UKL1C331MPD1TD

ALUMINUM ELECTROLYTIC CAPACITORS UKL Low Leakage Current Standard low leakage current series. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. UVR UKL Low Leakage Current Specifications Item Performance   Characteristics Category Temperature Range –40 to +85°C ( –40 to +105°C product is also available upon request, but product rated at up to 50V less than or equal to φ10 × 12.5 Lmm) Rated Voltage Range 6.3 to 100V Rated Capacitance Range 1.5 to 10000µF Capacitance Tolerance ± 20% (M), ± 10% (K) at 120Hz 20°C Leakage Current ※ After 1 minute's (for case size 10 × 12.5 or smaller) or 2 minutes' (for case size 10 × 16 or larger) application of rated voltage at 20°C, leakage current is not more than 0.002CV or 0.2 (µA) whichever is greater. Rated voltage (V) Less than φ10 × 12.5 tan δ (max.) φ10 × 16 or more Tangent of loss angle (tan δ) 10 0.15 0.17 6.3 0.18 0.21 35 0.08 0.12 25 0.08 0.12 16 0.12 0.14 50 0.08 0.10 63 0.07 0.08 100 0.07 0.08 120Hz,  20°C 50 1.5 2 (3) 63 1.5 2 (3) 100 1.5 2 (3) 120Hz For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Z(–25°C) / Z(+20°C) Z(–40°C) / Z(+20°C) Impedance ratio (max.) stability at Low Temperature 6.3 3 (4) 5 (8) 10 2 (3) 4 (6) 25 1.5 2 (4) 16 2 3 (4) 35 1.5 2 (3) Values in ( ) applicable to φ10 × 16 or larger case size. Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C, or 1000 hours at 105°C. Shelf Life After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Capacitance change Within ±15% of the initial capacitance value (6.3V : Within ±20%) 150% or less than the initial specified value tan δ Less than or equal to the initial specified value Leakage current ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 10V 47µF) Sleeve (PET) φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 φd P±0.5 P±0.5 Pressure relief vent (φ6.3up ) L± L+ MAX. 15min. 15 MIN 4min. 4 MIN 1 Configuration (mm) φD 5 6.3 8 10 12.5 16 18 φD＜8 φD≧8 P 1.0 2.0 φD 2.5 5 3.5 6.35.0 8 5.0 107.5 12.57.5 16 (φ10 × 12.5 or smaller) φd 1.5 0.5 P 0.5 2.00.6 2.50.6 3.5 0.6 5.00.8 5.0 0.8 7.5 (φ10 × 16 or or greater) 7.5 0.5 0.8 φd 0.5 0.6 0.6 0.6 0.8 (mm) 18  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Pb-free leadwire 1 Configuration φD Pb-free PET sleeve 5φ D 6.3 5 8 · 10 6.3 12.5 to 18 8 · 10 12.5 to 18 2 Configuration 1 2 Capacitance tolerance (M : ±20%, K : ±10%)1 Configuration Capacitance tolerance Rated capacitance (47µF) (M : ±20%, K : ±10%) Rated voltage Rated capacitance (10V) (47µF) Series name Rated voltage (10V) Type Series name 2 In case 105°C unit is required Type (φ6.3up ) Pressure relief vent 11 12 13 14 U1 K2 L3 14 A5 46 77 08 M9 D10 D11 A12 N13 A14 UK L 1 A 4 7 0 M DD A N A φD+0.5max. φD+0.5MAX. 1 2 In case 105°C unit is required Pb-free DD leadwire Pb-free PET sleeve ED DD PD ED HD PD HD Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 1.5 to 68 0.75 1.00 1.35 1.57 2.00 100 to 680 0.80 1.00 1.23 1.34 1.50 1000 to 10000 0.85 1.00 1.10 1.13 1.15 Cap.(µF) Dimension table in next page. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UKL Dimensions Rated Voltage （V） （code） 6.3 （0J） 10 （1A） 16 （1C） 25 （1E） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Leakage Current （µA） at 20℃ after at 20℃ after 1 minute 2 minutes 470 10× 12.5 0.18 5.922 680 10 ×16 0.21 － 1000 10 ×20 0.21 － 12.6 1500 12.5× 25 0.21 － 2200 12.5× 25 0.23 － 3300 16 ×25 0.25 4700 16 ×30.5 6800 18 ×35.5 10000 47 Rated Ripple （mArms） （85℃/120Hz） Part Number － 390 　UKL0J471MPD 8.568 480 　UKL0J681MPD 650 　UKL0J102MPD 18.9 910 　UKL0J152MHD 27.72 1060 　UKL0J222MHD － 41.58 1270 　UKL0J332MHD 0.27 － 59.22 1500 　UKL0J472MHD 0.31 － 85.68 1760 　UKL0J682MHD 18 ×40 0.39 － 1900 　UKL0J103MHD 5× 11 0.15 0.94 110 ※UKL1A470MDD 126 － 68 6.3×11 0.15 1.36 － 150 ※UKL1A680MED 100 6.3×11 0.15 2 － 180 ※UKL1A101MED 150 8×11.5 0.15 3 － 250 　UKL1A151MPD 220 8×11.5 0.15 4.4 － 310 　UKL1A221MPD 6.6 330 10× 12.5 0.15 － 400 　UKL1A331MPD 470 10× 16 0.17 － 9.4 530 　UKL1A471MPD 680 10× 20 0.17 － 13.6 600 　UKL1A681MPD 1000 12.5×20 0.17 － 20 810 　UKL1A102MHD 1500 12.5×25 0.17 － 30 1020 　UKL1A152MHD 2200 16× 25 0.19 － 44 1200 　UKL1A222MHD 3300 16× 30.5 0.21 － 66 1420 　UKL1A332MHD 4700 16× 35.5 0.23 － 94 1650 　UKL1A472MHD 6800 18× 35.5 0.27 － 136 1890 　UKL1A682MHD 10 5× 11 0.12 0.32 － 55 ※UKL1C100MDD 15 5× 11 0.12 0.48 － 70 ※UKL1C150MDD 22 5× 11 0.12 0.704 － 85 ※UKL1C220MDD 33 5× 11 0.12 1.056 － 100 ※UKL1C330MDD 47 6.3×11 0.12 1.504 － 140 ※UKL1C470MED 68 6.3×11 0.12 2.176 － 160 ※UKL1C680MED 100 8× 11.5 0.12 3.2 － 230 　UKL1C101MPD 150 8× 11.5 0.12 4.8 － 280 　UKL1C151MPD 220 10 ×12.5 0.12 7.04 － 370 　UKL1C221MPD 330 10×16 0.14 － 10.56 420 　UKL1C331MPD 470 10× 20 0.14 － 15.04 550 　UKL1C471MPD 680 12.5×20 0.14 － 21.76 730 　UKL1C681MHD 1000 12.5×25 0.14 － 32 910 　UKL1C102MHD 1500 16× 25 0.14 － 48 1150 　UKL1C152MHD 2200 16× 25 0.16 － 70.4 1300 　UKL1C222MHD 3300 16× 35.5 0.18 － 105.6 1550 　UKL1C332MHD 4700 150.4 18× 35.5 0.20 － 1820 　UKL1C472MHD 4.7 5×11 0.08 0.235 － 45 ※UKL1E4R7MDD 6.8 5 × 11 0.08 0.34 － 55 ※UKL1E6R8MDD 10 5 × 11 0.08 0.5 － 70 ※UKL1E100MDD 15 5 × 11 0.08 0.75 － 85 ※UKL1E150MDD 22 5 × 11 0.08 1.1 － 100 ※UKL1E220MDD 33 6.3× 11 0.08 1.65 － 140 ※UKL1E330MED For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UKL Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 47 25 （1E） 35 （1V） 6.3× 11 tan δ Leakage Current （µA） at 20℃ after at 20℃ after 1 minute 2 minutes Rated Ripple （mArms） （85℃/120Hz） Part Number 0.08 2.35 － 170 ※UKL1E470MED 68 8×11.5 0.08 3.4 － 230 　UKL1E680MPD 100 8× 11.5 0.08 5 － 280 　UKL1E101MPD 150 10× 12.5 0.08 7.5 － 370 　UKL1E151MPD 220 10× 16 0.12 － 11 400 　UKL1E221MPD 330 10× 20 0.12 － 16.5 490 　UKL1E331MPD 470 12.5× 20 0.12 － 23.5 660 　UKL1E471MHD 680 12.5× 25 0.12 － 34 810 　UKL1E681MHD 1000 16×25 0.12 － 50 1010 　UKL1E102MHD 1500 16×30.5 0.12 － 75 1270 　UKL1E152MHD 2200 16×35.5 0.14 － 110 1440 　UKL1E222MHD 3300 18×40 0.16 － 165 1720 　UKL1E332MHD 15 5× 11 0.08 1.05 － 85 ※UKL1V150MDD 22 6.3× 11 0.08 1.54 － 110 ※UKL1V220MED 33 6.3× 11 0.08 2.31 － 140 ※UKL1V330MED 47 8× 11.5 0.08 3.29 － 190 　UKL1V470MPD 68 8× 11.5 0.08 4.76 － 230 　UKL1V680MPD 100 10× 12.5 0.08 7 － 300 　UKL1V101MPD 150 10× 16 0.12 － 10.5 400 　UKL1V151MPD 220 10× 20 0.12 － 15.4 440 　UKL1V221MPD 330 12.5× 20 0.12 － 23.1 550 　UKL1V331MHD 470 12.5× 25 0.12 － 32.9 680 　UKL1V471MHD 680 16× 25 0.12 － 47.6 840 　UKL1V681MHD 1000 16× 25 0.12 － 70 1100 　UKL1V102MHD 1500 16× 35.5 0.12 － 105 1390 　UKL1V152MHD 2200 18× 35.5 0.14 － 154 1580 　UKL1V222MHD 1.5 5× 11 0.08 0.2 － 16 ※UKL1H1R5MDD 2.2 5× 11 0.08 0.22 － 23 ※UKL1H2R2MDD 3.3 5× 11 0.08 0.33 － 40 ※UKL1H3R3MDD 4.7 5× 11 0.08 0.47 － 45 ※UKL1H4R7MDD 6.8 5× 11 0.08 0.68 － 55 ※UKL1H6R8MDD 10 5×11 0.08 1 － 70 ※UKL1H100MDD 15 6.3×11 0.08 1.5 － 95 ※UKL1H150MED 22 6.3×11 0.08 2.2 － 110 ※UKL1H220MED 8×11.5 0.08 3.3 － 165 　UKL1H330MPD 47 8×11.5 0.08 4.7 － 190 　UKL1H470MPD 68 10× 12.5 0.08 6.8 － 250 　UKL1H680MPD 100 10× 16 0.10 － 10 320 　UKL1H101MPD 150 10× 20 0.10 － 15 420 　UKL1H151MPD 220 12.5× 20 0.10 － 22 490 　UKL1H221MHD 330 12.5× 20 0.10 － 33 600 　UKL1H331MHD 470 16 × 25 0.10 － 47 760 　UKL1H471MHD 680 16× 25 0.10 － 68 910 　UKL1H681MHD 1000 16× 30.5 0.10 － 100 1140 　UKL1H102MHD 1500 18× 40 0.10 － 150 1480 　UKL1H152MHD 33 50 （1H） Case Size φD×L（mm） For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UKL Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 6.8 63 （1J） 100 （2A） Case Size φD×L（mm） tan δ Leakage Current （µA） at 20℃ after at 20℃ after 1 minute 2 minutes Rated Ripple （mArms） （85℃/120Hz） Part Number 5×11 0.07 0.8568 － 59 ※UKL1J6R8MDD 10 6.3×11 0.07 1.26 － 75 ※UKL1J100MED 15 6.3×11 0.07 1.89 － 100 ※UKL1J150MED 22 8×11.5 0.07 2.772 － 115 　UKL1J220MPD 33 8×11.5 0.07 4.158 － 170 　UKL1J330MPD 47 10× 12.5 0.07 5.922 － 200 　UKL1J470MPD 8.568 68 10× 16 0.08 － 270 　UKL1J680MPD 100 10 ×20 0.08 － 12.6 330 　UKL1J101MPD 150 12.5 ×20 0.08 － 18.9 450 　UKL1J151MHD 220 12.5 ×20 0.08 － 27.72 550 　UKL1J221MHD 330 12.5 ×25 0.08 － 41.58 710 　UKL1J331MHD 470 16 ×25 0.08 － 59.22 850 　UKL1J471MHD 680 16 ×30.5 0.08 － 85.68 1050 　UKL1J681MHD 1000 18×35.5 0.08 1330 　UKL1J102MHD 1.5 5×11 0.07 0.3 － 126 － 23 ※UKL2A1R5MDD 2.2 5×11 0.07 0.44 － 28 ※UKL2A2R2MDD 3.3 5×11 0.07 0.66 － 45 ※UKL2A3R3MDD 4.7 5× 11 0.07 0.94 － 50 ※UKL2A4R7MDD 6.8 6.3× 11 0.07 1.36 － 65 ※UKL2A6R8MED 10 8×11.5 0.07 2 － 90 　UKL2A100MPD 15 8×11.5 0.07 3 － 110 　UKL2A150MPD 22 10× 12.5 0.07 4.4 － 136 　UKL2A220MPD 33 10× 16 0.08 － 6.6 180 　UKL2A330MPD 47 10× 20 0.08 － 9.4 220 　UKL2A470MPD 68 10× 20 0.08 － 13.6 290 　UKL2A680MPD 100 12.5× 20 0.08 － 20 370 　UKL2A101MHD 150 12.5× 25 0.08 － 30 470 　UKL2A151MHD 220 16× 25 0.08 － 44 580 　UKL2A221MHD 330 16× 30.5 0.08 － 66 730 　UKL2A331MHD 470 18× 35.5 0.08 － 94 910 　UKL2A471MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L