UHD1E561MHD

ALUMINUM ELECTROLYTIC CAPACITORS HD High Ripple Low Impedance series A pproved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C Lower impedance at high frequency range. Smaller case size and high ripple current. Adapted to the RoHS directive (2002/95/EC). Low Impedance HC HD Smaller Specifications ltem Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current HV Performance Characteristics – 40 ~ +105˚C 6.3 ~ 50V 22 ~ 6800µF ± 20% at 120Hz, 20˚C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Rated voltage (V) 6.3 0.22 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 120Hz 20˚C tan δ tan δ (MAX.) For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Stability at Low Temperature 6.3 2 3 10 2 3 16 2 3 25 2 3 35 2 3 50 2 3 120Hz Impedance ratio ZT / Z20 (MAX.) Z–25˚C / Z+20˚C Z–40˚C / Z+20˚C < After an application of D.C. bias voltage plus the rated ripple current for 5000 hours ( φD = 6.3 : 2000 hours, φD=8 : 3000 hours, φD=10 : 4000 hours) at 105˚C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed below. Endurance Capacitance change tan δ Leakage current Marking Within ± 25% of initial value 200% or less of initial specified value lnitial specified value or less Printed with white color letter on black sleeve. Radial Lead Type Sleeve (P.E.T.) D+0.5 MAX. fd Type numbering system (Example : 10V 3300µF) UHD 1 A 3 3 2 M HD P ± 0.5 1 2 3 4 5 6 7 8 9 10 11 12 Size code Configuration Capacitance tolerance (± 20%) Rated Capacitance (3300mF) Rated voltage (10V) Series name Type (f6.3up) Pressure relief vent f L+ MAX. 15MIN 4MIN (L < 20) 1.5 (L 20) 2.0 (mm) fD 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 fd 0.5 0.5 0.6 0.6 0.6 0.8 In case L > 25 for the f12.5 dia. unit, lead dia. f d = 0.8mm. Configuration Pb-free leadwire fD Pb-free PET sleeve 5 DD 6.3 ED 8 á 10 PD 12.5 á16 HD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS HD series Standard ratings V (Code) 6.3 (0J) Case size φD × L (mm) 10 (1A) Case size φD × L (mm) Impedance (Ω) MAX. 20˚C / 100kHz Item Cap.(µF) 100 150 220 330 470 560 680 820 1000 1200 1500 2200 3300 3900 4700 5600 6800 Code Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz Impedance (Ω) MAX. 20˚C / 100kHz Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz 101 151 221 331 471 561 681 821 102 122 152 222 332 392 472 562 682 8 × 15 10 × 12.5 8 × 20 10 × 16 10 × 20 10 × 25 12.5 × 20 12.5 × 25 12.5 × 31.5 12.5 × 35.5 16 × 20 16 × 25 8 × 11.5 6.3 × 11 5 × 11 5 × 11 0.30 0.13 0.072 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.018 0.015 0.016 1.0 0.41 0.22 0.17 0.16 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.045 0.039 0.043 250 405 760 995 1030 1250 1430 1820 2150 2360 2770 3290 3140 3400 3460 0.30 0.13 0.072 1.0 0.41 0.22 250 6.3 × 11 405 8 × 11.5 760 8 × 15 10 × 12.5 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.015 0.018 0.016 0.17 0.16 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.039 0.045 0.043 995 1030 1250 1430 1820 2150 2360 2770 3290 3400 3140 3460 8 × 20 10 × 16 10 × 20 10 × 25 12.5 × 20 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 V (Code) 16 (1C) Case size φD × L (mm) 25 (1E) Case size φD × L (mm) Impedance (Ω) MAX. 20˚C / 100kHz Item Cap. (µF) 47 56 100 120 220 330 470 680 820 1000 1200 1500 1800 2200 2700 3300 3900 Code Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz Impedance (Ω) MAX. 20˚C / 100kHz Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz 470 560 101 121 221 331 471 681 821 102 122 152 182 222 272 332 392 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 0.018 0.016 0.018 0.015 0.016 0.045 0.041 0.045 0.039 0.043 2770 3290 3140 3400 3460 10 × 20 10 × 25 12.5 × 20 0.023 0.022 0.021 0.069 0.066 0.053 1820 2150 2360 8 × 11.5 8 × 15 10 × 12.5 8 × 20 10 × 16 0.072 0.056 0.053 0.041 0.038 0.22 0.17 0.16 0.13 0.12 760 995 1030 1250 1430 6.3 × 11 0.13 0.41 405 5 × 11 0.30 1.0 250 5 × 11 6.3 × 11 8 × 11.5 8 × 15 10 × 12.5 8 × 20 10 × 16 10 × 20 10 × 25 12.5 × 20 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 0.30 0.13 0.072 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.018 0.015 0.016 1.0 0.41 0.22 0.17 0.16 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.045 0.039 0.043 250 405 760 995 1030 1250 1430 1820 2150 2360 2770 3290 3140 3400 3460 : In this case, 6 will be put at 12th digit of type numbering system. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS HD series Standard ratings V (Code) 35 (1V) Case size φD × L (mm) 50 (1H) Case size φD × L (mm) Impedance (Ω) MAX. 20˚C / 100kHz Item Cap.(µF) 22 33 56 100 120 150 180 220 270 330 470 560 680 820 1000 1200 1500 1800 Code Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz Impedance (Ω) MAX. 20˚C / 100kHz Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz 220 330 560 101 121 151 181 221 271 331 471 561 681 821 102 122 152 182 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 8 × 15 10 × 12.5 8 × 20 10 × 16 10 × 20 10 × 25 12.5 × 20 8 × 11.5 5 × 11 6.3 × 11 5 × 11 0.34 0.14 0.074 0.061 0.061 0.046 0.042 0.030 0.028 0.027 0.023 0.021 0.019 0.023 0.021 1.18 0.50 0.22 0.18 0.18 0.14 0.12 0.090 0.085 0.068 0.059 0.052 0.051 0.059 0.056 238 385 724 950 979 1190 1370 1580 1870 2050 2410 2860 2960 2730 3010 0.30 0.13 1.0 0.41 250 405 6.3 × 11 8 × 11.5 8 × 15 0.072 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.22 0.17 0.16 0.13 0.12 0.069 0.066 0.053 760 995 1030 1250 1430 1820 2150 2360 10 × 12.5 8 × 20 10 × 16 10 × 20 10 × 25 12.5 × 20 12.5 × 25 12.5 × 31.5 12.5 × 35.5 16 × 20 0.018 0.016 0.018 0.015 0.016 0.045 0.041 0.045 0.039 0.043 2770 3290 3140 3400 3460 16 × 25 : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Cap. (µF) Frequency 50Hz 0.45 0.60 0.65 0.75 120Hz 0.55 0.70 0.75 0.80 1kHz 0.75 0.85 0.90 0.95 10kHz 0.90 0.95 0.98 1.00 100kHz 1.00 1.00 1.00 1.00 22 ~ 33 39 ~ 330 390 ~ 1000 1200 ~ 6800 CAT.8100V