UKT1A221MED1TD

ALUMINUM ELECTROLYTIC CAPACITORS UKT For General Audio Equipment, Wide Temperature Range. UKA High Sound Quality 105°C standard for audio equipment. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UKT Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. High Sound Quality UVZ Specifications Performance Characteristics Item –55 to +105°C 6.3 to 50V 2.2 to 33000µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA) , whichever is greater. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current ※ Tangent of loss angle (tan δ) Rated voltage (V) tan δ (max.) 6.3 0.30 10 0.26 16 0.22 25 0.18 35 0.16 Measurement frequency : 120Hz at 20°C 50 0.14 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF Rated voltage (V) Z(– 25°C) / Z(+20°C) Z(– 40°C) / Z(+20°C) Stability at Low Temperature Impedance ratio (max.) 6.3 5 10 10 4 8 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Endurance 25 2 4 16 3 6 Capacitance change tan δ Leakage current 35 2 3 50 2 3 Measurement frequency : 120Hz Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C tor 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with black color letter on pearl blue sleeve. Shelf Life Marking ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 16V 1000µF) 11 22 33 φφdd Sleeve Sleeve(PET) (PET) 44 55 66 77 88 99 10 10 11 11 P±0.5 P±0.5 φD+ max. max. φD+ UU KK TT 11 CC 11 00 22 M M PP DD 15min. 15min. L± L± Series Seriesname name Type Type Configuration Configuration (mm) (mm) 55 2.0 2.0 0.5 0.5 0.5 0.5 1.5 1.5 Rated Ratedcapacitance capacitance(1000µF) (1000µF) Rated Ratedvoltage voltage(16V) (16V) 4min. 4min. Pressure Pressure relief reliefvent vent (φ6.3up) (φ6.3up) φD φD PP φd φd 6.3 6.3 2.5 2.5 0.5 0.5 0.5 0.5 1.5 1.5 88 3.5 3.5 0.6 0.6 0.5 0.5 1.5 1.5 Configuration Configuration Capacitance Capacitancetolerance tolerance(±20%) (±20%) 10 10 12.5 12.5 5.0 5.0 5.0 5.0 0.6 0.6 0.6 0.6 0.5 0.5 0.5 0.5 1.5 1.5 1.5 1.5 16 16 7.5 7.5 0.8 0.8 0.5 0.5 1.5 1.5 18 18 20 20 7.5 7.5 10.0 10.0 0.8 0.8 1.0 1.0 0.5 0.5 0.5 0.5 1.5 1.5 1.5 1.5 22 22 10.0 10.0 1.0 1.0 1.0 1.0 2.0 2.0 25 25 12.5 12.5 1.0 1.0 1.0 1.0 2.0 2.0 φφDD 55 6.3 6.3 88· ·10 10 12.5 12.5toto18 18 20 20toto25 25 Pb-free Pb-freeleadwire leadwire Pb-free Pb-freePET PETsleeve sleeve DD DD ED ED PD PD HD HD RD RD InIncase caseL>25 L>25for forφ12.5 φ12.5(D) (D)case casesizes, sizes, lead leaddiameter diameterφ0.8 φ0.8(d) (d) will willbe beapplied. applied.  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Frequency coefficient of rated ripple current Cap.(µF) Frequency 2.2 to 47 100 to 470 1000 to 33000 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 10kHz or more 2.00 1.50 1.15 Dimension table in next page. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UKT Dimensions Rated Voltage （V） （code） 6.3 （0J） Rated Capacitance （µF） 22 5× 11 0.30 4.158 3 45 ※UKT0J220MDD 33 5× 11 0.30 6.237 3 55 ※UKT0J330MDD 47 5× 11 0.30 8.883 3 65 ※UKT0J470MDD 100 5× 11 0.30 18.9 6.3 95 ※UKT0J101MDD 220 6.3× 11 0.30 41.58 13.86 160 ※UKT0J221MED 330 6.3× 11 0.30 62.37 20.79 195 ※UKT0J331MED 88.83 29.61 270 　UKT0J471MPD 63 420 　UKT0J102MPD at 20℃ after at 20℃ after 1 minute 2 minutes 470 8× 11.5 0.30 1000 10× 12.5 0.30 189 Part Number 2200 10× 20 0.32 415.8 138.6 710 　UKT0J222MPD 3300 12.5×20 0.34 623.7 207.9 910 　UKT0J332MHD 4700 12.5×25 0.36 888.3 296.1 1120 　UKT0J472MHD 6800 12.5×35.5 0.40 1285.2 428.4 1360 　UKT0J682MHD 12.5×40 0.48 1890 630 1650 　UKT0J103MHD 15000 16× 35.5 0.58 2835 945 2010 　UKT0J153MHD 22000 18× 40 0.72 4158 1386 2350 　UKT0J223MHD 33000 22× 50 0.94 6237 2079 2800 ※UKT0J333MRD 22 5× 11 0.26 6.6 3 45 ※UKT1A220MDD 33 5× 11 0.26 9.9 3.3 58 ※UKT1A330MDD 47 5× 11 0.26 14.1 68 ※UKT1A470MDD 100 5× 11 0.26 30 10 105 ※UKT1A101MDD 220 6.3× 11 0.26 66 22 175 4.7 ※UKT1A221MED 330 8× 11.5 0.26 99 33 240 　UKT1A331MPD 470 8× 11.5 0.26 141 47 280 　UKT1A471MPD 1000 10× 16 0.26 300 100 500 　UKT1A102MPD 2200 12.5×20 0.28 660 220 810 　UKT1A222MHD 3300 12.5×25 0.30 990 330 1050 　UKT1A332MHD 4700 12.5×35.5 0.32 1410 470 1300 　UKT1A472MHD 6800 12.5×40 0.36 2040 680 1570 　UKT1A682MHD 10000 16× 35.5 0.44 3000 1000 1890 　UKT1A103MHD 15000 18× 40 0.54 4500 1500 2400 　UKT1A153MHD 22000 22× 40 0.68 6600 2200 2650 ※UKT1A223MRD 33000 25× 50 0.90 9900 3300 2880 ※UKT1A333MRD 10 5× 11 0.22 4.8 3 35 ※UKT1C100MDD 22 5× 11 0.22 10.56 3.52 54 ※UKT1C220MDD 33 5× 11 0.22 15.84 5.28 65 ※UKT1C330MDD 47 5× 11 0.22 22.56 7.52 79 ※UKT1C470MDD 100 5× 11 0.22 48 16 115 ※UKT1C101MDD 220 6.3× 11 0.22 105.6 35.2 190 ※UKT1C221MED 8× 11.5 0.22 158.4 52.8 265 　UKT1C331MPD 8× 11.5 330 16 （1C） Rated Ripple （mArms） （105℃/120Hz） tan δ 10000 10 （1A） Leakage Current （µA） Case Size φD×L（mm） 0.22 225.6 1000 470 10× 16 0.22 480 2200 12.5 × 20 0.24 1056 3300 12.5×30.5 0.26 1584 4700 12.5×35.5 0.28 2256 6800 16× 30.5 0.32 10000 18× 35.5 15000 22000 75.2 315 　UKT1C471MPD 560 　UKT1C102MPD 352 920 　UKT1C222MHD 528 1270 　UKT1C332MHD 752 1480 　UKT1C472MHD 3264 1088 1780 　UKT1C682MHD 0.40 4800 1600 2060 　UKT1C103MHD 20× 40 0.50 7200 2400 2430 ※UKT1C153MRD 22×50 0.64 10560 3520 3000 ※UKT1C223MRD 160 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UKT Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 4.7 25 （1E） 50 （1H） tan δ Leakage Current （µA） at 20℃ after at 20℃ after 1 minute 2 minutes Rated Ripple （mArms） （105℃/120Hz） Part Number 5× 11 0.18 4 3 25 ※UKT1E4R7MDD 10 5× 11 0.18 7.5 3 36 ※UKT1E100MDD 22 5× 11 0.18 16.5 5.5 58 ※UKT1E220MDD 33 5× 11 0.18 24.75 8.25 68 ※UKT1E330MDD 47 5× 11 0.18 35.25 11.75 83 ※UKT1E470MDD 100 6.3× 11 0.18 75 25 140 ※UKT1E101MED 220 8× 11.5 0.18 165 55 240 　UKT1E221MPD 330 8× 11.5 0.18 247.5 82.5 290 　UKT1E331MPD 470 　UKT1E471MPD 10× 12.5 0.18 352.5 117.5 380 1000 10× 20 0.18 750 250 680 　UKT1E102MPD 2200 12.5× 30.5 0.20 1650 550 1200 　UKT1E222MHD 3300 12.5× 35.5 0.22 2475 825 1400 　UKT1E332MHD 4700 16× 30.5 0.24 3525 1175 1710 　UKT1E472MHD 6800 18× 35.5 0.28 5100 1700 2040 　UKT1E682MHD 10000 20× 40 0.36 7500 2500 2150 ※UKT1E103MRD 15000 22× 50 0.46 11250 3750 2750 ※UKT1E153MRD 5× 11 0.16 3 28 ※UKT1V4R7MDD 10 5× 11 0.16 10.5 3.5 41 ※UKT1V100MDD 22 5× 11 0.16 23.1 7.7 61 ※UKT1V220MDD 33 5× 11 0.16 34.65 11.55 75 ※UKT1V330MDD 49.35 16.45 4.7 35 （1V） Case Size φD×L（mm） 4.935 47 5× 11 0.16 93 ※UKT1V470MDD 100 6.3× 11 0.16 105 35 150 ※UKT1V101MED 77 260 　UKT1V221MPD 115.5 350 　UKT1V331MPD 220 8× 11.5 0.16 231 330 10× 12.5 0.16 346.5 470 10× 16 0.16 164.5 460 　UKT1V471MPD 1000 12.5× 25 0.16 1050 493.5 350 860 　UKT1V102MHD 2200 12.5× 40 0.18 2310 770 1260 　UKT1V222MHD 3300 16× 35.5 0.20 3465 1155 1610 　UKT1V332MHD 4700 18× 35.5 0.22 4935 1645 1910 　UKT1V472MHD 6800 20× 40 0.26 7140 2380 2150 ※UKT1V682MRD 10000 22× 50 0.34 10500 3500 2650 ※UKT1V103MRD 2.2 5× 11 0.14 4 3 20 ※UKT1H2R2MDD 3.3 5× 11 0.14 4.95 3 25 ※UKT1H3R3MDD 4.7 5× 11 0.14 7.05 3 30 ※UKT1H4R7MDD 10 5× 11 0.14 15 5 46 ※UKT1H100MDD 22 5× 11 0.14 33 11 68 ※UKT1H220MDD 33 5× 11 0.14 49.5 16.5 90 ※UKT1H330MDD 47 6.3× 11 0.14 70.5 23.5 115 ※UKT1H470MED 50 190 　UKT1H101MPD 100 8× 11.5 0.14 150 220 10× 12.5 0.14 330 110 300 　UKT1H221MPD 330 10×16 0.14 495 165 410 　UKT1H331MPD 470 12.5 × 20 0.14 705 235 530 　UKT1H471MHD 1000 12.5×30.5 0.14 1500 500 1040 　UKT1H102MHD 2200 16× 35.5 0.16 3300 1100 1470 　UKT1H222MHD 3300 18× 35.5 0.18 4950 1650 1770 　UKT1H332MHD 4700 20× 40 0.20 7050 2350 2100 ※UKT1H472MRD 6800 22× 50 0.24 10200 3400 2500 ※UKT1H682MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L