UCY2V220MPD

ALUMINUM ELECTROLYTIC CAPACITORS UCY Miniature Sized, High Ripple Current, High Reliability UCS High ripple current and Long Life product withstanding load life of 10000 to 12000 hours at +105°C. Suited for ballast application. Compliant to the RoHS directive (2011/65/EU). Smaller ULD UCY Long Life Specifications Item Performance Characteristics Category Temperature Range –40 to +105°C (160 to 400V), –25 to +105°C (420 to 500V) Rated Voltage Range 160 to 500V Rated Capacitance Range 6.8 to 680µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA) Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 160 0.20 200 0.20 250 0.20 350 0.24 400 0.24 420 0.24 450 0.24 500 0.24 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z–25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z–40°C / Z+20°C 160 3 6 200 3 6 250 3 6 500 6 -- 450 6 -- 420 6 -- 400 5 6 350 5 6 Endurance The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 12000 hours (10000 hours for 20L or less, 500V) at 105˚C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 250V 100µF) Radial Lead Type 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U CY 2 E 1 0 1 M HD T Size code Capacitance tolerance (±20%) P±0.5 φD+0.5MAX. Configuration Rated capacitance (100µF) Rated voltage (250V) Series name Pressure relief vent L + 1.5 MAX. 15 MIN Type 4 MIN Configuration φD (mm) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8 • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 252 Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 HD ALUMINUM ELECTROLYTIC CAPACITORS UCY Dimensions Cap V 160 200 250 350 400 420 450 Code 2C 2D 2E 2V 2G W6 2W 160 140 150 175 10 × 16 10 × 20 10 × 20 105 135 150 10 × 16 10 × 20 10 × 20 105 135 150 10 × 20 180 10 × 20 180 10 × 25 185 10 × 25 185 10 × 20 215 10 × 25 235 10 × 31.5 215 10 × 31.5 12.5 × 20 215 255 10 × 25 10 × 20 12.5 × 20 10 × 31.5 10 × 25 255 215 325 305 255 10 × 31.5 275 12.5 × 20 285 12.5 × 25 300 360 12.5 × 25 340 12.5 × 25 340 6R8 100 120 10 × 16 15 150 18 180 220 10 × 16 225 10 × 16 225 27 270 10 × 16 235 10 × 20 255 33 330 10 × 20 305 39 390 10 × 16 10 × 16 260 295 380 12.5 × 25 385 12.5 × 31.5 400 12.5 × 31.5 400 16 × 31.5 350 385 12.5 × 31.5 430 16 × 35.5 380 12.5 × 25 510 440 540 505 500 480 16 × 40 16 × 20 12.5 × 35.5 16 × 25 18 × 20 385 460 440 525 350 455 16 × 20 12.5 × 35.5 18 × 20 12.5 × 40 18 × 25 12.5 × 25 450 465 385 520 510 590 630 585 600 720 640 735 16 × 20 345 16 × 20 12.5 × 31.5 12.5 × 25 16 × 20 12.5 × 31.5 18 × 20 12.5 × 35.5 16 × 25 18 × 20 12.5 × 40 16 × 25 18 × 25 16 × 25 500 18 × 31.5 440 12.5 × 40 570 18 × 35.5 480 18 × 40 525 16 × 31.5 10 × 20 325 10 × 25 10 × 20 360 12.5 × 20 490 10 × 31.5 10 × 25 12.5 × 20 405 345 490 380 10 × 25 415 12.5 × 20 515 10 × 25 455 10 × 31.5 485 12.5 × 25 615 68 680 12.5 × 20 590 12.5 × 20 650 16 × 20 650 534 455 12.5 × 25 12.5 × 20 645 645 12.5 × 31.5 12.5 × 25 715 615 12.5 × 20 640 16 × 20 690 16 × 20 690 12.5 × 20 645 12.5 × 25 16 × 20 16 × 20 695 710 775 12.5 × 31.5 810 16 × 20 12.5 × 35.5 16 × 25 12.5 × 35.5 12.5 × 40 18 × 20 18 × 25 715 785 845 785 890 815 970 12.5 × 40 990 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 680 561 681 12.5 × 25 760 240 280 280 280 310 310 450 10 × 20 121 16 × 20 12.5 × 35.5 16 × 25 18 × 20 12.5 × 40 16 × 25 16 × 20 560 120 220 240 12.5 × 20 56 101 220 16 × 20 12.5 × 31.5 400 375 100 12.5 × 25 305 10 × 20 820 160 10 × 20 470 82 12.5 × 20 12.5 × 20 12.5 × 20 47 10 × 31.5 10 × 25 2H 10 × 16 10 × 16 10 × 20 6.8 10 12 22 500 12.5 × 31.5 12.5 × 25 16 × 20 16 × 20 12.5 × 31.5 12.5 × 35.5 12.5 × 40 12.5 × 35.5 16 × 25 18 × 20 18 × 25 12.5 × 40 16 × 31.5 18 × 25 16 × 40 16 × 35.5 18 × 31.5 905 760 945 1000 905 1050 1200 1050 1185 1105 1235 1300 1510 1445 1730 1510 1695 12.5 × 35.5 16 × 25 18 × 20 12.5 × 40 16 × 25 18 × 20 16 × 31.5 12.5 × 40 965 945 910 1090 1035 910 1230 1090 18 × 25 1185 18 × 31.5 1160 16 × 35.5 18 × 31.5 16 × 40 18 × 31.5 18 × 40 1400 1410 1595 1560 1780 18 × 35.5 16 × 40 18 × 46 18 × 40 18 × 35.5 16 × 40 18 × 40 18 × 46 1920 1730 2130 2300 18 × 40 18 × 46 12.5 × 31.5 590 16 × 20 565 12.5 × 35.5 16 × 25 18 × 20 16 × 31.5 12.5 × 40 16 × 25 18 × 25 16 × 31.5 18 × 25 16 × 35.5 695 700 690 740 785 700 765 825 790 925 18 × 31.5 940 18 × 35.5 1080 16 × 40 1000 18 × 40 1205 18 × 46 1300 16 × 31.5 585 18 × 25 560 16 × 35.5 660 16 × 31.5 645 18 × 25 615 805 16 × 35.5 725 16 × 40 750 18 × 25 765 18 × 31.5 730 18 × 31.5 730 16 × 35.5 18 × 31.5 18 × 31.5 16 × 40 850 875 940 950 16 × 40 18 × 35.5 18 × 40 825 835 930 18 × 35.5 835 18 × 40 930 18 × 35.5 960 18 × 46 945 18 × 46 945 18 × 40 1030 18 × 46 1110 16 × 31.5 1110 18 × 25 1050 16 × 40 1295 16 × 35.5 1220 1450 1350 1600 1530 18 × 35.5 1690 1850 1900 Case size φD × L (mm) : Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.80 1.00 1.60 1.80 2.00 : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 3 will be put at 12th digit of type numbering system. : In this case, 9 will be put at 12th digit of type numbering system. 253