UKW1C471MPD

ALUMINUM ELECTROLYTIC CAPACITORS UKW Standard, For Audio Equipment Realization of a harmonious balance of sound quality, made possible by the development of new electrolyte. Most suited for AV equipment like DVD. Compliant to the RoHS directive (2011/65/EU). UKW High Sound Quality UFW Specifications Item Performance Characteristics –40 to +85°C 6.3 to 100V 2.2 to 33000µF ± 20% at 120Hz, 20°C Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03 CV or 4 (µA) , whichever is greater. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. Leakage Current Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 Measurement frequency : 120Hz at 20°C 100 0.08 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz 6.3 5 12 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) Z– 40°C / Z+20°C Sleeve (P.E.T.) 10 4 10 φd 35 2 4 50 2 3 63 2 3 100 2 3 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After sroring the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with gold color letter on black sleeve. MAX. P ±0.5 Capacitance change tan δ Leakage current Type numbering system (Example : 10V 1000µF) L+ 15MIN MAX. φD 5 6.3 8 10 12.5 P 2.0 2.5 3.5 5.0 5.0 φd 0.5 0.5 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.5 L+ 15MIN MAX. 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 22000 33000 4 18 7.5 0.8 0.5 20 10 1.0 0.5 6.3 8 3.5 0.6 0.5 10 5.0 0.6 0.5 12.5 16 0J 5.0 7.5 0.6 0.8 0.5 0.5 6.3 × 11 6.3 × 11 8 × 11.5 10 × 20 10 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 35.5 18 × 40 22 × 50 Frequency 2.2 to 47 100 to 470 1000 to 33000 6 7 8 9 10 11 Configuration Rated capacitance (1000µF) Rated voltage (10V) Series name Type 18 7.5 0.8 0.5 20 10 1.0 0.5 22 10 1.0 1.0 (mm) 10 25 1A 12.5 1.0 1.0 16 1C 25 1E 35 1V 50 1H 5 × 11 5 × 11 6.3 × 11 10 × 12.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 35.5 18 × 35.5 20 × 40 22 × 50 25 × 50 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 105 5 × 11 120 6.3 × 11 200 8 × 11.5 370 10 × 12.5 470 10 × 16 630 12.5 × 20 1100 12.5 × 25 1800 16 × 35.5 2220 18 × 35.5 2490 20 × 40 3000 22 × 50 3700 25 × 50 4300 4R7< 20) 1.5 (φD (φD 100 20) 2.0 220 330 470 101 221 331 471 102 222 332 472 682 103 153 223 333 5 Capacitance tolerance (±20%) (mm) 22 25 10 12.5 1.0 1.0 1.0 1.0 265 310 530 980 1170 1350 1600 2000 2550 3200 3900 5 × 11 6.3 × 11 6.3 × 11 6.3 × 11 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 35.5 18 × 35.5 20 × 40 22 × 50 145 230 270 330 630 1050 1420 1800 2150 2500 2720 3700 4500 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 12.5 × 20 12.5 × 25 16 × 25 16 × 35.5 18 × 35.5 20 × 40 22 × 50 25 × 50 155 250 360 420 770 1250 1700 2100 2500 2640 3400 4200 4800 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 31.5 18 × 35.5 20 × 40 22 × 50 25 × 50 Frequency coefficient of rated ripple current Cap.(µF) 3 φD Pb-free leadwire Pb-free PET sleeve 5 6.3 8 ·10 12.5 to 18 20 to 25 DD ED PD HD RD • Please refer to page 20 about the end seal configuration. V φD 5 Code 6.3 P 2.0 2.5 2.2 2R2 φd 0.5 0.5 0.5 3.3 0.5 3R3 2 U KW 1 A 1 0 2 M PD (φD < 20) 1.5 (φD 20) 2.0 4MIN Dimensions Cap. (µF) 16 7.5 0.8 0.5 1 4MIN MAX. φd P ±0.5 Pressure relief vent (φ 6.3up) φD+ Pressure relief vent (φ6.3up) Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value φD+ Sleeve (P.E.T.) 25 2 5 Endurance Radial Lead Type 16 3 8 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 115 185 320 420 530 950 1550 1950 2360 2590 3000 3800 4500 63 1J 23 35 40 65 95 120 150 250 410 570 760 1300 2090 2360 2900 3500 4000 5 × 11 5 × 11 6.3 × 11 6.3 × 11 10 × 12.5 10 × 16 10 × 20 12.5 × 20 16 × 25 18 × 35.5 20 × 40 22 × 50 25 × 50 100 2A 70 100 140 165 300 470 650 880 1300 2200 2700 3400 3500 5 × 11 5 × 11 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 20 12.5 × 25 12.5 × 25 16 × 25 18 × 40 22 × 50 25 × 50 30 40 45 75 120 160 210 350 600 750 1000 1370 2400 2900 Case size φD × L (mm) Rated ripple Rated ripple current (mArms) at 85°C 120Hz 10kHz or more 2.00 1.50 1.15 276 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100H