UEP2A010MDD

ALUMINUM ELECTROLYTIC CAPACITORS UEP Bi-Polarized, Wide Temperature Range Bi-polarized series for operations over wide temperature range of 　 – 55°C to +105°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UEP Wide Temperature UVP Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics –55 to +105°C 6.3 to 100V 1 to 6800µF ± 20% at 120Hz, 20°C After 5 minutes' application of rated voltage at 20°C, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.24 10 0.24 16 0.20 25 0.20 35 0.16 50 0.14 63 0.12 100 0.10 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio (MAX.) Z– 40°C / Z+20°C 6.3 4 10 10 3 8 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C with the polarity inverted every 250 hours. Endurance 16 2 6 25 2 4 35 2 3 50 2 3 Capacitance change tan δ Leakage current 63 2 3 100 2 3 Within ±25% of the initial capacitance value (6.3to16V) Within ±20% of the initial capacitance value (25to100V) 150% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Radial Lead Type Type numbering system (Example : 10V 47µF) µ Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Frequency coefficient of rated ripple current Frequency 50 Hz 120Hz 300 Hz 1 kHz 1 to 47 0.75 1.00 1.35 1.57 2.00 0100 to 4700 0.80 1.00 1.23 1.34 1.50 1000 to 6800 0.85 1.00 1.10 1.13 1.15 Cap.(µF) 10 kHz or more Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UEP ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） ） Part Number 5× 11 0.24 6.237 46 UEP0J330MDD 0.24 8.883 54 UEP0J470MDD 100 6.3× 11 8× 11.5 0.24 18.9 90 UEP0J101MED 0.24 41.58 150 UEP0J221MPD 330 8× 11.5 0.24 62.37 185 UEP0J331MPD 470 10× 12.5 0.24 88.83 260 UEP0J471MPD 1000 10× 20 0.24 189 460 UEP0J102MPD 2200 12.5× 25 0.26 415.8 820 UEP0J222MHD 3300 16× 25 0.28 623.7 1110 UEP0J332MHD 4700 16× 31.5 0.30 888.3 1430 UEP0J472MHD 6800 18× 35.5 0.34 1285.2 1830 UEP0J682MHD 5× 11 0.24 6.6 42 UEP1A220MDD 33 5× 11 0.24 9.9 45 UEP1A330MDD 47 5× 11 0.24 14.1 54 UEP1A470MDD 100 6.3× 11 8× 11.5 0.24 30 90 UEP1A101MED 0.24 66 150 UEP1A221MPD 330 10× 16 0.24 99 240 UEP1A331MPD 470 10× 16 0.24 141 290 UEP1A471MPD 1000 12.5× 20 0.24 300 510 UEP1A102MHD 2200 16× 25 0.26 660 910 UEP1A222MHD 3300 16× 31.5 0.28 990 1200 UEP1A332MHD 4700 18× 35.5 0.30 1410 1520 UEP1A472MHD 10 5× 11 0.20 4.8 30 UEP1C100MDD 22 5× 11 0.20 10.56 40 UEP1C220MDD 33 5× 11 0.20 15.84 49 UEP1C330MDD 47 6.3× 11 100 25 （1E） （ Rated Ripple （mArms） （105℃/120Hz） 5× 11 220 16 （1C） Leakage Current （µA） at 20℃ after 5 minutes 33 22 10 （1A） tan δ 47 220 6.3 （0J） Case Size φD×L（mm） 8× 11.5 0.20 22.56 0.20 48 67 UEP1C470MED 110 UEP1C101MPD 220 10× 12.5 0.20 105.6 195 UEP1C221MPD 330 10× 16 0.20 158.4 265 UEP1C331MPD 470 10× 20 0.20 225.6 345 UEP1C471MPD 1000 12.5× 25 0.20 480 605 UEP1C102MHD 2200 16× 31.5 0.22 1056 1070 UEP1C222MHD 3300 18× 35.5 0.24 1584 1400 UEP1C332MHD 10 5× 11 0.20 7.5 34 UEP1E100MDD 22 6.3× 11 0.20 16.5 55 UEP1E220MED 33 6.3× 11 0.20 24.75 56 UEP1E330MED 47 6.3× 11 0.20 35.25 67 UEP1E470MED 100 220 8× 11.5 10× 16 0.20 75 110 UEP1E101MPD 0.20 165 215 UEP1E221MPD 330 12.5× 20 0.20 247.5 320 UEP1E331MHD 470 12.5× 20 0.20 352.5 380 UEP1E471MHD 1000 16×25 0.20 750 670 UEP1E102MHD 2200 18× 35.5 0.22 1650 1140 UEP1E222MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UEP ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 4.7 5× 11 0.16 5× 11 0.16 22 6.3× 11 47 100 ） 4.935 10.5 Part Number 25 UEP1V4R7MDD 30 UEP1V100MDD 0.16 23.1 51 UEP1V220MED 0.16 34.65 72 UEP1V330MPD 0.16 0.16 49.35 105 86 UEP1V470MPD 160 UEP1V101MPD 12.5× 20 0.16 231 290 UEP1V221MHD 12.5× 20 0.16 346.5 350 UEP1V331MHD 470 12.5× 25 16×31.5 0.16 0.16 493.5 1050 465 UEP1V471MHD 805 UEP1V102MHD 1 5×11 0.14 3 12 UEP1H010MDD 2.2 5× 11 0.14 3.3 18 UEP1H2R2MDD 3.3 5× 11 0.14 4.95 22 UEP1H3R3MDD 4.7 5× 11 0.14 7.05 22 UEP1H4R7MDD 22 6.3×11 8× 11.5 0.14 15 37 UEP1H100MED 0.14 33 63 UEP1H220MPD 33 8× 11.5 0.14 49.5 77 UEP1H330MPD 47 10 ×12.5 0.14 70.5 105 UEP1H470MPD 100 10 ×20 0.14 150 190 UEP1H101MPD 220 12.5 ×25 0.14 330 340 UEP1H221MHD 330 16 ×25 0.14 495 460 UEP1H331MHD 470 16× 31.5 0.14 705 590 UEP1H471MHD 3.3 5× 11 0.12 6.237 20 UEP1J3R3MDD 4.7 6.3×11 0.12 8.883 31 UEP1J4R7MED 6.3×11 0.12 40 UEP1J100MED 10 18.9 22 8×11.5 0.12 41.58 68 UEP1J220MPD 33 10× 12.5 0.12 62.37 98 UEP1J330MPD 47 10× 16 0.12 100 12.5× 20 0.12 88.83 189 130 UEP1J470MPD 225 UEP1J101MHD 220 16× 25 0.12 415.8 405 UEP1J221MHD 330 16× 31.5 0.12 623.7 535 UEP1J331MHD 470 18×35.5 0.12 888.3 680 UEP1J471MHD 5×11 0.10 3 15 UEP2A010MDD 1 100 （2A） 8×11.5 10× 16 （ Rated Ripple （mArms） （105℃/120Hz） 220 10 63 （1J） 8×11.5 Leakage Current （µA） at 20℃ after 5 minutes 330 1000 50 （1H） tan δ 10 33 35 （1V） Case Size φD×L（mm） 2.2 6.3× 11 0.10 6.6 20 UEP2A2R2MED 3.3 6.3× 11 0.10 9.9 25 UEP2A3R3MED 4.7 6.3× 11 10 8×11.5 0.10 14.1 30 UEP2A4R7MED 0.10 30 50 UEP2A100MPD 22 10 ×16 0.10 66 97 UEP2A220MPD 33 12.5× 20 0.10 99 140 UEP2A330MHD 47 12.5× 20 0.10 141 170 UEP2A470MHD 100 16 ×25 0.10 300 300 UEP2A101MHD 220 18 ×35.5 0.10 660 510 UEP2A221MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K