UKA0J470MDD1TD

ALUMINUM ELECTROLYTIC CAPACITORS UKA For High Grade Audio Equipment, Wide Temperature Range. 105°C high quality capacitors for audio equipment. Selected materials to create superior acoustic sound. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 Qualified. Please contact us for details. UKA High Grade UKT Specifications Item Performance Characteristics – 55 to +105°C 6.3 to 50V 100 to 22000 µF ±20% at 120Hz, 20°C After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV (µA). After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV (µA). Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current ※ Rated voltage (V) Tangent of loss angle (tan δ) tan (max.) 6.3 0.30 10 0.26 16 0.22 25 0.18 35 0.16 Measurement frequency : 120Hz at 20°C 50 0.14 For capacitors with more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Impedance ratio Z(–25°C) / Z(+20°C) (max.) Z(–40°C) / Z(+20°C) Stability at Low Temperature 6.3 5 10 10 4 8 16 3 6 25 2 4 35 2 3 50 2 3 Measurement frequency : 120Hz Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C. Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on pearl blue sleeve. Capacitance Change tan δ Leakage current Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 16V 1000µF) 1 φd Sleeve (PET) 2 3 4 5 6 7 8 9 10 11 P±0.5 φD+0.5max. UK A 1 C 1 0 2 M PD 15min. L ±1.5 φD P φd 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 4min. 16 7.5 0.8 Rated capacitance (1000µF) Rated voltage (16V) φD Pb-free leadwire Pb-free PET sleeve 8 ·10 12.5 to 18 PD HD Series name (mm) Pressure relief vent Configuration Capacitance tolerance (±20%) Type 18 7.5 0.8 In case L>25 for φ12.5 (D) case sizes, lead diameter φ0.8 (d) will be applied.  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Frequency coefficient of rated ripple current Cap.(µF) Frequency 100 to 470 1000 to 22000 50Hz 0.80 0.85 120Hz 1.00 1.00 300Hz 1.23 1.10 1kHz 1.34 1.13 10kHz or more 1.50 1.15 Dimension table in next page. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS UKA Dimensions Rated Voltage （V） （code） 6.3 （0J） Rated Capacitance （µF） 470 8×11.5 0.30 1000 10× 12.5 0.30 189 2200 10× 20 0.32 415.8 3300 12.5 ×20 0.34 623.7 4700 12.5× 25 0.36 888.3 6800 12.5× 35.5 0.40 12.5× 40 15000 16×35.5 22000 18 ×40 330 470 16 （1C） 25 （1E） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes tan δ 10000 10 （1A） Leakage Current （µA） Case Size φD×L（mm） 88.83 Part Number 29.61 270 　UKA0J471MPD 63 420 　UKA0J102MPD 138.6 710 　UKA0J222MPD 207.9 910 　UKA0J332MHD 296.1 1120 　UKA0J472MHD 1285.2 428.4 1360 　UKA0J682MHD 0.48 1890 630 1650 　UKA0J103MHD 0.58 2835 945 2010 　UKA0J153MHD 0.72 4158 1386 2350 　UKA0J223MHD 8× 11.5 0.26 99 33 240 　UKA1A331MPD 8× 11.5 0.26 141 47 280 　UKA1A471MPD 1000 10 ×16 0.26 300 100 500 　UKA1A102MPD 2200 12.5× 20 0.28 660 220 810 　UKA1A222MHD 3300 12.5×25 0.30 990 330 1050 　UKA1A332MHD 4700 12.5×35.5 0.32 1410 470 1300 　UKA1A472MHD 6800 12.5×40 0.36 2040 680 1570 　UKA1A682MHD 10000 16× 35.5 0.44 3000 1000 1890 　UKA1A103MHD 15000 18× 40 0.54 4500 1500 2400 　UKA1A153MHD 330 8× 11.5 0.22 158.4 52.8 265 　UKA1C331MPD 470 8×11.5 0.22 225.6 75.2 315 　UKA1C471MPD 1000 10× 16 0.22 480 160 560 　UKA1C102MPD 2200 12.5× 20 0.24 1056 352 920 　UKA1C222MHD 3300 12.5× 30.5 0.26 1584 528 1270 　UKA1C332MHD 4700 12.5×35.5 0.28 2256 752 1480 　UKA1C472MHD 6800 16× 30.5 0.32 3264 1088 1780 　UKA1C682MHD 10000 18× 35.5 0.40 4800 1600 2060 　UKA1C103MHD 220 8×11.5 0.18 165 55 240 　UKA1E221MPD 330 8×11.5 0.18 247.5 82.5 290 　UKA1E331MPD 470 10 ×12.5 0.18 352.5 117.5 380 　UKA1E471MPD 10× 20 0.18 750 250 680 　UKA1E102MPD 1000 2200 12.5×30.5 0.20 1650 550 1200 　UKA1E222MHD 3300 12.5×35.5 0.22 2475 825 1400 　UKA1E332MHD 4700 16× 30.5 0.24 3525 1175 1710 　UKA1E472MHD 6800 18× 35.5 0.28 5100 1700 2040 　UKA1E682MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS UKA Dimensions Rated Voltage （V） （code） 35 （1V） 50 （1H） Leakage Current （µA） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes Rated Capacitance （µF） Case Size φD×L（mm） tan δ 220 8× 11.5 0.16 231 330 10× 12.5 0.16 470 10× 16 0.16 1000 12.5× 25 0.16 1050 2200 12.5× 40 0.18 2310 Part Number 77 260 　UKA1V221MPD 346.5 115.5 350 　UKA1V331MPD 493.5 164.5 460 　UKA1V471MPD 350 860 　UKA1V102MHD 770 1260 　UKA1V222MHD 3300 16× 35.5 0.20 3465 1155 1610 　UKA1V332MHD 4700 18× 35.5 0.22 4935 1645 1910 　UKA1V472MHD 100 8×11.5 0.14 150 50 190 　UKA1H101MPD 220 10×12.5 0.14 330 110 300 　UKA1H221MPD 330 10×16 0.14 495 165 410 　UKA1H331MPD 470 12.5× 20 0.14 705 235 530 　UKA1H471MHD 1000 12.5× 30.5 0.14 1500 500 1040 　UKA1H102MHD 2200 16×35.5 0.16 3300 1100 1470 　UKA1H222MHD 3300 18× 35.5 0.18 4950 1650 1770 　UKA1H332MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100M