UET1C471MED

ALUMINUM ELECTROLYTIC CAPACITORS ET Bi-Polarized, Wide Temperature Range series Bi-polarized series for operations over wide temperature range of – 55 ~ +105°C. Adapted to the RoHS directive (2002/95/EC). ET High Temperature VP Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Performance Characteristics – 55 ~ +105°C 6.3 ~ 100V 0.47 ~ 1000µF ± 20% at 120Hz, 20°C After 5 minutes' application of rated voltage, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 6.3 0.24 10 0.20 16 0.16 6.3 4 8 10 3 6 25 0.16 16 2 4 35 0.14 25 2 4 50 0.12 35 2 3 50 2 3 63 0.10 63 2 3 100 0.09 100 2 3 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Endurance After 1000 hours' application of rated voltage at 105°C with the polarity inverted every 250 hours, capacitors meet the characteristic requirement listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 47µF) f Sleeve (P.E.T.) D+0.5MAX d UET 1 A 4 7 0 MED P ± 0.5 1 2 3 4 5 6 7 8 9 10 11 Configuration Capacitance tolerance (±20%) Rated Capacitance (47mF) Rated voltage (10V) Series name Type Configuration Pb-free leadwire fD Pb-free PET sleeve 5 DD 6.3 ED 8 á 10 PD 12.5 á 16 HD f (f6.3up) Pressure relief vent L+ MAX 15MIN fD 4MIN (L < 20) 1.5 (L 20) 2.0 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 f d 0.5 0.5 0.6 0.6 0.6 0.8 (mm) • Please refer to page 21 about the end seal configulation. Dimensions Cap. (µF) V Code 6.3 0J 10 1A 16 1C 25 1E 35 1V 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 R47 010 2R2 3R3 4R7 100 220 5 × 11 330 470 6.3 × 11 8 × 11.5 101 221 10 × 12.5 331 10 × 16 471 10 × 20 102 12.5 × 25 46 61 104 168 229 300 550 5 × 11 6.3 × 11 6.3 × 11 10 × 12.5 10 × 16 10 × 20 12.5 × 20 16 × 25 5 × 11 42 6.3 × 11 57 6.3 × 11 8 × 11.5 67 125 10 × 12.5 204 10 × 20 275 12.5 × 20 371 12.5 × 25 668 16 × 25 30 51 63 89 139 279 346 460 746 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 25 12.5 × 25 16 × 25 16 × 31.5 5 × 11 23 34 6.3 × 11 8 × 11.5 55 79 10 × 12.5 100 10 × 12.5 164 10 × 20 336 12.5 × 25 414 16 × 25 543 16 × 25 871 25 40 68 89 111 196 364 493 586 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 25 16 × 31.5 63 1J 8 12 18 22 6.3 × 11 29 6.3 × 11 51 8 × 11.5 82 10 × 16 107 10 × 20 146 10 × 20 264 12.5 × 25 443 16 × 31.5 593 26 31 53 96 129 157 275 486 100 2A 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 16 × 25 10 15 22 32 39 64 114 164 200 304 Case size Rated φ D × L (mm) ripple Rated Ripple (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Cap.(µF) Frequency 0000 ~ 4700 0100 ~ 4700 1000 50 Hz 0.75 0.80 0.85 120 Hz 1.00 1.00 1.00 300 Hz 1.35 1.23 1.10 1 kHz 1.57 1.34 1.13 10 kHz ~ 2.00 1.50 1.15 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V