ALUMINUM ELECTROLYTIC CAPACITORS
ES
Bi-Polarized, For Audio Equipment
series
Bi-polarized “nichicon MUSE” acoustic series. Suited for audio signal circuits. Adapted to the RoHS directive (2002/95/EC).
ES
Bi-polarized
FW
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Performance Characteristics
– 40 ~ +85°C 6.3 ~ 50V 0.47 ~ 1000µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 3 (µA), whichever is greater.
Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.)
6.3 0.24
10 0.20 6.3 4 8
16 0.16 10 3 6 16 2 4
25 0.16 25 2 4
35 0.14 35 2 4
50 0.12 50 2 4
Measurement frequency : 120Hz
Stability at Low Temperature
Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C
Endurance
After 1000 hours' application of rated voltage at 85°C with the polarity inverted every 250 hours, capacitors meet the characteristics requirement listed at right.
Capacitance change tan δ Leakage current
Within ±20% of initial value 150% or less of initial specified value Initial specified value or less
Shelf Life Marking
After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with black color letter on clear green sleeve.
Radial Lead Type
Sleeve (P.E.T.) D+0.5 MAX.
B
Type numbering system (Example : 10V 47µF)
d
UES 1 A 4 7 0 MEM
(mm)
1 2 3 4 5 6 7 8 9 10 11
Pressure relief vent (B6.3up)
B
L+ MAX.
15MIN
4MIN
D 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 B d 0.6 0.6 0.6 0.6 0.8 0.8 (BD < 10) 1.0 (BD 10) 1.5
Configuration B D Code Capacitance tolerance (±20%) 5 DM Rated Capacitance (47µF) 6.3 EM Rated voltage (10V) 8 á 10 PM 12.5 á 16 HM Series name Type
• Please refer to page 21 about the end seal configulation.
B
P ± 0.5
Dimensions
V Cap.(µF) Code
φ D × L (mm) 6.3 0J 10 1A 16 1C 25 1E 35 1V 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 25 16 × 31.5
0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000
R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102
5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25
5 × 11 6.3 × 11 6.3 × 11 10 × 12.5 10 × 16 10 × 20 12.5 × 20 16 × 25
5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 16 × 25
5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 25 12.5 × 25 16 × 25 16 × 31.5
5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 25
Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity.
CAT.8100V
