UHM1C222MPD

ALUMINUM ELECTROLYTIC CAPACITORS HM Specifications Low Impedance series Lower impedance than HD,HC series. Adapted to the RoHS directive (2002/95/EC). HN Low Impedance HM Low Impedance HD ltem Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan d Stability at Low Temperature Endurance Marking Radial Lead Type Performance Characteristics Ñ40 ~ +105ûC 6.3 ~ 16V 330 ~ 12000µF ±20% (120Hz, 20ûC) After 2 minutes' application of rated voltage, leakage current is less than 0.03CV For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF Rated voltage (V) 6.3 10 16 120Hz 20ûC tan d (MAX.) 0.22 0.19 0.16 6.3 10 16 Rated voltage (V) 120Hz 3 3 3 Impedance ratio ZT / Z20 (MAX.) ZÑ40ûC/Z+20ûC After an application of D.C. bias voltage plus the rated ripple current for 2000 hours at 105ûC the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed below. Capacitance change Within ±25% of initial value tan d 200% or less of initial specified value Leakage current lnitial specified value or less Printed with white color black sleeve. fd Type numbering system (Example : 6.3V 1800µF) U HM 0 J 1 8 2 M P D 123 45 678 9 10 11 12 Size Code Configuration Capacitance tolerance (±20%) Rated Capacitance (1800µF) Rated voltage (6.3V) Series name Type Sleeve (P.E.T.) fD+0.5 MAX. P ± 0.5 Pressure relief vent L+1.5MAX. 15MIN 4MIN fD fd P Please refer to page 21 about the end seal configulation. 8 3.5 0.6 10 12.5 16 5.0 5.0 7.5 0.6 0.6 0.8 18 7.5 0.8 (mm) Configuration 8 á 10 12.5 ~ 18 fD Pb-free leadwire Pb-free PET sleeve PD HD Standard ratings V (Code) Item Code Cap.(µF) 330 470 560 331 471 561 681 821 102 122 152 182 222 272 332 562 682 822 123 Case size fD ´ L (mm) 6.3 (0J) (mArms) 20ûC / 100kHz 105ûC / 100kHz Impedance (m½) MAX. Rated ripple Case size fD ´ L (mm) 10 (1A) (mArms) 20ûC / 100kHz 105ûC / 100kHz Impedance (m½) MAX. Rated ripple Case size fD ´ L (mm) 16 (1C) 8 ´ 11.5 8 ´ 11.5 30 1140 8 ´ 11.5 10 ´ 12.5 8 ´ 11.5 8 ´ 15 10 ´ 12.5 8 ´ 11.5 8 ´ 15 10 ´ 12.5 8 ´ 20 10 ´ 16 10 ´ 16 8 ´ 20 10 ´ 20 8 ´ 20 10 ´ 16 10 ´ 20 10 ´ 25 12.5 ´ 20 10 ´ 20 12.5 ´ 25 16 ´ 25 18 ´ 25 30 28 25 30 28 25 16 18 19 16 13 16 18 13 12 11 13 10 9 8 1140 1490 1540 1140 1490 1540 1950 2000 2000 1950 2550 1950 2000 2550 2800 3000 2550 2900 3070 3250 10 ´ 12.5 8 ´ 15 10 ´ 16 8 ´ 20 10 ´ 16 8 ´ 20 10 ´ 20 10 ´ 25 12.5 ´ 20 12.5 ´ 25 16 ´ 25 18 ´ 25 30 30 25 25 28 18 18 18 18 13 12 11 10 9 8 1140 1140 1540 1540 1490 2000 1870 2000 1870 2550 2800 3000 2900 3070 3250 8 ´ 11.5 8 ´ 11.5 10 ´ 12.5 10 ´ 12.5 8 ´ 15 8 ´ 20 10 ´ 16 10 ´ 16 8 ´ 20 10 ´ 20 (mArms) 20ûC / 100kHz 105ûC / 100kHz Impedance (m½) MAX. Rated ripple 30 30 25 25 28 18 18 18 18 13 1140 1140 1540 1540 1490 1870 2000 2000 1870 2550 680 820 1000 1200 1500 10 ´ 20 10 ´ 25 12.5 ´ 20 13 12 11 2550 2800 2800 1800 2200 2700 3300 5600 6800 8200 12000 12.5 ´ 25 16 ´ 25 18 ´ 25 10 9 8 2900 3070 3250 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. : In this case, 6 will be put at 12th digit of type numbering system. Wider range of rating. : In this case, 3 will be put at 12th digit of type numbering system. : In this case, 9 will be put at 12th digit of type numbering system. CAT.8100V