UEP1H470MED.PD

ALUMINUM ELECTROLYTIC CAPACITORS EP Bi-Polarized, Wide Temperature Range series 1 ~ 2 ranks smaller than ET series. Adapted to the RoHS directive (2002/95/EC). ET Smaller EP Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Performance Characteristics – 55 ~ +105°C 6.3 ~ 100V 0.47 ~ 6800µF ± 20% at 120Hz, 20°C After 5 minutes' application of rated voltage, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 6.3 0.24 10 0.24 16 0.20 6.3 4 10 10 3 8 25 0.20 16 2 6 35 0.16 25 2 4 50 0.14 35 2 3 50 2 3 63 0.12 63 2 3 100 0.10 100 2 3 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Endurance After 1000 hours' application of rated voltage at 105°C, with the polarity inverted every 250 hours, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±25% of initial value (6.3~16V) Within ±20% of initial value (25~100V) 150% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 47µF) fd Sleeve (P.E.T.) D+0.5 MAX UEP 1 A 4 7 0 MDD P ± 0.5 1 2 3 4 5 6 7 8 9 10 11 Configuration Capacitance tolerance (±20%) Rated Capacitance (47mF) Rated voltage (10V) Series name Type f (f 6.3up) Pressure reliefvent L+ MAX 15MIN fD 4MIN (L < 20) 1.5 (L 20) 2.0 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 f d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 (mm) • Please refer to page 21 about the end seal configulation. Configuration Pb-free leadwire fD Pb-free PET sleeve 5 DD 6.3 ED 8 á 10 PD 12.5 ~ 18 HD 25 1E 35 1V 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 31.5 63 1J 7 10 15 18 22 37 63 77 105 190 340 460 590 Dimensions Cap. (µF) V Code 6.3 0J 10 1A 16 1C 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 R47 010 2R2 3R3 5 × 11 4R7 5 × 11 5 × 11 5 × 11 100 27 27 5 × 11 220 46 6.3 × 11 37 40 6.3 × 11 5 × 11 5 × 11 5 × 11 8 × 11.5 330 56 45 45 49 6.3 × 11 5 × 11 5 × 11 8 × 11.5 470 67 54 6.3 × 11 54 67 6.3 × 11 5 × 11 8 × 11.5 110 8 × 11.5 110 10 × 16 101 6.3 × 11 90 90 6.3 × 11 8 × 11.5 150 221 215 12.5 × 20 8 × 11.5 150 10 × 12.5 195 10 × 16 8 × 11.5 185 10 × 16 331 320 12.5 × 20 240 10 × 16 265 12.5 × 20 10 × 12.5 260 10 × 16 471 380 12.5 × 25 290 10 × 20 345 12.5 × 20 10 × 20 102 670 16 × 31.5 510 12.5 × 25 460 12.5 × 20 605 16 × 25 222 12.5 × 25 910 16 × 31.5 1070 18 × 35.5 1140 820 16 × 25 16 × 25 332 1110 16 × 31.5 1200 18 × 35.5 1400 16 × 31.5 1430 18 × 35.5 1520 472 18 × 35.5 1830 682 21 30 51 72 86 160 290 350 465 805 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 18 × 35.5 20 24 40 68 98 130 225 405 535 680 100 2A 5 × 11 5 × 11 6.3 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 16 12.5 × 20 12.5 × 20 16 × 25 18 × 35.5 8 12 20 25 30 50 97 140 170 300 510 Case size Rated φ D × L (mm) ripple Rated Ripple (mArms) at 105°C 120Hz Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V