ALUMINUM ELECTROLYTIC CAPACITORS
HC
Low Impedance
series
A pproved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C
Lower impedance than HD series. Adapted to the RoHS directive (2002/95/EC).
HC
Low Impedance
HD
Specifications
ltem
Category Temperature Range – 40 ~ +105˚C Rated Voltage Range
6.3 ~ 35V
Performance Characteristics
Rated Capacitance Range 4.7 ~ 1000µF Capacitance Tolerance Leakage Current tan δ
± 20% at 120Hz, 20˚C After 2 minutes' application of rated voltage, leakage current is less than 0.01CV or 3 (µA), whichever is greater.
Rated voltage (V) tan δ (MAX.) Rated voltage (V)
6.3 0.15 6.3 2
10 0.13 10 2
16 0.12 16 2
25 0.10 25 2
35 0.10 35 2
120Hz 20˚C
Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z–40˚C / Z+20˚C
120Hz
< After an application of D.C. bias voltage plus the rated ripple current for 2000 hours (φD = 6.3 : 1000 hours ) at 105˚C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed below.
Endurance
Capacitance change tan δ Leakage current
Within ± 20% of initial value 200% or less of initial specified value lnitial specified value or less
Marking
Printed with white color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.) D+0.5 MAX.
fd
Type numbering system (Example : 10V 470µF)
UHC 1 A 4 7 1 M PD
Configuration Capacitance tolerance (± 20%) Rated Capacitance (470mF) Rated voltage (10V) Series name Type Configuration Pb-free leadwire fD Pb-free PET sleeve 4 5 DD 6.3 (7L) 6.3 (11L) ED 8 á 10 PD
P ± 0.5
1 2 3 4 5 6 7 8 9 10 11
Pressure relief vent 15MIN L+ MAX. (f6.3up) (No pressure relief vent for 7mmL products)
f
4MIN
(L = 7) 1.0 (L 11) 1.5
f
( ) : Applied to 7mmL products
D45 P 1.5 2.0 f d 0.45 0.45
6.3 8 10 2.5 3.5 5.0 0.5 (0.45) 0.6 0.6
(mm)
• Please refer to page 21 about the end seal configulation.
Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity.
Dimension table in next page.
CAT.8100V
ALUMINUM ELECTROLYTIC CAPACITORS
HC
series
Standard ratings
V (Code)
6.3 (0J)
Case size φD × L (mm)
(mArms) 20˚C / 100kHz 105˚C / 100kHz
10 (1A)
Rated ripple
Case size φD × L (mm)
(mArms) 20˚C / 100kHz 105˚C / 100kHz
16 (1C)
Rated ripple
Case size φD × L (mm)
(mArms) 20˚C / 100kHz 105˚C / 100kHz
Item Cap.(µF) Code
Impedance (Ω ) MAX.
Impedance (Ω ) MAX.
Impedance (Ω ) MAX.
Rated ripple
22 33 47 100 220 330 470 1000
220 330 470 101 221 331 471 102 4×7 5×7 6.3 × 7 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 0.48 0.26 0.15 0.077 0.043 0.043 0.024 230 350 480 640 910 910 1650
4×7 5×7 5×7 6.3 × 7 8 × 11.5 8 × 11.5 10 × 12.5
0.49 0.26 0.26 0.15 0.044 0.043 0.030
230 350 350 480 910 910 1230
5×7 5×7 6.3 × 7 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16
0.26 0.26 0.15 0.078 0.044 0.030 0.025
350 350 480 640 910 1230 1650
V (Code)
25 (1E)
Case size φD × L (mm)
(mArms) 20˚C / 100kHz 105˚C / 100kHz
35 (1V)
Rated ripple
Case size φD × L (mm)
(mArms) 20˚C / 100kHz 105˚C / 100kHz
Item Cap. (µF) Code
Impedance (Ω ) MAX.
Impedance (Ω ) MAX.
Rated ripple
4.7 10 22 33 47 100 220 330
4R7 100 220 330 470 101 221 331 4×7 5×7 6.3 × 7 6.3 × 7 6.3 × 11 10 × 12.5 10 × 16 0.52 0.27 0.16 0.15 0.078 0.031 0.026 230 350 480 480 640 1230 1650
4×7 5×7 6.3 × 7 6.3 × 7 6.3 × 11 8 × 11.5 10 × 16
0.64 0.33 0.17 0.16 0.089 0.048 0.026
230 350 480 480 640 910 1650
Frequency coefficient of rated ripple current
Cap. (µF) Frequency
120Hz
0.40 0.47 0.55
1kHz 0.68 0.75 0.85
10kHz 0.90 0.95 0.98
100kHz 1.00 1.00 1.00
4.7 ~ 33 47 ~ 330 470 ~ 1000
CAT.8100V
很抱歉,暂时无法提供与“UHC0J330MPD”相匹配的价格&库存,您可以联系我们找货
免费人工找货