UES1C221MPM1TD

ALUMINUM ELECTROLYTIC CAPACITORS UES Bi-Polarized, For Audio Equipment Bi-polarized “nichicon MUSE” acoustic series. Suited for audio signal circuits. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. UES Specifications Item Bi-polarized UFW Performance Characteristics Category Temperature Range – 40 to +85°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current ※ After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (max.) 6.3 0.24 10 0.20 16 0.16 25 0.16 35 0.14 50 0.12 Measurement frequency : 120Hz Stability at Low Temperature Impedance ratio (max.) Z(–25°C) / Z(+20°C) Z(–40°C) / Z(+20°C) 50 2 4 35 2 4 25 2 4 16 2 4 10 3 6 6.3 4 8 Rated voltage (V) Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C with the polarity inverted every 250 hours. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on clear green sleeve. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 10V 47µF) Sleeve (PET) φd 1 2 3 4 5 6 7 8 9 10 11 Configuration P±0.5 φD+ 0.5max. UE S 1 A 4 7 0 MEM Capacitance tolerance ( ±20%) (mm) Pressure relief vent (φ6.3up) φD L± 15min. 4min. 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 φd 0.6 0.6 0.6 0.6 0.8 0.8 Rated capacitance (47µF) Rated voltage (10V) Series name φD Code 5 DM 6.3 EM 8 · 10 PM 12.5 · 16 HM Type (φD < 8) 1.0 (φD 8) 1.5  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Dimension table in next page. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UES Dimensions Rated Voltage （V） （code） 6.3 （0J） 10 （1A） 16 （1C） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 33 5× 11 0.24 47 6.3× 11 0.24 6.237 ※UES0J330MDM 8.883 ※UES0J470MEM ） 8× 11.5 0.24 18.9 　UES0J101MPM 220 10× 12.5 0.24 41.58 　UES0J221MPM 330 10× 16 0.24 62.37 　UES0J331MPM 470 10× 20 0.24 88.83 　UES0J471MPM 1000 12.5× 25 0.24 22 5× 11 0.20 6.6 ※UES1A220MDM 33 6.3× 11 0.20 9.9 ※UES1A330MEM 47 189 　UES0J102MHM 6.3× 11 0.20 14.1 ※UES1A470MEM 100 10× 12.5 0.20 30 　UES1A101MPM 220 10× 16 0.20 66 　UES1A221MPM 330 10× 20 0.20 99 　UES1A331MPM 470 12.5× 20 0.20 141 　UES1A471MHM 1000 16×25 0.20 300 　UES1A102MHM 10 5× 11 0.16 4.8 ※UES1C100MDM 22 6.3×11 0.16 10.56 ※UES1C220MEM 33 6.3× 11 0.16 15.84 ※UES1C330MEM 47 8× 11.5 0.16 22.56 　UES1C470MPM 100 10× 12.5 0.16 48 　UES1C101MPM 220 10× 20 0.16 105.6 　UES1C221MPM 330 12.5× 20 0.16 158.4 　UES1C331MHM 470 12.5× 25 0.16 225.6 　UES1C471MHM 1000 16×25 0.16 480 5× 11 0.16 10 5× 11 22 6.3× 11 　UES1C102MHM 3.525 ※UES1E4R7MDM 0.16 7.5 ※UES1E100MDM 0.16 16.5 ※UES1E220MEM 33 8× 11.5 0.16 24.75 　UES1E330MPM 47 10× 12.5 0.16 35.25 　UES1E470MPM 100 10×16 0.16 75 　UES1E101MPM 220 12.5×25 0.16 165 　UES1E221MHM 330 12.5×25 0.16 247.5 　UES1E331MHM 470 1000 4.7 10 35 （1V） Part Number （ 100 4.7 25 （1E） Leakage Current （µA） at 20℃ after 1 minute 16×25 0.16 352.5 　UES1E471MHM 16× 30.5 0.16 750 　UES1E102MHM 5×11 0.14 6.3×11 0.14 10.5 ※UES1V100MEM 4.935 ※UES1V4R7MDM 22 8×11.5 0.14 23.1 　UES1V220MPM 33 10× 12.5 0.14 34.65 　UES1V330MPM 49.35 　UES1V470MPM 10× 12.5 0.14 100 47 10× 20 0.14 105 　UES1V101MPM 220 12.5× 25 0.14 231 　UES1V221MHM 330 16× 25 0.14 346.5 　UES1V331MHM 470 16× 25 0.14 493.5 　UES1V471MHM For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UES Dimensions Rated Voltage （V） （code） 50 （1H） Rated Capacitance （µF） Leakage Current （µA） at 20℃ after 1 minute Part Number 0.12 3 ※UES1H010MDM 5×11 0.12 3.3 ※UES1H2R2MDM 5×11 0.12 4.95 ※UES1H3R3MDM 6.3×11 0.12 7.05 ※UES1H4R7MEM Case Size φD×L（mm） tan δ 1 5× 11 2.2 3.3 4.7 （ ） 10 8×11.5 0.12 15 　UES1H100MPM 22 10× 12.5 0.12 33 　UES1H220MPM 33 10×16 0.12 49.5 　UES1H330MPM 47 10 ×20 0.12 100 12.5×25 0.12 150 70.5 　UES1H101MHM 　UES1H470MPM 220 16×25 0.12 330 　UES1H221MHM 330 16×30.5 0.12 495 　UES1H331MHM For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L