UKL1E332MDD

ALUMINUM ELECTROLYTIC CAPACITORS KL Low Leakage Current series Standard low leakage current series. Adapted to the RoHS directive (2002/95/EC). VR Low Leakage Current KL Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics – 40 ~ +85°C ( 6.3 ~ 100V 0.1 ~ 10000µF – 40 ~ +105°C product also available upon request, but product rated at up to 50V less than or equal to φ10 × 12.5 Lmm) ± 20% (M), ± 10% (K) at 120Hz 20°C After 1 minute's (for case size 10 × 12.5 or smaller) or 2 minute's (for case size 10 × 16 or larger) application of rated voltage, leakage current is not more than 0.002CV or 0.2 (µA) whichever is greater. Rated voltage (V) ~φ10 × 12.5 φ10 × 16 ~ tan δ tan δ ( MAX.) 6.3 0.18 0.21 10 0.15 0.17 16 0.12 0.14 25 0.08 0.12 35 0.08 0.12 50 0.08 0.10 63 0.07 0.08 100 0.07 0.08 120Hz, 20°C For capacitance of more than 1000µF, add 0.02 for every increace of 1000µF. Rated voltage (V) Impedance ratio Z– 25°C / Z+20°C ZT / Z20 (MAX.) Z– 40°C / Z+20°C stability at Low Temperature 6.3 3 (4) 5 (8) 10 2 (3) 4 (6) 16 2 3 (4) 25 1.5 2 (4) 35 1.5 2 (3) 50 1.5 2 (3) 63 1.5 2 (3) 100 1.5 2 (3) 120Hz Values in ( ) applicable to φ10 × 16 or larger case size. Endurance After 2000 hours' application of rated voltage at 85°C, or 1000 hours' at 105°C, capacitors meet the characteristics requirements listed at right. Capacitance change tan δ Leakage current Within ±15% of initial value (6.3V : Within ±20%) 150% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 85˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Radial Lead Type Sleeve (P.E.T.) φd Type numbering system (Example : 10V 47µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 UK L 1 A 4 7 0 MDD ANA φD+0.5MAX. P ± 0.5 2 Configuration 1 Capacitance tolerance (M : ± 20%, K : ± 10%) Rated Capacitance (47µF) Rated voltage (10V) Series name Type Pressure relief vent (φ6.3up ) L+ MAX. 15 MIN 4 MIN (mm) (~ φ10 × 12.5) 1.0 (φ10 × 16 ~) 1.5 φD P φd 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 1 Configuration φD 5 6.3 8 · 10 12.5 ~ 18 Pb-free leadwire Pb-free PET sleeve 2 In case 105°C unit is required DD ED PD HD • Please refer to page 21 about the end seal configulation. Frequency coefficient of rated ripple current Cap.(µF) Frequency 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 10kHz ~ 2.00 1.50 1.15 ~ 68 100 ~ 680 1000 ~ 10000 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V-1 ALUMINUM ELECTROLYTIC CAPACITORS KL Cap.(µF) series Dimensions V Code 6.3 0J 10 1A 16 1C 25 1E 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 31.5 16 × 35.5 18 × 40 45 55 70 85 100 140 170 230 280 370 400 490 660 810 1010 1270 1440 1720 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 4R7 6R8 100 150 220 330 470 680 101 151 221 331 471 681 102 152 222 332 472 682 103 10 × 12.5 10 × 16 10 × 20 12.5 × 25 12.5 × 25 16 × 25 16 × 31.5 18 × 35.5 18 × 40 390 480 650 910 1060 1270 1500 1760 1900 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 31.5 16 × 35.5 18 × 35.5 110 150 180 250 310 400 530 600 810 1020 1200 1420 1650 1890 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 25 16 × 35.5 18 × 35.5 55 70 85 100 140 160 230 280 370 420 550 730 910 1150 1300 1550 1820 V Cap.(µF) Code 35 1V 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 20 12.5 × 20 16 × 25 16 × 25 16 × 31.5 18 × 40 1.1 1.6 2.3 3.5 5.0 7.3 10.7 16 23 40 45 55 70 95 110 165 190 250 320 420 490 600 760 910 1140 1480 63 1J 100 2A 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 16 10 × 20 10 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 31.5 18 × 35.5 2.1 3.2 4.7 7.0 10.1 14.5 19 23 28 45 50 65 90 110 136 180 220 290 370 470 580 730 910 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 0R1 R15 R22 R33 R47 R68 010 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 151 221 331 471 681 102 152 222 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 25 16 × 35.5 18 × 35.5 85 110 140 190 230 300 400 440 550 680 840 1100 1390 1580 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 31.5 18 × 35.5 59 75 100 115 170 200 270 330 450 550 710 850 1050 1330 Case size φ D × L (mm) Rated ripple Rated Ripple (mArms) at 85°C 120Hz Rated Ripple (mA rms) of 105°C product : 70 percent value of rated ripple of 85°C product at 105°C 120Hz CAT.8100V-1