UCX1H471MNS1MS

ALUMINUM  ELECTROLYTIC  CAPACITORS UCX Chip Type, High Reliability Low temperature ESR specification Chip type, high temperature range, for +135°C use. Added ESR specification after the test at -40°C. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UCX High Temperature UCZ Specifications ■ Specifications Item Performance Characteristics Category Temperature Range –40 to +135°C Item Performance Characteristics Rated Voltage Range 10 to 50V Category TemperatureRange Range Rated Capacitance 47 to 3300µF Rated Voltage Range Capacitance Tolerance ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3(µA), whichever is greater. Leakage Current Range Rated Capacitance Capacitance Tolerance Leakage Current 10 0.30 Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) Rated voltage (V) Tangent of loss angle (tan δ) tan Stability at Low Temperature 16 0.23 10 16 0.30 0.23 Rated voltage (V) (MAX.) 25 0.18 25 16 10 Impedance ratio Z–40°C / Z+20°C (MAX.) Rated voltage (V) 35 0.16 0.18 12 10 0.16 6 Impedance ratio 12 8 / Z+20C ZT / Z20 (MAX.) Z–40C The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 135°C. Stability at Low Temperature Measurement frequency : 120Hz, Temperature : 20 C Measurement frequency : 120Hz 35 50 35 25 8 16 Measurement frequency : 120Hz at 20°C 50 0.16 4 25 4 35 Measurement frequency : 120 Hz 4 Within ± 30% of the initial capacitance value Capacitance Change 300% or less than the initial specified value tan δ Capacitance Within of thetoinitial capacitance value than30% or equal the initial specified value Leakage currentChange Less tan δ 300% or less than the initial specified value After storing the capacitors under no load at 135°C for 1000 hours Leakage and thencurrent performing voltage on JIS C 5101-4 Less thantreatment or equal tobased the initial specified value Endurance Endurance Shelf Life 6 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. soldering heat Resistance to soldering heat Marking After storing the capacitors under no load at 135C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause The capacitors shall be kept on the hot plate for 30 seconds, Capacitance Change 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Within ±10% of the initial capacitance value which is maintained at 250°C. The capacitors shall meet the Less than or equal to the initial specified value tan δ characteristic requirements listed at right when they are Capacitance Within of thetoinitial capacitance value than10% or equal the initial specified value Leakage currentChange Less removed from the plate and restored to 20°C. tan δ Less than or equal to the initial specified value Black print on the case top. Leakage current Less than or equal to the initial specified value Marking Chip Type Black print on the case top. Type numbering system (Example : 35V 47µF) 1 9 2 3 4 5 6 2.4 B 6.6 CL 1.0 6.6 E L 10 10 L H 0.8 to 1.1 0.8 to 1.1 H Dimension table in next page. 2.9 3.2 8.3 10.3 10.3 2.2 8.3 H 3.1 10.8 10 0.5 to 0.8 1.1 to 1.5 4.5 H 10 166 Series A 0.2 Positive H C 0.2 0.3 MAX. 0.5 MAX. Voltage Lot No. Capacitance 1.1 to 1.5 Negative Capacitance Trade mark A 0.2 C 0.2 E L 1.0 0.5 MAX. A 0.2 E A 0.2 0.3 MAX. L 1.0 Plastic platform Negative 0.5 MAX. C 0.2 B 0.2 Series Capacitance Lot No. Positive Plastic platform A2 220V CX Lot No. (mm) 10×10 φ6.3 to 10 φ12.5 to 18 0.3 MAX. Series a2 220V CX Trade mark A 0.2 A 0.2 E φ 90 F CX 50V H1015 A 8×10 12 13 14Package code Aid electrode Rated Voltage L 1.0 V 10 Pressure A relief vent Code H 16 C 25 E A 0.2 E A 0.2 C 8.3 10.3Pressure relief vent Capacitance E 3.1 Series 4.5 6.3×10 10 11 Type nichicon 3.2 10.3 C 0.2 9 Plastic platform Voltage( V : 35V ) A 0.2 E A 0.2 2.9 8.3 0.5MAX. A 0.2 E A 0.2 B 0.2 φD×L φ Trade mark Positive Negative 0.3 MAX. Vibration Resistance 8 , Positive L 0.5 12 13 14 Package Code Package code Taping GS Taping MS Size code Capacitance tolerance (20%) Configuration Configuration Rated capacitance (47µF) Configuration Code Capacitance tolerance (±20%) CL(φ10 or less) Configuration Rated voltage (35V) Standard NQ(φ12.5 or more) Rated capacitance (47µF) Code Configuration CS(φ10 or less) Series name Vibration Resistance NS(φ12.5 or more) Standard L Rated voltage (35V) Type Vibration Resistance S Series name Negative H 7 Voltage( V : 35V ) H Plastic platform 10×10 φD 0.5 90 F CX 50V H1015 nichicon 8×10 L 0.5 10 11 Configuration 0.5 MAX. Voltage Lot No. (mm) C 0.2 0.3MAX. B 0.2 φD 0.5 φD 0.5 Capacitance Trade mark Standard B Plastic platform Capacitance Lot No. A Series a2 220V CX A2 220V CX Voltage( V : 35V ) φD×L 0.3MAX. Series B 0.2 φ C 0.2 0.5MAX. Voltage( V : 35V ) Lot No. 1 Positive Plastic platform Trade mark 8 H , φ 7 Negative Capacitance Lotφ6.3 No. × 10 : Vibration resistant type onlyL 1.0 Trade mark 6 B 0.2 H 5 φ D 0.5 φ D 0.5 φ D 0.5 a2 A2 47V 47V CX CX L 1.0 C 0.2 4 A 0.2 A 0.2 0.3 MAX. Series Capacitance Lot No. C 0.2 3 U CX 1 V 4 7 0 M C SizeLcode1 G S Size 0.5MAX. 0.5 MAX. Voltage( V : 35V ) 0.3 MAX. Plastic platform E A 0.2 E A 0.2 Series B 0.2 B 0.2 φ Voltage( V : 35V ) 2 U CX 1 V 4 7 0 M C L 1 GS Positive Plastic platform B 0.2 Radial Lead Type φ φ D 0.5 Resistance to φ D 0.5 Shelf Life 35 V Negative ALUMINUM  ELECTROLYTIC  CAPACITORS UCX Dimensions Cap.(µF) V 10 16 25 35 50 Code 1A 1C 1E 1V 1H 47 470 68 680 100 101 220 221 0.25 4 15 197 8 × 10 0.20 3 12 270 8 × 10 0.20 3 10 × 10 0.15 10 × 10 0.15 ●6.3 × 10 8 × 10 0.20 3 12 270 0.20 3 12 270 10 × 10 0.15 2 10 500 10 × 10 0.15 2 10 500 ● 8 × 10 8 × 10 0.20 3 12 270 12 270 10 × 10 0.15 2 10 500 2 10 500 10 × 10 0.15 2 10 500 2 10 500 330 331 390 391 470 471 560 680 820 821 12.5 × 13.5 0.07 1.0 5.0 1000 102 12.5 × 13.5 0.07 1.0 5.0 1200 122 1500 1800 2200 2700 3300 ●6.3 × 10 0.25 4 15 197 8 × 10 0.20 3 12 270 8 × 10 0.20 3 12 270 ●6.3 × 10 0.25 4 15 197 8 × 10 0.20 3 12 270 10 × 10 0.15 2 10 500 8 × 10 0.25 3.5 15 270 10 × 10 0.2 12 500 12.5 × 13.5 0.09 1.3 6.5 750 2.5 12.5 × 13.5 0.07 1.0 5.0 750 16 × 16.5 0.07 0.70 3.5 1000 561 12.5 × 13.5 0.07 1.0 5.0 750 16 × 16.5 0.07 0.70 3.5 1000 681 12.5 × 13.5 0.07 1.0 5.0 750 18 × 16.5 0.07 0.70 3.5 1200 750 16 × 16.5 0.05 0.50 2.5 1200 18 × 16.5 0.07 0.70 3.5 1200 750 16 × 16.5 0.05 0.50 2.5 1200 16 × 21.5 0.05 0.40 2.0 1600 16 × 16.5 0.05 0.50 2.5 1200 18 × 16.5 0.05 0.50 2.5 1400 18 × 21.5 0.04 0.32 1.6 1900 ●16 × 21.5 0.04 0.32 1.6 1900 152 16 × 16.5 0.05 0.50 2.5 1200 182 16 × 16.5 0.05 0.50 2.5 1200 18 × 21.5 0.035 0.28 1.4 2200 222 18 × 16.5 0.05 0.50 2.5 1400 18 ×21.5 0.035 0.28 1.4 2200 272 16 × 21.5 0.04 0.32 1.6 1900 332 18 × 21.5 0.035 0.28 1.4 2200 18 × 16.5 0.05 0.50 2.5 1400 Initial Initial 20℃ -40℃ After endurance test 1000hours -40℃ Rated ripple ESR（100kHz） MAX. ESR（Ω）at 20℃ / -40℃ 100kHz, Rated ripple current(mArms) at 135℃ 100kHz ●In this case, 6 will be put at 12th digit of type numbering system. ● Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Coefficient 0.35 0.50 0.64 0.83 1.00 Taping specifications are given in page 23. Recommended land size, soldering by refrow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 167