UKW1E471MPD1TD

ALUMINUM ELECTROLYTIC CAPACITORS UKW Standard, For Audio Equipment Realization of a harmonious balance of sound quality, made possible by the development of new electrolyte. Most suited for AV equipment. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UKW High Sound Quality UFW Specifications Item Performance Characteristics –40 to +85°C 6.3 to 100V 2.2 to 33000µF ± 20% at 120Hz, 20°C Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03 CV or 4 (µA) , whichever is greater. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. Leakage Current Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 Measurement frequency : 120Hz at 20°C 100 0.08 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz 6.3 5 12 Rated voltage (V) Impedance ratio Z– 25°C / Z+20°C Stability at Low Temperature (MAX.) Z– 40°C / Z+20°C 10 4 10 16 3 8 25 2 5 35 2 4 50 2 3 63 2 3 100 2 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After sroring the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with gold color letter on black sleeve. Radial Lead Type Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Type numbering system (Example : 10V 1000µF) Sleeve (P.E.T.) 1 φd 2 3 4 5 6 7 8 9 10 11 φD+ P ±0.5 MAX. U KW 1 A 1 0 2 M PD Configuration Capacitance tolerance (±20%) Rated capacitance (1000µF) Rated voltage (10V) Pressure relief vent (φ6.3up) Series name Type L+ 15MIN MAX. φD 5 6.3 8 10 12.5 P 2.0 2.5 3.5 5.0 5.0 φd 0.5 0.5 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.5 16 7.5 0.8 0.5 18 7.5 0.8 0.5 20 10 1.0 0.5 φD Pb-free leadwire Pb-free PET sleeve 5 6.3 8 ·10 12.5 to 18 20 to 25 DD ED PD HD RD 4MIN 22 10 1.0 1.0 (mm) 25 12.5 1.0 1.0 (φD < 20) 1.5 (φD 20) 2.0 Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Frequency coefficient of rated ripple current Cap.(µF) Frequency 2.2 to 47 100 to 470 1000 to 33000 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 10kHz or more 2.00 1.50 1.15 Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UKW Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） at 20℃ after at 20℃ after 1 minute 2 minutes Rated Ripple （mArms） （85℃/120Hz） Part Number 6.3× 11 0.28 62.37 20.79 265 UKW0J331MED 6.3× 11 0.28 88.83 29.61 310 UKW0J471MED 0.28 189 63 530 UKW0J102MPD 10×20 0.30 415.8 138.6 980 UKW0J222MPD 3300 10×20 0.32 623.7 207.9 1170 UKW0J332MPD 4700 12.5×20 0.34 888.3 296.1 1350 UKW0J472MHD 8×11.5 6800 12.5×25 0.38 1285.2 428.4 1600 UKW0J682MHD 10000 16× 25 0.46 1890 630 2000 UKW0J103MHD 15000 16× 35.5 0.56 2835 945 2550 UKW0J153MHD 22000 18× 40 0.70 4158 1386 3200 UKW0J223MHD 33000 22× 50 0.92 6237 2079 3900 UKW0J333MRD 100 5×11 0.24 30 10 145 UKW1A101MDD 220 6.3× 11 0.24 66 22 230 UKW1A221MED 330 6.3× 11 0.24 99 33 270 UKW1A331MED 470 6.3× 11 0.24 141 47 330 UKW1A471MED 10× 12.5 0.24 300 100 630 UKW1A102MPD 2200 10× 20 0.26 660 220 1050 UKW1A222MPD 3300 12.5× 20 0.28 990 330 1420 UKW1A332MHD 4700 12.5× 25 0.30 1410 470 1800 UKW1A472MHD 6800 16× 25 0.34 2040 680 2150 UKW1A682MHD 10000 16× 35.5 0.42 3000 1000 2500 UKW1A103MHD 15000 18× 35.5 0.52 4500 1500 2720 UKW1A153MHD 22000 20× 40 0.66 6600 2200 3700 UKW1A223MRD 33000 22× 50 0.88 9900 3300 4500 UKW1A333MRD 100 5× 11 0.20 48 16 155 UKW1C101MDD 220 6.3× 11 0.20 105.6 35.2 250 UKW1C221MED 1000 16 （1C） Leakage Current （µA） 330 2200 10 （1A） tan δ 470 1000 6.3 （0J） Case Size φD×L（mm） 330 8× 11.5 0.20 158.4 52.8 360 UKW1C331MPD 470 8× 11.5 0.20 225.6 75.2 420 UKW1C471MPD 1000 10× 16 0.20 480 160 770 UKW1C102MPD 2200 12.5× 20 0.22 1056 352 1250 UKW1C222MHD 3300 12.5× 25 0.24 1584 528 1700 UKW1C332MHD 4700 16× 25 0.26 2256 752 2100 UKW1C472MHD 6800 16× 35.5 0.30 3264 1088 2500 UKW1C682MHD 10000 18× 35.5 0.38 4800 1600 2640 UKW1C103MHD 15000 20× 40 0.48 7200 2400 3400 UKW1C153MRD 22000 22× 50 0.62 10560 3520 4200 UKW1C223MRD 33000 25× 50 0.84 15840 5280 4800 UKW1C333MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UKW Dimensions Rated Voltage （V） （code） 25 （1E） 35 （1V） Rated Capacitance （µF） tan δ 47 5× 11 0.16 35.25 100 6.3× 11 0.16 75 Rated Ripple （mArms） （85℃/120Hz） Part Number 11.75 115 UKW1E470MDD 25 185 UKW1E101MED at 20℃ after at 20℃ after 1 minute 2 minutes 220 8× 11.5 0.16 165 55 320 UKW1E221MPD 330 10× 12.5 0.16 247.5 82.5 420 UKW1E331MPD 470 10× 12.5 0.16 352.5 117.5 530 UKW1E471MPD 1000 10× 20 0.16 750 250 950 UKW1E102MPD 2200 12.5× 25 0.18 1650 550 1550 UKW1E222MHD 3300 16× 25 0.20 2475 825 1950 UKW1E332MHD 4700 16× 31.5 0.22 3525 1175 2360 UKW1E472MHD 6800 18× 35.5 0.26 5100 1700 2590 UKW1E682MHD 10000 20× 40 0.34 7500 2500 3000 UKW1E103MRD 15000 22× 50 0.44 11250 3750 3800 UKW1E153MRD 22000 25× 50 0.58 16500 5500 33 5× 11 0.14 4500 UKW1E223MRD 34.65 11.55 105 UKW1V330MDD 49.35 16.45 120 UKW1V470MDD 35 200 UKW1V101MED 47 5× 11 0.14 100 6.3× 11 0.14 105 220 10× 12.5 0.14 231 77 370 UKW1V221MPD 330 10× 12.5 0.14 346.5 115.5 470 UKW1V331MPD 493.5 164.5 470 10× 16 0.14 1000 12.5× 20 0.14 1050 630 UKW1V471MPD 350 1100 UKW1V102MHD 2200 16× 25 0.16 3300 16× 35.5 0.18 2310 770 1800 UKW1V222MHD 3465 1155 2220 UKW1V332MHD 4700 18× 35.5 6800 20× 40 0.20 4935 1645 2490 UKW1V472MHD 0.24 7140 2380 3000 UKW1V682MRD 10000 15000 22× 50 0.32 10500 3500 3700 UKW1V103MRD 25× 50 0.42 15750 5250 4300 UKW1V153MRD 2.2 5× 11 0.12 4 3 23 UKW1H2R2MDD 3.3 5× 11 0.12 4.95 3 35 UKW1H3R3MDD 7.05 4.7 50 （1H） Leakage Current （µA） Case Size φD×L（mm） 5× 11 0.12 3 40 UKW1H4R7MDD 10 5× 11 0.12 15 5 65 UKW1H100MDD 22 5× 11 0.12 33 11 95 UKW1H220MDD 33 5× 11 0.12 49.5 16.5 120 UKW1H330MDD 47 6.3× 11 0.12 70.5 23.5 150 UKW1H470MED 100 8× 11.5 0.12 150 50 250 UKW1H101MPD 220 10× 12.5 0.12 330 110 410 UKW1H221MPD 330 10× 16 0.12 495 165 570 UKW1H331MPD 470 12.5× 20 0.12 705 235 760 UKW1H471MHD 1000 12.5× 25 0.12 1500 500 1300 UKW1H102MHD 2200 16× 35.5 0.14 3300 1100 2090 UKW1H222MHD 3300 18× 35.5 0.16 4950 1650 2360 UKW1H332MHD 4700 20× 40 0.18 7050 2350 2900 UKW1H472MRD 6800 22 × 50 0.22 10200 3400 3500 UKW1H682MRD 10000 25×50 0.30 15000 5000 4000 UKW1H103MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UKW Dimensions Rated Voltage （V） （code） 63 （1J） 100 （2A） Leakage Current （µA） Rated Ripple （mArms） （85℃/120Hz） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 10 5× 11 0.10 18.9 6.3 70 UKW1J100MDD 22 5× 11 0.10 41.58 13.86 100 UKW1J220MDD 33 6.3× 11 0.10 62.37 20.79 140 UKW1J330MED 47 6.3× 11 0.10 88.83 29.61 165 UKW1J470MED 100 10× 12.5 0.10 189 63 300 UKW1J101MPD 220 10× 16 0.10 415.8 138.6 470 UKW1J221MPD 330 10× 20 0.10 623.7 207.9 650 UKW1J331MPD 470 12.5× 20 0.10 888.3 296.1 880 UKW1J471MHD at 20℃ after at 20℃ after 1 minute 2 minutes Part Number 1000 16× 25 0.10 1890 630 1300 UKW1J102MHD 2200 18× 35.5 0.12 4158 1386 2200 UKW1J222MHD 3300 20× 40 0.14 6237 2079 2700 UKW1J332MRD 4700 22× 50 0.16 8883 2961 3400 UKW1J472MRD 6800 12852 25× 50 0.20 2.2 5× 11 0.08 4284 3500 UKW1J682MRD 6.6 3 30 UKW2A2R2MDD 3.3 5× 11 4.7 5×11 0.08 9.9 3.3 40 UKW2A3R3MDD 0.08 14.1 4.7 45 UKW2A4R7MDD 10 22 6.3×11 0.08 30 10 75 UKW2A100MED 6.3× 11 0.08 66 22 120 UKW2A220MED 33 8× 11.5 0.08 99 33 160 UKW2A330MPD 47 10× 12.5 0.08 141 47 210 UKW2A470MPD 100 10× 20 0.08 300 100 350 UKW2A101MPD 220 12.5× 25 0.08 660 220 600 UKW2A221MHD 330 12.5× 25 0.08 990 330 750 UKW2A331MHD 470 16×25 0.08 1410 470 1000 UKW2A471MHD 1000 18× 40 0.08 3000 1000 1370 UKW2A102MHD 2200 22× 50 0.10 6600 2200 2400 UKW2A222MRD 3300 25× 50 0.12 9900 3300 2900 UKW2A332MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K