UCX1V470MCS6GS

ALUMINUM  ELECTROLYTIC  CAPACITORS UCX Chip Type, High Reliability Low temperature ESR specification Chip type, high temperature range, for +135°C use. Added ESR specification after the test at -40°C. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UCX High Temperature UCZ Specifications ■Item Specifications Performance Characteristics –40 to +135°C 10 to 50V 47 to 3300µF ± 20% at 120Hz, 20°C Category Temperature Range Item Rated Voltage Range Performance Characteristics Category Temperature Range Rated Capacitance Range Rated VoltageTolerance Range Capacitance After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3(µA), whichever is greater. Leakage Current Range Rated Capacitance Measurement frequency : 120Hz at 20°C Capacitance Tolerance Rated voltage (V) 10 16 25 35 50 Tangent Current of loss angle (tan δ) 0.30 0.23 0.18 0.16 0.16 tan δ (max.) Leakage For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.frequency ( φ12.5 to: φ120Hz, 18) Temperature : 20 C Measurement Rated voltage (V) 10 16 25 35 Tangent of loss angle (tan δ) Measurement frequency : 120Hz 0.30(V) 0.23 10 0.18 0.16 tan (MAX.) Rated voltage 16 25 35 50 Stability at Low Temperature Impedance ratio Z(–40°C) / Z(+20°C) Rated voltage (V) (max.) 12 10 816 6 25 4 Impedance ratio 12 8 6 / Z+20C ZTThe / Z20 (MAX.) Z–40C specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 135°C. Stability at Low Temperature 4 Measurement frequency : 120 Hz 35 4 Within ± 30% of the initial capacitance value Capacitance Change 300% or less than the initial specified value tan δ Capacitance Change Within of thetoinitial capacitance value Less than30% or equal the initial specified value Leakage current tan δ 300% or less than the initial specified value After storing the capacitors under no load at 135°C for 1000 hoursLeakage and then performing voltage treatment based on JIS C 5101-4 Less than or equal to the initial specified value current Endurance Endurance Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. After storing the capacitors under no load at 135C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause The capacitors shall be kept on the hot plate for 30 seconds, Capacitance Change 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Within ±10% of the initial capacitance value which is maintained at 250°C. The capacitors shall meet the Less than or equal to the initial specified value tan δ characteristic requirements listed at right when they are Capacitance Within of thetoinitial capacitance value than10% or equal the initial specified value Leakage currentChange Less removed from the plate and restored to 20°C. tan δ Less than or equal to the initial specified value Black print on the case top. Leakage current Less than or equal to the initial specified value ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Black print on the case top. Shelf Life Resistance to soldering heat Resistance to soldering heat Marking Marking Chip Type Type numbering system (Example : 35V 47µF) 5 6 7 8 9 10 11 Size code Configuration Configuration Configuration Rated capacitance (47µF) (±20%) Code Configuration Capacitance tolerance Configuration CL(φ10 or less) RatedRated voltage (35V) capacitance (47µF) Configuration NJ(φ12.5 orCode more) Standard NQ(φ12.5 or more) ※ Seriesvoltage name (35V) Standard L Rated CS(φ10 or less) Vibration Resistance VibrationNS(φ12.5 Resistance or more) S Type name Series 0.3 max. (mm) Vibration Resistance φD×L 10×10 A 2.9 3.2 B 8.3 10.3 Pressure C 8.3 10.3 relief vent Capacitance Series E 3.1 4.5 2.9 3.2 10.3 6.6 10.3 Negative 2.2 3.1 4.5 10.8 10 A 2.4 B CL 1.0 6.6 E L 10 10 L H 0.8 to 1.1 0.8 to 1.1 H 8×10 0.5 to 0.8 1.1 to 1.5 10×10 Lot No. φ D 0.5 C 0.2 L 1.0 H Negative A 0.2 φ D 0.5 a2 220V A2 CX 220V CX 0.3 MAX. Capacitance Capacitance Positive L 1.0 Plastic platform Voltage Lot No. Trade mark (mm) 8.3 H 8.3 6.3×10 Lot No. Series Capacitance Series HC 0.3 max. φ D 0.5 CH 0.2 Plastic platform 390 µF CX 50V H1015 0.5MAX. A 0.2 E A 0.2 0.5 max. Plastic platform Positive Negative A 0.2 E A 0.2 390 µF CX 50V H1015 nichicon 8×10 L 0.5 φD 0.5 Voltage Lot No. Trade mark Standard Negative Trade mark C 0.2 0.3 max. Series nichicon Capacitance H φ Trade mark φ Voltage( V : 35V ) A 0.2 A 0.2 φD 0.5 a2 220V CX L 0.5 C 0.2 E 0.3MAX. Capacitance Lot No. φD×L B 0.2 Series Lot No. Plastic platform ※ NQ is scheduled to be discontinued. Type Positive Plastic platform Voltage( V : 35V ) Positive B 0.2 A2 220V CX Voltage( V : 35V ) Trade mark C 0.2 0.3max. Series B 0.2 φ φD 0.5 φ Trade mark 0.5max. Voltage( V : 35V ) , E Positive 0.5 MAX. 0.5 max. H Plastic platform A 0.2 E A 0.2 A 0.2 L 1.0 , Taping code Codecode Package GS Size MS code Size φ6.3 to 10 φ12.5 to 18 Capacitance tolerance (20%) Negative resistant type only Capacitance Lot φ6.3 No. × 10 : Vibration 12 13 14 0.5 max. H 4 0.2 Aid electrode A 0.2 E A 0.2 L 1.0 C 0.2 E Capacitance Lot No. B 0.2 B 0.2 0.3 MAX. Series φ D 0.5 φ D 0.5 a2 A2 47V 47V CX CX Voltage( V : 35V ) 3 B 0.2 C 0.2 Plastic platform 2 B 0.2 0.3 max. Series 1 U C 1X 21 3V 44 57 60 7M 8C 9L 101 11G 12S 13 14 U CX 1 V 4 7 0 M C L 1 GS B 0.2 φ Plastic platform 0.5max. 0.5 MAX. A 0.2 E A 0.2 Voltage( V : 35V ) Positive A 0.2 A 0.2 φ Radial Lead Type Rated Voltage L 1.0 10 V Pressure relief vent A Code H 16 C 25 E 35 Negative V 10 1.1 to 1.5 ● Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Please contact us for the dimensions for NQ. Dimension table in next page. Coefficient 0.35 0.50 0.64 0.83 1.00 CAT.8100L ALUMINUM  ELECTROLYTIC  CAPACITORS UCX ■ Dimensions Leakage Current （µA） ESR（Ω）max. （20℃/－40℃/100kHz） Rated Ripple （mArms） after Initial Initial endurance test（135℃/100kHz） 1000hours 20℃ －40℃ －40℃ Rated Voltage （V） （code） Rated Capacitance （µF） 220 8× 10 0.30 22 0.20 3.00 12 270 UCX1A221M□□1GS 10 （1A） 330 8× 10 0.30 33 0.20 3.00 12 270 UCX1A331M□□6GS 330 10× 10 0.30 33 0.15 2.00 10 500 UCX1A331M□□1GS 470 10× 10 0.30 47 0.15 2.00 10 500 UCX1A471M□□1GS 100 6.3× 10 0.23 16 0.25 4.00 15 197 UCX1C101MCS6GS 16 （1C） 25 （1E） （ at 20℃ after 2 minutes ） Part Number 100 8× 10 0.23 16 0.20 3.00 12 270 UCX1C101M□□1GS 8× 10 0.23 35.2 0.20 3.00 12 270 UCX1C221M□□1GS 330 10× 10 0.23 52.8 0.15 2.00 10 500 UCX1C331M□□1GS 470 10× 10 0.23 75.2 0.15 2.00 10 500 UCX1C471M□□1GS 100 8× 10 0.18 25 0.20 3.00 12 270 UCX1E101M□□1GS 220 10× 10 0.18 55 0.15 2.00 10 500 UCX1E221M□□1GS 330 10× 10 0.18 82.5 0.15 2.00 10 500 UCX1E331M□□1GS 820 12.5× 13.5 0.18 205 0.070 1.00 5.0 750 UCX1E821M□□1MS 1000 12.5× 13.5 0.18 250 0.070 1.00 5.0 750 UCX1E102M□□1MS 1200 16× 16.5 0.18 300 0.050 0.50 2.5 1200 UCX1E122M□□1MS 1500 16× 16.5 0.18 375 0.050 0.50 2.5 1200 UCX1E152M□□1MS UCX1E182M□□1MS 1800 16× 16.5 0.18 450 0.050 0.50 2.5 1200 2200 18× 16.5 0.20 550 0.050 0.50 2.5 1400 UCX1E222M□□1MS 2700 16× 21.5 0.20 675 0.040 0.32 1.6 1900 UCX1E272M□□1MS 825 1.4 2200 18× 21.5 0.22 0.035 0.28 47 6.3× 10 0.16 16.45 0.25 4.00 15 197 UCX1V470MCS6GS 47 8× 10 0.16 16.45 0.20 3.00 12 270 UCX1V470M□□1GS UCX1E332M□□1MS UCX1V680M□□1GS 68 8× 10 0.16 23.8 0.20 3.00 12 270 100 6.3× 10 0.16 35 0.25 4.00 15 197 UCX1V101MCS6GS 100 8× 10 0.16 35 0.20 3.00 12 270 UCX1V101M□□1GS 10 220 10× 10 0.16 77 0.15 2.00 470 12.5× 13.5 0.16 164.5 0.070 1.00 5.0 500 UCX1V221M□□1GS 750 UCX1V471M□□1MS 560 12.5× 13.5 0.16 196 0.070 1.00 5.0 750 UCX1V561M□□1MS 680 12.5× 13.5 0.16 238 0.070 1.00 5.0 750 UCX1V681M□□1MS 820 16× 16.5 0.16 287 0.050 0.50 2.5 1200 UCX1V821M□□1MS 1000 16×16.5 0.16 350 0.050 0.50 2.5 1200 UCX1V102M□□1MS 1200 18× 16.5 0.16 420 0.050 0.50 2.5 1400 UCX1V122M□□1MS 1500 16× 21.5 0.16 525 0.040 0.32 1.6 1900 UCX1V152M□□6MS 1500 18 × 16.5 0.16 525 0.050 0.50 2.5 1400 UCX1V152M□□1MS 1800 18 × 21.5 0.16 630 0.035 0.28 1.4 2200 UCX1V182M□□1MS 2200 18 × 21.5 0.18 770 0.035 0.28 1.4 2200 UCX1V222M□□1MS 8× 10 0.16 23.5 0.25 3.50 15 270 UCX1H470M□□1GS 100 10 × 10 0.16 50 0.20 2.50 12 500 UCX1H101M□□1GS 390 12.5× 13.5 0.16 195 0.090 1.30 6.5 750 UCX1H391M□□1MS 470 16 × 16.5 0.16 235 0.070 0.70 3.5 1000 UCX1H471M□□1MS 560 16 × 16.5 0.16 280 0.070 0.70 3.5 1000 UCX1H561M□□1MS 680 18 × 16.5 0.16 340 0.070 0.70 3.5 1200 UCX1H681M□□1MS 820 18 × 16.5 0.16 410 0.070 0.70 3.5 1200 UCX1H821M□□1MS 1000 16 × 21.5 0.16 500 0.050 0.40 2.0 1600 UCX1H102M□□1MS 1200 18 × 21.5 0.16 600 0.040 0.32 1.6 1900 UCX1H122M□□1MS 47 50 （1H） tan δ 220 3300 35 （1V） Case Size φD×L（mm） □□ : Enter the appropriate configuration code. For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L