UKA1E221MPD1TD

ALUMINUM ELECTROLYTIC CAPACITORS UKA For High Grade Audio Equipment, Wide Temperature Range. 105°C high quality capacitors for audio equipment. Selected materials to create superior acoustic sound. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UKA High Grade UKT Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics – 55 to +105°C 6.3 to 50V 22 to 22000 µF ±20% at 120Hz, 20°C After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Rated voltage (V) Tangent of loss angle (tan δ) tan 6.3 0.30 (MAX.) 10 0.26 16 0.22 25 0.18 35 0.16 Measurement frequency : 120Hz at 20°C 50 0.14 For capacitors with more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Impedance ratio Z–25°C / Z+20°C (MAX.) Z–40°C / Z+20°C Stability at Low Temperature 6.3 5 10 10 4 8 16 3 6 25 2 4 35 2 3 50 2 3 Measurement frequency : 120Hz Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C. Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on pearl blue sleeve. Radial Lead Type Capacitance Change tan δ Leakage current Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 16V 1000µF) 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 P ±0.5 φD+ 0.5MAX. UK A 1 C 1 0 2 M PD L+ 1.5 MAX. Pressure relief vent (φ6.3up) 15MIN 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 Rated capacitance (1000µF) Rated voltage (16V) 4MIN Series name (mm) φD P φd Configuration Capacitance tolerance (±20%) 16 7.5 0.8 Type 18 7.5 0.8 φD Pb-free leadwire Pb-free PET sleeve 5 6.3 8 ·10 12.5 to 18 DD ED PD HD In case L>25 for φ12.5 (D) case sizes, lead diameter φ0.8 (d) will be applied. Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Frequency coefficient of rated ripple current Cap.(µF) Frequency 22 to 47 100 to 470 1000 to 22000 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 10kHz or more 2.00 1.50 1.15 Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UKA Dimensions Rated Voltage （V） （code） 6.3 （0J） Rated Capacitance （µF） 22 5×11 0.30 4.158 3 45 UKA0J220MDD 33 5×11 0.30 6.237 3 55 UKA0J330MDD 47 5×11 0.30 8.883 3 65 UKA0J470MDD 100 5×11 0.30 18.9 6.3 95 UKA0J101MDD 220 6.3× 11 0.30 41.58 13.86 160 UKA0J221MED 330 6.3× 11 0.30 62.37 20.79 195 UKA0J331MED 88.83 29.61 270 UKA0J471MPD 63 420 UKA0J102MPD Part Number 470 8×11.5 0.30 1000 10× 12.5 0.30 189 2200 10× 20 0.32 415.8 138.6 710 UKA0J222MPD 3300 12.5 ×20 0.34 623.7 207.9 910 UKA0J332MHD 4700 12.5× 25 0.36 888.3 296.1 1120 UKA0J472MHD 6800 12.5× 35.5 0.40 1285.2 428.4 1360 UKA0J682MHD 12.5× 40 0.48 1890 630 1650 UKA0J103MHD 15000 16×35.5 0.58 2835 945 2010 UKA0J153MHD 22000 18 ×40 0.72 4158 1386 2350 UKA0J223MHD 22 5× 11 0.26 6.6 3 45 UKA1A220MDD 33 5× 11 0.26 9.9 3.3 58 UKA1A330MDD 47 5× 11 0.26 14.1 4.7 68 UKA1A470MDD 100 5× 11 0.26 30 10 105 UKA1A101MDD 220 6.3×11 0.26 66 22 175 UKA1A221MED 330 8× 11.5 0.26 99 33 240 UKA1A331MPD 470 8× 11.5 0.26 141 47 280 UKA1A471MPD 1000 10 ×16 0.26 300 100 500 UKA1A102MPD 2200 12.5× 20 0.28 660 220 810 UKA1A222MHD 3300 12.5×25 0.30 990 330 1050 UKA1A332MHD 4700 12.5×35.5 0.32 1410 470 1300 UKA1A472MHD 6800 12.5×40 0.36 2040 680 1570 UKA1A682MHD 10000 16× 35.5 0.44 3000 1000 1890 UKA1A103MHD 15000 18× 40 0.54 4500 1500 2400 UKA1A153MHD 22 5×11 0.22 10.56 3.52 54 UKA1C220MDD 33 5×11 0.22 15.84 5.28 65 UKA1C330MDD 47 5×11 0.22 22.56 7.52 79 UKA1C470MDD 100 5×11 0.22 48 16 115 UKA1C101MDD 220 6.3× 11 0.22 105.6 35.2 190 UKA1C221MED 8×11.5 0.22 158.4 52.8 265 UKA1C331MPD 8×11.5 75.2 315 UKA1C471MPD 560 UKA1C102MPD 330 16 （1C） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes tan δ 10000 10 （1A） Leakage Current （µA） Case Size φD×L（mm） 0.22 225.6 1000 470 10× 16 0.22 480 160 2200 12.5× 20 0.24 1056 352 920 UKA1C222MHD 3300 12.5× 31.5 0.26 1584 528 1270 UKA1C332MHD 4700 12.5× 35.5 0.28 2256 752 1480 UKA1C472MHD 6800 16 ×31.5 0.32 3264 1088 1780 UKA1C682MHD 10000 18 × 35.5 0.40 4800 1600 2060 UKA1C103MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UKA Dimensions Rated Voltage （V） （code） 25 （1E） 35 （1V） 50 （1H） Rated Capacitance （µF） Leakage Current （µA） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes Case Size φD×L（mm） tan δ 22 5× 11 0.18 16.5 33 5× 11 0.18 47 5× 11 0.18 100 6.3×11 Part Number 5.5 58 UKA1E220MDD 24.75 8.25 68 UKA1E330MDD 35.25 11.75 83 UKA1E470MDD 0.18 75 25 140 UKA1E101MED 220 8× 11.5 0.18 165 55 240 UKA1E221MPD 330 8× 11.5 0.18 247.5 82.5 290 UKA1E331MPD 470 10 ×12.5 0.18 352.5 117.5 380 UKA1E471MPD 1000 10 ×20 0.18 750 250 680 UKA1E102MPD 2200 12.5×31.5 0.20 1650 550 1200 UKA1E222MHD 3300 12.5×35.5 0.22 2475 825 1400 UKA1E332MHD 4700 16× 31.5 0.24 3525 1175 1710 UKA1E472MHD 6800 18× 35.5 0.28 5100 1700 2040 UKA1E682MHD 22 5×11 0.16 23.1 7.7 61 UKA1V220MDD 33 5×11 0.16 34.65 11.55 75 UKA1V330MDD 47 5×11 0.16 49.35 16.45 93 UKA1V470MDD 100 6.3× 11 0.16 105 35 150 UKA1V101MED 220 8×11.5 0.16 231 77 260 UKA1V221MPD 330 10× 12.5 0.16 346.5 115.5 350 UKA1V331MPD 493.5 164.5 460 UKA1V471MPD 350 860 UKA1V102MHD 470 10× 16 0.16 1000 12.5 ×25 0.16 1050 2200 12.5 ×40 0.18 2310 770 1260 UKA1V222MHD 0.20 3465 1155 1610 UKA1V332MHD 3300 16× 35.5 4700 18×35.5 0.22 4935 1645 1910 UKA1V472MHD 22 5×11 0.14 33 11 68 UKA1H220MDD 33 5×11 0.14 49.5 16.5 90 UKA1H330MDD 47 6.3×11 0.14 70.5 23.5 115 UKA1H470MED 100 8× 11.5 0.14 150 50 190 UKA1H101MPD 220 10×12.5 0.14 330 110 300 UKA1H221MPD 330 10 ×16 0.14 495 165 410 UKA1H331MPD 470 12.5× 20 0.14 705 235 530 UKA1H471MHD 1000 12.5× 31.5 0.14 1500 500 1040 UKA1H102MHD 2200 16 ×35.5 0.16 3300 1100 1470 UKA1H222MHD 3300 18 ×35.5 0.18 4950 1650 1770 UKA1H332MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K