UHW1A182MPD

ALUMINUM ELECTROLYTIC CAPACITORS UHW Miniature Sized, High Ripple Current, High Reliability Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UHE Smaller UHW UHV Long Life Specifications Performance Characteristics ltem Category Temperature Range –40 to +105˚C Rated Voltage Range 6.3 to 100V Rated Capacitance Range 8.2 to 15000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV (µA) Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 120Hz tan δ (MAX.) 0.21 0.18 0.15 0.13 0.11 0.10 0.09 0.09 0.08 20˚C 120Hz Tangent of loss angle (tan δ) For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Stability at Low Temperature Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Z–25˚C / Z+20˚C Impedance ratio < Z–40˚C / φD = 6.3 (MAX.) Z+20˚C φ >= 8 2 2 2 2 2 2 2 2 2 5 5 4 4 4 4 3 3 3 3 3 3 3 3 3 The following specifications shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied at 105˚C , the peak voltage shall not exceed the rated voltage. 6.3V φD < = 6.3 6000 hours 8000 hours 9000 hours φD > = 10 10000 hours 10 to 50V 7000 hours 9000 hours 10000 hours 10000 hours 63 to 100V 8000 hours 10000 hours 11000 hours 12000 hours Case size Rated voltage (V) Endurance 8×11.5 8×15 , 8×20 Capacitance change Within ± 25% of the initial capacitance value（6.3V 10V：± 30%） tan δ 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value Printed with white color letter on black sleeve. Marking Radial Lead Type Type numbering system (Example : 16V 2200µF) µ Pressure relief vent (φ6.3up) (mm) (L < 20) 1.5 (L 20) 2.0 φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Configuration φD In case L > 25 for the φ12.5 dia. unit, lead dia. φd = 0.8mm Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Pb-free leadwire Pb-free PET sleeve 5 DD 6.3 8 · 10 12.5 to 18 ED PD HD Frequency coefficient of rated ripple current Cap. (µF) Frequency 8.2 to 33 39 to 180 220 to 560 680 to 1800 2200 to 3900 4700 to 15000 120Hz 0.40 0.40 0.50 0.60 0.75 0.85 Dimension table in next page. 1kHz 0.70 0.75 0.85 0.87 0.90 0.95 10kHz 0.90 0.90 0.94 0.95 0.95 0.98 10kHz or more 1.00 1.00 1.00 1.00 1.00 1.00 CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UHW Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 220 5× 11 0.21 470 6.3×11 0.21 8× 11.5 1000 1200 1500 8× 20 820 6.3 （0J） 10 （1A） 16 （1C） Leakage Current （µA） at 20℃ after 2 minutes Impedance（Ω） MAX. Rated Ripple （mArms） （105℃/100kHz） Part Number 20℃/ 100kHz －10℃/ 100kHz 13.86 0.47 1.50 450 UHW0J221MDD 29.61 0.20 0.66 700 UHW0J471MED 0.21 51.66 0.10 0.36 1200 UHW0J821MPD 8× 15 0.21 63 0.054 0.17 1600 UHW0J102MPD 10× 12.5 0.21 75.6 0.048 0.15 1700 UHW0J122MPD 0.21 94.5 0.038 0.12 1960 UHW0J152MPD （ ） 1800 10× 16 0.21 113.4 0.030 0.090 2000 UHW0J182MPD 2200 10× 20 0.23 138.6 0.020 0.060 2500 UHW0J222MPD 2700 10× 20 0.23 170.1 0.020 0.060 2500 UHW0J272MPD 3300 10× 25 0.25 207.9 0.017 0.051 2900 UHW0J332MPD 3900 12.5× 20 0.25 245.7 0.017 0.051 2600 UHW0J392MHD 4700 12.5× 25 0.27 296.1 0.015 0.045 3200 UHW0J472MHD 5600 12.5× 31.5 0.29 352.8 0.012 0.036 3795 UHW0J562MHD 5600 12.5× 25 0.29 352.8 0.015 0.045 3200 UHW0J562MHD6 6800 12.5× 31.5 0.31 428.4 0.012 0.033 3795 UHW0J682MHD 6800 16× 20 0.31 428.4 0.015 0.045 3575 UHW0J682MHD6 8200 16× 25 0.35 516.6 0.013 0.039 3810 UHW0J822MHD 10000 16× 25 0.39 630 0.013 0.039 3810 UHW0J103MHD 12000 16× 31.5 0.43 756 0.011 0.033 4000 UHW0J123MHD 15000 16× 35.5 0.49 945 0.010 0.030 4200 UHW0J153MHD 150 5× 11 0.18 15 0.47 1.50 450 UHW1A151MDD 330 6.3× 11 0.18 33 0.20 0.66 700 UHW1A331MED 560 8× 11.5 0.18 56 0.10 0.36 1200 UHW1A561MPD 820 8× 15 0.18 82 0.054 0.17 1600 UHW1A821MPD 1000 10× 12.5 0.18 100 0.048 0.15 1700 UHW1A102MPD 1200 8× 20 0.18 120 0.038 0.12 1960 UHW1A122MPD6 1200 10×16 0.18 120 0.030 0.090 2000 UHW1A122MPD 1500 10×16 0.18 150 0.030 0.090 2000 UHW1A152MPD 1800 10× 20 0.18 180 0.020 0.060 2500 UHW1A182MPD 2200 10× 25 0.20 220 0.017 0.051 2900 UHW1A222MPD 2700 12.5× 20 0.20 270 0.017 0.051 2600 UHW1A272MHD 3300 12.5× 20 0.22 330 0.017 0.051 2600 UHW1A332MHD 3900 12.5× 25 0.22 390 0.015 0.045 3200 UHW1A392MHD 4700 12.5× 31.5 0.24 470 0.012 0.036 3795 UHW1A472MHD 4700 16× 20 0.24 470 0.015 0.045 3575 UHW1A472MHD6 5600 12.5×35.5 0.26 560 0.011 0.033 4120 UHW1A562MHD 5600 16× 25 0.26 560 0.013 0.039 3810 UHW1A562MHD6 6800 16 ×25 0.28 680 0.013 0.039 3810 UHW1A682MHD 8200 16 ×31.5 0.32 820 0.011 0.033 4000 UHW1A822MHD 10000 16 ×31.5 0.36 1000 0.011 0.033 4000 UHW1A103MHD 12000 16 ×35.5 0.40 1200 0.010 0.030 4200 UHW1A123MHD 120 5×11 0.15 19.2 0.47 1.50 450 UHW1C121MDD 270 6.3×11 0.15 43.2 0.20 0.66 700 UHW1C271MED 470 8× 11.5 0.15 75.2 0.10 0.36 1200 UHW1C471MPD 560 8× 15 0.15 89.6 0.054 0.17 1600 UHW1C561MPD 680 10 × 12.5 0.15 108.8 0.048 0.15 1700 UHW1C681MPD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UHW Dimensions Rated Voltage （V） （code） 16 （1C） Rated Capacitance （µF） 35 （1V） tan δ Leakage Current （µA） at 20℃ after 2 minutes （ ） Impedance（Ω） MAX. 20℃/ 100kHz －10℃/ 100kHz Rated Ripple （mArms） （105℃/100kHz） Part Number 820 8× 20 0.15 131.2 0.038 0.12 1960 UHW1C821MPD6 820 10× 16 0.15 131.2 0.030 0.090 2000 UHW1C821MPD 1000 8× 20 0.15 160 0.038 0.12 1960 UHW1C102MPD6 1000 10× 16 0.15 160 0.030 0.090 2000 UHW1C102MPD 1200 10× 20 0.15 192 0.020 0.060 2500 UHW1C122MPD 1200 10× 16 0.15 192 0.030 0.090 2000 UHW1C122MPD6 1500 10× 20 0.15 240 0.020 0.060 2500 UHW1C152MPD 1800 10× 25 0.15 288 0.017 0.051 2900 UHW1C182MPD 2200 12.5× 20 0.17 352 0.017 0.051 2600 UHW1C222MHD 2700 12.5× 25 0.17 432 0.015 0.045 3200 UHW1C272MHD 3300 12.5× 25 0.19 528 0.015 0.045 3200 UHW1C332MHD 3300 16× 20 0.19 528 0.015 0.045 3575 UHW1C332MHD6 3900 12.5× 31.5 0.19 624 0.012 0.036 3795 UHW1C392MHD 3900 16× 20 0.19 624 0.015 0.045 3575 UHW1C392MHD6 4700 12.5× 35.5 0.21 752 0.011 0.033 4120 UHW1C472MHD 4700 16× 25 0.21 752 0.013 0.039 3810 UHW1C472MHD6 5600 16× 25 0.23 896 0.013 0.039 3810 UHW1C562MHD 6800 16× 31.5 0.25 1088 0.011 0.033 4000 UHW1C682MHD 8200 16× 35.5 0.29 1312 0.010 0.030 4200 UHW1C822MHD 5× 11 0.13 17 0.47 1.50 450 UHW1E680MDD 68 25 （1E） Case Size φD×L（mm） 150 6.3× 11 0.13 37.5 0.20 0.66 700 UHW1E151MED 180 6.3× 11 0.13 45 0.20 0.66 700 UHW1E181MED UHW1E331MPD 330 8× 11.5 0.13 82.5 0.10 0.36 1200 390 8× 15 0.13 97.5 0.054 0.17 1600 UHW1E391MPD 470 10× 12.5 0.13 117.5 0.048 0.15 1700 UHW1E471MPD 560 8×20 0.13 140 0.038 0.12 1960 UHW1E561MPD 680 10× 16 0.13 170 0.030 0.090 2000 UHW1E681MPD 820 10× 20 0.13 205 0.020 0.060 2500 UHW1E821MPD 820 10× 16 0.13 205 0.030 0.090 2000 UHW1E821MPD6 1000 10× 20 0.13 250 0.020 0.060 2500 UHW1E102MPD 1200 10× 25 0.13 300 0.017 0.051 2900 UHW1E122MPD 1500 12.5× 20 0.13 375 0.017 0.051 2600 UHW1E152MHD 1800 12.5× 25 0.13 450 0.015 0.045 3200 UHW1E182MHD 2200 12.5× 25 0.15 550 0.015 0.045 3200 UHW1E222MHD 2200 16× 20 0.15 550 0.015 0.045 3575 UHW1E222MHD6 2700 12.5× 31.5 0.15 675 0.012 0.036 3795 UHW1E272MHD 2700 16× 20 0.15 675 0.015 0.045 3575 UHW1E272MHD6 3300 12.5×35.5 0.17 825 0.011 0.033 4120 UHW1E332MHD 3300 16 ×25 0.17 825 0.013 0.039 3810 UHW1E332MHD6 3900 16 ×25 0.17 975 0.013 0.039 3810 UHW1E392MHD 4700 16 ×31.5 0.19 1175 0.011 0.033 4000 UHW1E472MHD 5600 16 ×35.5 0.21 1400 0.010 0.030 4200 UHW1E562MHD 47 5×11 0.11 0.47 1.50 450 UHW1V470MDD 100 6.3×11 16.45 0.11 35 0.20 0.66 700 UHW1V101MED 180 8× 11.5 0.11 63 0.10 0.36 1200 UHW1V181MPD 220 8× 15 0.11 77 0.054 0.17 1600 UHW1V221MPD 270 8× 15 0.11 94.5 0.054 0.17 1600 UHW1V271MPD 270 10 × 12.5 0.11 94.5 0.048 0.15 1700 UHW1V271MPD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UHW Dimensions Rated Voltage （V） （code） 35 （1V） 50 （1H） Impedance（Ω） MAX. Leakage Current （µA） at 20℃ after 2 minutes 20℃/ 100kHz －10℃/ 100kHz 0.11 115.5 0.048 0.11 136.5 0.038 0.11 136.5 10× 16 0.11 10× 20 0.11 680 10× 25 680 820 Rated Capacitance （µF） Case Size φD×L（mm） 330 10× 12.5 390 8× 20 390 10× 16 470 560 Rated Ripple （mArms） （105℃/100kHz） Part Number 0.15 1700 UHW1V331MPD 0.12 1960 UHW1V391MPD6 0.030 0.090 2000 UHW1V391MPD 164.5 0.030 0.090 2000 UHW1V471MPD 196 0.020 0.060 2500 UHW1V561MPD 0.11 238 0.017 0.051 2900 UHW1V681MPD 10× 20 0.11 238 0.020 0.060 2500 UHW1V681MPD6 10× 25 0.11 287 0.017 0.051 2900 UHW1V821MPD 820 12.5× 20 0.11 287 0.017 0.051 2600 UHW1V821MHD6 1000 12.5× 20 0.11 350 0.017 0.051 2600 UHW1V102MHD 1200 12.5× 25 0.11 420 0.015 0.045 3200 UHW1V122MHD 1500 16×20 0.11 525 0.015 0.045 3575 UHW1V152MHD 1800 12.5× 31.5 0.11 630 0.012 0.036 3795 UHW1V182MHD 1800 16× 25 0.11 630 0.013 0.039 3810 UHW1V182MHD6 2200 12.5× 35.5 0.13 770 0.011 0.033 4120 UHW1V222MHD 2200 16× 25 0.13 770 0.013 0.039 3810 UHW1V222MHD6 3300 16× 31.5 0.15 1155 0.011 0.033 4000 UHW1V332MHD 3900 1365 tan δ （ ） 16× 35.5 0.15 0.010 0.030 4200 UHW1V392MHD 27 5×11 0.10 13.5 0.47 1.50 450 UHW1H270MDD 56 6.3×11 0.10 28 0.20 0.66 700 UHW1H560MED 100 8×11.5 0.10 50 0.10 0.36 1200 UHW1H101MPD 120 8×11.5 0.10 60 0.10 0.36 1200 UHW1H121MPD 150 8×15 0.10 75 0.054 0.17 1600 UHW1H151MPD 180 10× 12.5 0.10 90 0.048 0.15 1700 UHW1H181MPD 220 10× 12.5 0.10 110 0.048 0.15 1700 UHW1H221MPD6 220 10× 16 0.10 110 0.042 0.126 1650 UHW1H221MPD 270 8×20 0.10 135 0.038 0.12 1960 UHW1H271MPD6 270 10× 20 0.10 135 0.030 0.090 2060 UHW1H271MPD 330 10× 20 0.10 165 0.030 0.090 2060 UHW1H331MPD 390 10× 25 0.10 195 0.028 0.084 2420 UHW1H391MPD 390 10× 20 0.10 195 0.030 0.090 2060 UHW1H391MPD6 470 10× 25 0.10 235 0.028 0.084 2420 UHW1H471MPD 470 12.5× 20 0.10 235 0.027 0.081 2300 UHW1H471MHD6 560 12.5× 20 0.10 280 0.027 0.081 2300 UHW1H561MHD 680 12.5× 25 0.10 340 0.023 0.069 2800 UHW1H681MHD 820 12.5× 25 0.10 410 0.023 0.069 2800 UHW1H821MHD 820 16× 20 0.10 410 0.023 0.069 3070 UHW1H821MHD6 1000 12.5×31.5 0.10 500 0.020 0.060 3500 UHW1H102MHD 1000 16 ×25 0.10 500 0.021 0.063 3270 UHW1H102MHD6 1200 16 ×25 0.10 600 0.021 0.063 3270 UHW1H122MHD 1500 12.5× 35.5 0.10 750 0.019 0.057 3810 UHW1H152MHD 1500 16 × 25 0.10 750 0.021 0.063 3270 UHW1H152MHD6 1800 16× 31.5 0.10 900 0.019 0.057 3430 UHW1H182MHD 2200 16× 31.5 0.12 1100 0.019 0.057 3430 UHW1H222MHD 2700 16 ×35.5 0.12 1350 0.018 0.054 3600 UHW1H272MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UHW Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 80 （1K） tan δ Leakage Current （µA） at 20℃ after 2 minutes （ ） Impedance（Ω） MAX. 20℃/ 100kHz －10℃/ 100kHz Rated Ripple （mArms） （105℃/100kHz） Part Number 18 5× 11 0.09 11.34 1.20 5.40 310 UHW1J180MDD 39 6.3× 11 0.09 24.57 0.46 2.10 500 UHW1J390MED 47 6.3× 11 0.09 29.61 0.46 2.10 500 UHW1J470MED 68 8× 11.5 0.09 42.84 0.29 1.30 950 UHW1J680MPD 82 8× 11.5 0.09 51.66 0.29 1.30 950 UHW1J820MPD 8× 15 0.09 63 0.20 0.90 1230 UHW1J101MPD 120 8× 15 0.09 75.6 0.20 0.90 1230 UHW1J121MPD 120 10× 12.5 0.09 75.6 0.17 0.66 1280 UHW1J121MPD6 150 8× 20 0.09 94.5 0.16 0.66 1580 UHW1J151MPD 150 10× 12.5 0.09 94.5 0.17 0.66 1280 UHW1J151MPD6 180 8× 20 0.09 113.4 0.16 0.66 1580 UHW1J181MPD6 180 10× 16 0.09 113.4 0.115 0.47 1200 UHW1J181MPD 270 10× 20 0.09 170.1 0.088 0.34 1570 UHW1J271MPD 330 10× 25 0.09 207.9 0.072 0.28 1990 UHW1J331MPD 10× 31.5 100 63 （1J） Case Size φD×L（mm） 390 0.09 245.7 0.063 0.18 2050 UHW1J391MPD 390 12.5× 20 0.09 245.7 0.065 0.18 1990 UHW1J391MHD6 560 12.5× 25 0.09 352.8 0.049 0.14 2460 UHW1J561MHD 680 12.5× 31.5 0.09 428.4 0.044 0.13 2760 UHW1J681MHD 680 16× 20 0.09 428.4 0.050 0.15 2380 UHW1J681MHD6 820 12.5× 35.5 0.09 516.6 0.038 0.11 3040 UHW1J821MHD 820 18× 20 0.09 516.6 0.047 0.14 2460 UHW1J821MHD6 1000 12.5× 40 0.09 630 0.033 0.095 3100 UHW1J102MHD 1000 16× 25 0.09 630 0.040 0.12 2890 UHW1J102MHD6 1200 16× 31.5 0.09 756 0.025 0.072 2930 UHW1J122MHD 1200 18×25 0.09 756 0.038 0.11 2930 UHW1J122MHD6 1500 16× 35.5 0.09 945 0.023 0.066 3100 UHW1J152MHD 1500 18× 31.5 0.09 945 0.024 0.069 3100 UHW1J152MHD6 1800 16× 40 0.09 1134 0.021 0.060 3510 UHW1J182MHD 1800 18× 35.5 0.09 1134 0.022 0.063 3510 UHW1J182MHD6 2200 18× 40 0.11 1386 0.020 0.057 3860 UHW1J222MHD 12 5× 11 0.09 9.6 1.20 5.40 310 UHW1K120MDD 27 6.3× 11 0.09 21.6 0.46 2.10 500 UHW1K270MED 47 8× 11.5 0.09 37.6 0.29 1.30 950 UHW1K470MPD 68 8×15 0.09 54.4 0.20 0.90 1230 UHW1K680MPD 82 10× 12.5 0.09 65.6 0.17 0.66 1280 UHW1K820MPD 100 8× 20 0.09 80 0.16 0.66 1580 UHW1K101MPD 120 10× 16 0.09 96 0.115 0.47 1040 UHW1K121MPD 180 10 ×20 0.09 144 0.088 0.34 1430 UHW1K181MPD 180 12.5×15 0.09 144 0.115 0.47 1430 UHW1K181MHD6 220 10 ×25 0.09 176 0.072 0.28 1620 UHW1K221MPD 270 10 ×31.5 0.09 216 0.063 0.18 1750 UHW1K271MPD 270 12.5×20 0.09 216 0.065 0.18 1750 UHW1K271MHD6 390 12.5× 25 0.09 312 0.049 0.14 2210 UHW1K391MHD 470 12.5× 31.5 0.09 376 0.044 0.13 2400 UHW1K471MHD 470 16× 20 0.09 376 0.050 0.15 1950 UHW1K471MHD6 560 12.5× 35.5 0.09 448 0.038 0.11 2600 UHW1K561MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UHW Dimensions Rated Voltage （V） （code） 80 （1K） Rated Capacitance （µF） tan δ Impedance（Ω） MAX. Leakage Current （µA） at 20℃ after 2 minutes 20℃/ 100kHz －10℃/ 100kHz （ ） Rated Ripple （mArms） （105℃/100kHz） Part Number 560 18× 20 0.09 448 0.047 0.14 2270 UHW1K561MHD6 680 12.5× 40 0.09 544 0.033 0.095 2860 UHW1K681MHD 680 16× 25 0.09 544 0.040 0.12 2430 UHW1K681MHD6 820 16× 31.5 0.09 656 0.033 0.095 2640 UHW1K821MHD 820 18× 25 0.09 656 0.038 0.11 2500 UHW1K821MHD6 1000 16× 35.5 0.09 800 0.030 0.086 2860 UHW1K102MHD 1200 16× 40 0.09 960 0.028 0.081 3510 UHW1K122MHD 1200 18× 31.5 0.09 960 0.031 0.090 2860 UHW1K122MHD6 1500 18× 35.5 0.09 1200 0.028 0.081 3510 UHW1K152MHD 1800 18× 40 0.09 1440 0.027 0.076 3860 UHW1K182MHD 5× 11 0.08 1.20 5.40 310 UHW2A8R2MDD UHW2A180MED 8.2 18 100 （2A） Case Size φD×L（mm） 6.3× 11 8.2 0.08 18 0.46 2.10 500 33 8× 11.5 0.08 33 0.29 1.30 950 UHW2A330MPD 47 8× 15 0.08 47 0.20 0.90 1230 UHW2A470MPD 56 10× 12.5 0.08 56 0.17 0.66 1280 UHW2A560MPD 68 8×20 0.08 68 0.16 0.66 1580 UHW2A680MPD 82 10× 16 0.08 82 0.115 0.47 1040 UHW2A820MPD 100 10× 20 0.08 100 0.088 0.34 1430 UHW2A101MPD 100 12.5×15 0.08 100 0.115 0.47 1430 UHW2A101MHD6 120 10× 25 0.08 120 0.072 0.28 1620 UHW2A121MPD 180 12.5× 20 0.08 180 0.065 0.18 1750 UHW2A181MHD 220 12.5× 25 0.08 220 0.049 0.14 2210 UHW2A221MHD 270 12.5× 31.5 0.08 270 0.044 0.13 2400 UHW2A271MHD 270 16×20 0.08 270 0.050 0.15 1950 UHW2A271MHD6 390 12.5× 35.5 0.08 390 0.038 0.11 2600 UHW2A391MHD 390 16× 25 0.08 390 0.040 0.12 2430 UHW2A391MHD6 390 18× 20 0.08 390 0.047 0.14 2270 UHW2A391MHD3 470 12.5× 40 0.08 470 0.033 0.095 2860 UHW2A471MHD 470 18× 25 0.08 470 0.038 0.11 2500 UHW2A471MHD6 560 16× 31.5 0.08 560 0.033 0.095 2640 UHW2A561MHD 680 16× 35.5 0.08 680 0.030 0.086 2860 UHW2A681MHD 680 18× 31.5 0.08 680 0.031 0.090 2860 UHW2A681MHD6 820 16× 40 0.08 820 0.028 0.081 3510 UHW2A821MHD 820 18× 35.5 0.08 820 0.028 0.081 3510 UHW2A821MHD6 18× 40 0.08 1000 0.027 0.076 3860 UHW2A102MHD 1000 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K