UEP2A4R7MED

ALUMINUM  ELECTROLYTIC  CAPACITORS UEP Bi-Polarized, Wide Temperature Range Bi-polarized series for operations over wide temperature range of 　 – 55°C to +105°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UEP Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. Wide Temperature UVP Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current ※ Performance Characteristics –55 to +105°C 6.3 to 100V 1 to 6800µF ± 20% at 120Hz, 20°C After 5 minutes' application of rated voltage at 20°C, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ (max.) Tangent of loss angle (tan δ) 6.3 0.24 10 0.24 16 0.20 25 0.20 35 0.16 50 0.14 63 0.12 100 0.10 Measurement frequency : 120Hz Rated voltage (V) Impedance ratio Z(– 25°C) / Z(+20°C) Stability at Low Temperature (max.) Z(– 40°C) / Z(+20°C) 6.3 4 10 10 3 8 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C with the polarity inverted every 250 hours. Endurance 16 2 6 25 2 4 35 2 3 50 2 3 Capacitance change tan δ Leakage current 63 2 3 100 2 3 Within ±25% of the initial capacitance value (6.3to16V) Within ±20% of the initial capacitance value (25to100V) 150% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 10V 47µF) P±0.5 φD+0.5max. Sleeve (PET) µ L± 15min. 4min.  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Frequency coefficient of rated ripple current Frequency 120Hz 300 Hz 1 to 47 0.75 1.00 1.35 1.57 2.00 0100 to 4700 0.80 1.00 1.23 1.34 1.50 1000 to 6800 0.85 1.00 1.10 1.13 1.15 Cap.(µF) 50 Hz 1 kHz 10 kHz or more Dimension table in next page. CAT.8100L ALUMINUM  ELECTROLYTIC  CAPACITORS UEP ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） ） Part Number 5× 11 0.24 6.237 46 ※UEP0J330MDD 0.24 8.883 54 ※UEP0J470MDD 100 6.3× 11 8× 11.5 0.24 18.9 90 ※UEP0J101MED 0.24 41.58 150 　UEP0J221MPD 330 8× 11.5 0.24 62.37 185 　UEP0J331MPD 470 10× 12.5 0.24 88.83 260 　UEP0J471MPD 1000 10× 20 0.24 189 460 　UEP0J102MPD 2200 12.5× 25 0.26 415.8 820 　UEP0J222MHD 3300 16× 25 0.28 623.7 1110 　UEP0J332MHD 4700 16× 30.5 0.30 888.3 1430 　UEP0J472MHD 6800 18× 35.5 0.34 1285.2 1830 　UEP0J682MHD 5× 11 0.24 6.6 42 ※UEP1A220MDD 33 5× 11 0.24 9.9 45 ※UEP1A330MDD 47 5× 11 0.24 14.1 54 ※UEP1A470MDD 100 6.3× 11 8× 11.5 0.24 30 90 ※UEP1A101MED 0.24 66 150 　UEP1A221MPD 330 10× 16 0.24 99 240 　UEP1A331MPD 470 10× 16 0.24 141 290 　UEP1A471MPD 1000 12.5× 20 0.24 300 510 　UEP1A102MHD 2200 16× 25 0.26 660 910 　UEP1A222MHD 3300 16× 30.5 0.28 990 1200 　UEP1A332MHD 4700 18× 35.5 0.30 1410 1520 　UEP1A472MHD 10 5× 11 0.20 4.8 30 ※UEP1C100MDD 22 5× 11 0.20 10.56 40 ※UEP1C220MDD 33 5×11 0.20 15.84 49 ※UEP1C330MDD 47 6.3×11 100 25 （1E） （ Rated Ripple （mArms） （105℃/120Hz） 5× 11 220 16 （1C） Leakage Current （µA） at 20℃ after 5 minutes 33 22 10 （1A） tan δ 47 220 6.3 （0J） Case Size φD×L（mm） 8× 11.5 0.20 22.56 0.20 48 67 ※UEP1C470MED 110 　UEP1C101MPD 220 10× 12.5 0.20 105.6 195 　UEP1C221MPD 330 10×16 0.20 158.4 265 　UEP1C331MPD 470 10× 20 0.20 225.6 345 　UEP1C471MPD 1000 12.5× 25 0.20 480 605 　UEP1C102MHD 2200 16× 30.5 0.22 1056 1070 　UEP1C222MHD 3300 18× 35.5 0.24 1584 1400 　UEP1C332MHD 10 5× 11 0.20 7.5 34 ※UEP1E100MDD 22 6.3× 11 0.20 16.5 55 ※UEP1E220MED 33 6.3× 11 0.20 24.75 56 ※UEP1E330MED 47 6.3× 11 0.20 35.25 67 ※UEP1E470MED 100 220 8× 11.5 10× 16 0.20 75 110 　UEP1E101MPD 0.20 165 215 　UEP1E221MPD 330 12.5× 20 0.20 247.5 320 　UEP1E331MHD 470 12.5× 20 0.20 352.5 380 　UEP1E471MHD 1000 16× 25 0.20 750 670 　UEP1E102MHD 2200 18× 35.5 0.22 1650 1140 　UEP1E222MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM  ELECTROLYTIC  CAPACITORS UEP ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 4.7 5× 11 0.16 5× 11 0.16 22 6.3× 11 47 100 ） 4.935 10.5 Part Number 25 ※UEP1V4R7MDD 30 ※UEP1V100MDD 0.16 23.1 51 ※UEP1V220MED 0.16 34.65 72 　UEP1V330MPD 0.16 0.16 49.35 105 86 　UEP1V470MPD 160 　UEP1V101MPD 12.5× 20 0.16 231 290 　UEP1V221MHD 12.5× 20 0.16 346.5 350 　UEP1V331MHD 470 12.5 ×25 16 ×30.5 0.16 0.16 493.5 1050 465 　UEP1V471MHD 805 　UEP1V102MHD 1 5×11 0.14 3 12 ※UEP1H010MDD 2.2 5× 11 0.14 3.3 18 ※UEP1H2R2MDD 3.3 5× 11 0.14 4.95 22 ※UEP1H3R3MDD 4.7 5× 11 0.14 7.05 22 ※UEP1H4R7MDD 22 6.3× 11 8× 11.5 0.14 15 37 ※UEP1H100MED 0.14 33 63 　UEP1H220MPD 33 8× 11.5 0.14 49.5 77 　UEP1H330MPD 47 10× 12.5 0.14 70.5 105 　UEP1H470MPD 100 10× 20 0.14 150 190 　UEP1H101MPD 220 12.5 ×25 0.14 330 340 　UEP1H221MHD 330 16 ×25 0.14 495 460 　UEP1H331MHD 470 16 ×30.5 0.14 705 590 　UEP1H471MHD 3.3 5×11 0.12 6.237 20 ※UEP1J3R3MDD 4.7 6.3×11 0.12 8.883 31 ※UEP1J4R7MED 6.3× 11 0.12 40 ※UEP1J100MED 10 18.9 22 8× 11.5 0.12 41.58 68 　UEP1J220MPD 33 10× 12.5 0.12 62.37 98 　UEP1J330MPD 47 10× 16 0.12 100 12.5× 20 0.12 88.83 189 130 　UEP1J470MPD 225 　UEP1J101MHD 220 16 ×25 0.12 415.8 405 　UEP1J221MHD 330 16 ×30.5 0.12 623.7 535 　UEP1J331MHD 470 18 ×35.5 0.12 888.3 680 　UEP1J471MHD 5× 11 0.10 3 15 ※UEP2A010MDD 1 100 （2A） 8×11.5 10× 16 （ Rated Ripple （mArms） （105℃/120Hz） 220 10 63 （1J） 8×11.5 Leakage Current （µA） at 20℃ after 5 minutes 330 1000 50 （1H） tan δ 10 33 35 （1V） Case Size φD×L（mm） 2.2 6.3×11 0.10 6.6 20 ※UEP2A2R2MED 3.3 6.3×11 0.10 9.9 25 ※UEP2A3R3MED 4.7 6.3×11 10 8× 11.5 0.10 14.1 30 ※UEP2A4R7MED 0.10 30 50 　UEP2A100MPD 22 10× 16 0.10 66 97 　UEP2A220MPD 33 12.5×20 0.10 99 140 　UEP2A330MHD 47 12.5×20 0.10 141 170 　UEP2A470MHD 100 16× 25 0.10 300 300 　UEP2A101MHD 220 18× 35.5 0.10 660 510 　UEP2A221MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L