UFW1V471MPD1TD

ALUMINUM  ELECTROLYTIC  CAPACITORS UFW Standard, For Audio Equipment Compliant to the RoHS directive (2011/65/EU). UKW High Sound Quality UFG High Grade UFW Specifications Item Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance –40 to +85°C 6.3 to 100V 2.2 to 33000µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03 CV or 4 (µA) , whichever is greater. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. Leakage Current Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 Measurement frequency : 120Hz at 20°C 100 0.08 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C 6.3 5 12 10 4 10 16 3 8 25 2 5 35 2 4 50 2 3 63 2 3 100 2 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on Gold sleeve. Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Radial Lead Type Type numbering system (Example : 10V 1000µF) Sleeve (P.E.T.) Sleeve (P.E.T.) φd φd 1 2 3 4 5 6 7 8 9 10 11 P ±P0.5±0.5 + MAX. φDMAX. φD+ U FW 1 A 1 0 2 M PD Pressure relief vent Pressure (φ6.3up) relief vent (φ6.3up) Configuration Capacitance tolerance (±20%) Rated capacitance (1000µF) L+ L+ φD φD P P φd φd 15MIN 15MIN MAX. MAX. 5 5 2.0 2.0 0.5 0.5 0.5 0.5 6.3 6.3 2.5 2.5 0.5 0.5 0.5 0.5 8 8 3.5 3.5 0.6 0.6 0.5 0.5 10 10 5.0 5.0 0.6 0.6 0.5 0.5 Rated voltage (10V) 4MIN 4MIN 12.5 12.5 5.0 5.0 0.6 0.6 0.5 0.5 16 16 7.5 7.5 0.8 0.8 0.5 0.5 Series name 18 18 7.5 7.5 0.8 0.8 0.5 0.5 20 20 10 10 1.0 1.0 0.5 0.5 22 22 10 10 1.0 1.0 1.0 1.0 Type (mm) (mm) 25 Configuration 25 12.5 12.5 1.0 1.0 1.0 1.0 (φD < 20) 1.5 (φD < 20) 20) 2.0 1.5 (φD (φD 20) 2.0 φD Pb-free leadwire Pb-free PET sleeve 5 DD 6.3 8 ·10 12.5 to 18 ED PD HD 20 to 25 RD • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 277 CAT.8100H ALUMINUM ELECTROLYTIC CAPACITORS UFW Dimensions Cap.(µF) V 6.3 10 16 25 35 50 63 Code 0J 1A 1C 1E 1V 1H 1J 2 .2 2R2 5 × 11 3 .3 3R3 5 × 11 4 .7 4R7 23 5 × 11 30 35 5 × 11 40 5 × 11 45 5 × 11 40 5 × 11 65 5 × 11 70 6.3 × 11 75 5 × 11 95 5 × 11 100 6.3 × 11 120 105 5 × 11 120 6.3 × 11 140 120 6.3 × 11 150 6.3 × 11 165 10 × 12.5 210 10 100 22 220 33 330 47 470 100 101 220 221 330 331 6.3 × 11 265 6.3 × 11 270 8 × 11.5 360 10 × 12.5 420 10 × 12.5 470 10 × 16 570 10 × 20 470 471 6.3 × 11 310 6.3 × 11 330 8 × 11.5 420 10 × 12.5 530 10 × 16 1000 102 2200 222 10 × 20 980 10 × 20 3300 332 10 × 20 1170 12.5 × 20 4700 472 12.5 × 20 6800 682 10000 103 15000 153 16 × 35.5 2550 18 × 35.5 2720 20 × 40 22000 223 18 × 40 3200 20 × 40 3700 22 × 50 33000 333 22 × 50 3900 22 × 50 4500 25 × 50 4800 5 × 11 115 5 × 11 5 × 11 6.3 × 11 145 5 × 11 230 6.3 × 11 5 × 11 155 6.3 × 11 250 185 6.3 × 11 2A 100 200 8 × 11.5 160 8 × 11.5 250 10 × 12.5 300 10 × 20 350 470 12.5 × 25 600 650 12.5 × 25 750 8 × 11.5 320 10 × 12.5 370 10 × 12.5 410 10 × 16 630 12.5 × 20 760 12.5 × 20 880 16 × 25 1000 770 10 × 20 950 12.5 × 20 1100 12.5 × 25 1300 16 × 25 1300 18 × 40 1370 1050 12.5 × 20 1250 12.5 × 25 1550 16 × 25 1800 16 × 35.5 2090 18 × 35.5 2200 22 × 50 2400 1420 12.5 × 25 1700 16 × 25 1950 16 × 35.5 2220 18 × 35.5 2360 20 × 40 2700 25 × 50 2900 1350 12.5 × 25 1800 16 × 25 2100 16 × 31.5 2360 18 × 35.5 2490 20 × 40 2900 22 × 50 3400 12.5 × 25 1600 16 × 25 2150 16 × 35.5 2500 18 × 35.5 2590 20 × 40 3500 16 × 25 2000 16 × 35.5 2500 18 × 35.5 2640 20 × 40 8 × 11.5 530 10 × 12.5 630 10 × 16 3000 22 × 50 3500 25 × 50 3000 22 × 50 3700 25 × 50 4000 3400 22 × 50 3800 25 × 50 4300 4200 25 × 50 4500 Case size φD × L (mm) Rated ripple Rated ripple current (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 2.2 to 47 0.75 1.00 1.35 1.57 2.00 100 to 470 0.80 1.00 1.23 1.34 1.50 1000 to 33000 0.85 1.00 1.10 1.13 1.15 Cap.(µF) 278 CAT.8100H