0 720 1575 820 1040 18 × 25 152512.5 × 50 1340 1400 1940 × 31.5 12.518× 50 2530 3220 18 × 35.5 3130 2070 CaseCase size size L (mm) φ D × φD × L (mm) current (mArms) at 105°C 100kHz : RatedRated rippleripple current (mArms) at 105°C 100kHz thisbecase, will be putofattype 12th digit of type : In this case,: 9Inwill put at6 12th digit numbering system. numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.40 0.50 0.80 0.90 1.00 251