UKW1J100MDD

ALUMINUM ELECTROLYTIC CAPACITORS UKW Standard, For Audio Equipment Realization of a harmonious balance of sound quality, made possible by the development of new electrolyte. Most suited for AV equipment. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UKW High Sound Quality UFW Specifications Item Performance Characteristics –40 to +85°C 10 to 100V 33 to 15000µF ± 20% at 120Hz, 20°C Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03 CV (µA) . After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV (µA) . Leakage Current ※ Rated voltage (V) tan δ (max.) Tangent of loss angle (tan δ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 Measurement frequency : 120Hz at 20°C 100 0.08 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz 6.3 5 12 Rated voltage (V) Impedance ratio Z(–25°C) / Z(+20°C) (max.) Z(–40°C) / Z(+20°C) Stability at Low Temperature 10 4 10 16 3 8 25 2 5 35 2 4 50 2 3 63 2 3 100 2 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After sroring the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with gold color letter on black sleeve. Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 10V 1000µF) Sleeve (PET) 1 φd 2 3 4 5 6 7 8 9 10 11 P±0.5 φD+ 0.5max. U KW 1 A 1 0 2 M PD Configuration Capacitance tolerance (±20%) Rated capacitance (1000µF) Rated voltage (10V) φD Pb-free leadwire Pb-free PET sleeve 8 ·10 12.5 to 18 PD HD Series name Pressure relief vent Type L ±1.5 15min. 4min. (mm) φD P φd 8 3.5 0.6 10 12.5 16 5.0 5.0 7.5 0.6 0.6 0.8 18 7.5 0.8  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Frequency coefficient of rated ripple current Cap.(µF) Frequency 33 to 47 100 to 470 1000 to 15000 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 10kHz or more 2.00 1.50 1.15 Dimension table in next page. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS UKW Dimensions Rated Voltage （V） （code） 10 （1A） Rated Capacitance （µF） 25 （1E） 35 （1V） Rated Ripple （mArms） （85℃/120Hz） tan δ 1000 10× 12.5 0.24 300 100 630 　UKW1A102MPD 2200 10×20 0.26 660 220 1050 　UKW1A222MPD at 20℃ after at 20℃ after 1 minute 2 minutes Part Number 3300 12.5× 20 0.28 990 330 1420 　UKW1A332MHD 4700 12.5× 25 0.30 1410 470 1800 　UKW1A472MHD 6800 16× 25 0.34 2040 680 2150 　UKW1A682MHD 10000 16× 35.5 0.42 3000 1000 2500 　UKW1A103MHD 15000 18× 35.5 0.52 4500 1500 330 8× 11.5 0.20 158.4 8× 11.5 470 16 （1C） Leakage Current （µA） Case Size φD×L（mm） 2720 　UKW1A153MHD 52.8 360 　UKW1C331MPD 75.2 0.20 225.6 420 　UKW1C471MPD 1000 10×16 0.20 480 160 770 　UKW1C102MPD 2200 12.5×20 0.22 1056 352 1250 　UKW1C222MHD 3300 12.5×25 0.24 1584 528 1700 　UKW1C332MHD 4700 16×25 0.26 2256 752 2100 　UKW1C472MHD 6800 16×35.5 0.30 3264 1088 2500 　UKW1C682MHD 10000 18× 35.5 0.38 4800 1600 2640 　UKW1C103MHD 220 8× 11.5 0.16 165 55 320 　UKW1E221MPD 330 10× 12.5 0.16 247.5 82.5 420 　UKW1E331MPD 470 10× 12.5 0.16 352.5 117.5 530 　UKW1E471MPD 1000 10× 20 0.16 750 250 950 　UKW1E102MPD 2200 12.5× 25 0.18 1650 550 1550 　UKW1E222MHD 3300 16× 25 0.20 2475 825 1950 　UKW1E332MHD 4700 16× 30.5 0.22 3525 1175 2360 　UKW1E472MHD 6800 18× 35.5 0.26 5100 1700 2590 　UKW1E682MHD 220 10× 12.5 0.14 231 77 370 　UKW1V221MPD 330 10×12.5 0.14 346.5 115.5 470 　UKW1V331MPD 470 10×16 0.14 493.5 164.5 630 　UKW1V471MPD 1000 12.5× 20 0.14 1050 350 1100 　UKW1V102MHD 2200 16× 25 0.16 2310 770 1800 　UKW1V222MHD 3300 16× 35.5 0.18 3465 1155 2220 　UKW1V332MHD 4700 18× 35.5 0.20 4935 1645 2490 　UKW1V472MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS UKW Dimensions Rated Voltage （V） （code） 50 （1H） 63 （1J） Rated Capacitance （µF） tan δ Leakage Current （µA） at 20℃ after at 20℃ after 1 minute 2 minutes Rated Ripple （mArms） （85℃/120Hz） Part Number 100 8× 11.5 0.12 150 50 250 　UKW1H101MPD 220 10× 12.5 0.12 330 110 410 　UKW1H221MPD 330 10× 16 0.12 495 165 570 　UKW1H331MPD 470 12.5×20 0.12 705 235 760 　UKW1H471MHD 1000 12.5×25 0.12 1500 500 1300 　UKW1H102MHD 2200 16× 35.5 0.14 3300 1100 2090 　UKW1H222MHD 3300 18× 35.5 0.16 4950 1650 2360 　UKW1H332MHD 100 10× 12.5 0.10 189 63 300 　UKW1J101MPD 220 10× 16 0.10 415.8 138.6 470 　UKW1J221MPD 330 10× 20 0.10 623.7 207.9 650 　UKW1J331MPD 888.3 296.1 470 12.5× 20 0.10 880 　UKW1J471MHD 1000 16× 25 0.10 1890 630 1300 　UKW1J102MHD 2200 18× 35.5 0.12 4158 1386 2200 　UKW1J222MHD 33 8× 11.5 0.08 99 33 160 　UKW2A330MPD 47 100 （2A） Case Size φD×L（mm） 10× 12.5 0.08 141 47 210 　UKW2A470MPD 100 10× 20 0.08 300 100 350 　UKW2A101MPD 220 12.5×25 0.08 660 220 600 　UKW2A221MHD 330 12.5×25 0.08 990 330 750 　UKW2A331MHD 470 16× 25 0.08 1410 470 1000 　UKW2A471MHD 1000 18× 40 0.08 3000 1000 1370 　UKW2A102MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100M