UFW1C222MHD1TO

ALUMINUM ELECTROLYTIC CAPACITORS UFW Standard, For Audio Equipment Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. UKW High Sound Quality UFW Specifications Item Performance Characteristics –40 to +85°C 6.3 to 100V 33 to 22000µF ± 20% at 120Hz, 20°C Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03 CV (µA) . After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV (µA). Leakage Current ※ 6.3 0.28 Rated voltage (V) tan δ (max.) Tangent of loss angle (tan δ) 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 Measurement frequency : 120Hz at 20°C 100 0.08 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz Rated voltage (V) Impedance ratio Z(–25°C) / Z(+20°C) Stability at Low Temperature (max.) Z(–40°C) / Z(+20°C) 6.3 5 12 10 4 10 16 3 8 25 2 5 35 2 4 50 2 3 63 2 3 100 2 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on Gold sleeve. Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 16V 330µF) Sleeve (PET) Sleeve (PET) φd φd 1 2 3 4 5 6 7 8 9 10 11 P±0.5 P±0.5 φD+0.5max. φD+0.5max. U FW 1 C 3 3 1 M PD Configuration Capacitance tolerance (±20%) Rated capacitance (330µF) Pressure relief vent Pressure relief vent L±1.5 L ±1.5 8 8 3.5 3.5 0.6 0.6 φD φD P P φd φd 15min. 15min. 10 12.5 16 10 12.5 16 5.0 5.0 7.5 5.0 0.6 5.0 0.8 7.5 0.6 0.6 0.6 0.8 4min. 4min. Rated voltage (16V) Series name Type (mm) (mm) 18 Configuration 18 7.5 7.5 0.8 0.8 φD Pb-free leadwire Pb-free PET sleeve 8 ·10 12.5 to 18 PD HD  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 33 to 47 0.75 1.00 1.35 1.57 2.00 100 to 470 0.80 1.00 1.23 1.34 1.50 1000 to 22000 0.85 1.00 1.10 1.13 1.15 Cap.(µF) Dimension table in next page. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS UFW Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 1000 10 （1A） 25 （1E） 35 （1V） 8× 11.5 Leakage Current （µA） at 20℃ after at 20℃ after 1 minute 2 minutes Rated Ripple （mArms） （85℃/120Hz） Part Number 0.28 189 63 530 ※UFW0J102MPD 0.30 415.8 138.6 980 ※UFW0J222MPD 3300 10× 20 0.32 623.7 207.9 1170 ※UFW0J332MPD 4700 12.5× 20 0.34 888.3 296.1 1350 ※UFW0J472MHD 6800 12.5× 25 0.38 1285.2 428.4 1600 ※UFW0J682MHD 10000 16× 25 0.46 1890 630 2000 ※UFW0J103MHD 15000 16× 35.5 0.56 2835 945 2550 ※UFW0J153MHD 22000 18×40 0.70 4158 1386 3200 ※UFW0J223MHD 1000 10×12.5 0.24 300 100 630 ※UFW1A102MPD 2200 10× 20 0.26 660 220 1050 ※UFW1A222MPD 3300 12.5× 20 0.28 990 330 1420 ※UFW1A332MHD 4700 12.5× 25 0.30 1410 470 1800 ※UFW1A472MHD 6800 16× 25 0.34 2040 680 2150 ※UFW1A682MHD 10000 16× 35.5 0.42 3000 1000 2500 ※UFW1A103MHD 15000 18× 35.5 0.52 4500 1500 330 8× 11.5 0.20 158.4 8× 11.5 470 16 （1C） tan δ 10× 20 2200 6.3 （0J） Case Size φD×L（mm） 2720 ※UFW1A153MHD 52.8 360 　UFW1C331MPD 75.2 0.20 225.6 420 　UFW1C471MPD 1000 10× 16 0.20 480 160 770 　UFW1C102MPD 2200 12.5× 20 0.22 1056 352 1250 　UFW1C222MHD 3300 12.5× 25 0.24 1584 528 1700 　UFW1C332MHD 4700 16× 25 0.26 2256 752 2100 　UFW1C472MHD 6800 16× 35.5 0.30 3264 1088 2500 　UFW1C682MHD 10000 18× 35.5 0.38 4800 1600 2640 　UFW1C103MHD 220 8× 11.5 0.16 165 55 320 　UFW1E221MPD 330 10× 12.5 0.16 247.5 82.5 420 　UFW1E331MPD 470 10× 12.5 0.16 352.5 117.5 530 　UFW1E471MPD 1000 10× 20 0.16 750 250 950 　UFW1E102MPD 2200 12.5× 25 0.18 1650 550 1550 　UFW1E222MHD 3300 16× 25 0.20 2475 825 1950 　UFW1E332MHD 4700 16× 30.5 0.22 3525 1175 2360 　UFW1E472MHD 6800 18× 35.5 0.26 5100 1700 2590 　UFW1E682MHD 220 10× 12.5 0.14 231 77 370 　UFW1V221MPD 330 10× 12.5 0.14 346.5 115.5 470 　UFW1V331MPD 493.5 164.5 470 10× 16 0.14 1000 12.5× 20 0.14 1050 630 　UFW1V471MPD 350 1100 　UFW1V102MHD 2200 16× 25 0.16 3300 16× 35.5 0.18 2310 770 1800 　UFW1V222MHD 3465 1155 2220 　UFW1V332MHD 4700 18×35.5 0.20 4935 1645 2490 　UFW1V472MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS UFW Dimensions Rated Voltage （V） （code） 50 （1H） 63 （1J） Rated Capacitance （µF） tan δ 100 8× 11.5 0.12 150 220 10×12.5 0.12 330 330 10× 16 0.12 495 470 12.5× 20 0.12 705 1000 12.5 ×25 Rated Ripple （mArms） （85℃/120Hz） Part Number 50 250 　UFW1H101MPD 110 410 　UFW1H221MPD 165 570 　UFW1H331MPD 235 760 　UFW1H471MHD at 20℃ after at 20℃ after 1 minute 2 minutes 0.12 1500 500 1300 　UFW1H102MHD 2200 16× 35.5 0.14 3300 1100 2090 　UFW1H222MHD 3300 18× 35.5 0.16 4950 1650 2360 　UFW1H332MHD 100 10×12.5 0.10 189 63 300 　UFW1J101MPD 220 10 ×16 0.10 415.8 138.6 470 　UFW1J221MPD 330 10 ×20 0.10 623.7 207.9 650 　UFW1J331MPD 888.3 296.1 470 12.5×20 0.10 880 　UFW1J471MHD 1000 16× 25 0.10 1890 630 1300 　UFW1J102MHD 2200 18× 35.5 0.12 4158 1386 2200 　UFW1J222MHD 33 8× 11.5 0.08 99 33 160 　UFW2A330MPD 47 10 ×12.5 0.08 141 47 210 　UFW2A470MPD 10×20 0.08 300 100 350 　UFW2A101MPD 100 100 （2A） Leakage Current （µA） Case Size φD×L（mm） 220 12.5×25 0.08 660 220 600 　UFW2A221MHD 330 12.5× 25 0.08 990 330 750 　UFW2A331MHD 470 16× 25 0.08 1410 470 1000 　UFW2A471MHD 1000 18 ×40 0.08 3000 1000 1370 　UFW2A102MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100M