UES1E4R7MDM

ALUMINUM ELECTROLYTIC CAPACITORS UES Bi-Polarized, For Audio Equipment Bi-polarized “nichicon MUSE” acoustic series. Suited for audio signal circuits. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UES Bi-polarized UFW Specifications Item Performance Characteristics Category Temperature Range – 40 to +85°C Rated Voltage Range 16 to 50V Rated Capacitance Range 10 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current ※ After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV (µA). Tangent of loss angle (tan δ) Stability at Low Temperature Rated voltage (V) tan δ (max.) 16 0.16 25 0.16 Rated voltage (V) Impedance ratio (max.) Z(–25°C) / Z(+20°C) Z(–40°C) / Z(+20°C) 16 2 4 35 0.14 Measurement frequency : 120Hz at 20°C 50 0.12 50 2 4 35 2 4 25 2 4 Measurement frequency : 120Hz Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C with the polarity inverted every 250 hours. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on clear green sleeve. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 16V 47µF) Sleeve (PET) φd 1 2 3 4 5 6 7 8 9 10 11 Configuration P±0.5 φD+ 0.5max. UE S 1 C 4 7 0 MPM Capacitance tolerance (±20%) (mm) Pressure relief vent φD L ±1.5 15min. 4min. 8 10 12.5 16 P 3.5 5.0 5.0 7.5 φd 0.6 0.6 0.8 0.8 φD Code 8 · 10 PM Rated capacitance (47µF) 12.5 · 16 HM Rated voltage (16V) Series name Type  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Dimension table in next page. CAT.8100N ALUMINUM ELECTROLYTIC CAPACITORS UES Dimensions Rated Voltage （V） （code） 16 （1C） 35 （1V） 50 （1H） Part Number 22.56 UES1C470MPM Case Size φD×L（mm） tan δ 47 8× 11.5 0.16 100 10× 12.5 0.16 48 UES1C101MPM 220 10× 20 0.16 105.6 UES1C221MPM 330 12.5× 20 0.16 158.4 UES1C331MHM 470 12.5× 25 0.16 225.6 UES1C471MHM 1000 16× 25 0.16 480 （ ） UES1C102MHM 33 8× 11.5 0.16 24.75 UES1E330MPM 47 10× 12.5 0.16 35.25 UES1E470MPM 10× 16 0.16 75 UES1E101MPM 100 25 （1E） Leakage Current （µA） at 20℃ after 1 minute Rated Capacitance （µF） 220 12.5× 25 0.16 165 UES1E221MHM 330 12.5× 25 0.16 247.5 UES1E331MHM 470 16× 25 0.16 352.5 UES1E471MHM 750 1000 16× 30.5 0.16 22 8× 11.5 0.14 23.1 UES1V220MPM UES1E102MHM 33 10× 12.5 0.14 34.65 UES1V330MPM 47 10× 12.5 0.14 49.35 UES1V470MPM 100 10× 20 0.14 105 UES1V101MPM 220 12.5× 25 0.14 231 UES1V221MHM 330 16× 25 0.14 346.5 UES1V331MHM 470 16× 25 0.14 493.5 UES1V471MHM 10 8× 11.5 0.12 15 UES1H100MPM 22 10× 12.5 0.12 33 UES1H220MPM 33 10× 16 0.12 49.5 UES1H330MPM 70.5 UES1H470MPM 47 10× 20 0.12 100 12.5× 25 0.12 150 UES1H101MHM 220 16× 25 0.12 330 UES1H221MHM 330 16× 30.5 0.12 495 UES1H331MHM For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100N