UKZ1H102MHM

ALUMINUM ELECTROLYTIC CAPACITORS UKZ Premium Grade Type, For Audio Equipment Premium grade “nichicon MUSE” acoustic series. Ideally suited for first class audio equipment where qualitative and quantitative comfortableness is required. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UKZ High Grade UFG Specifications Performance Characteristics Item Category Temperature Range –40 to +85°C Rated Voltage Range 25 to 100V Rated Capacitance Range 10 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current ※ After 1 minute's application of rated voltage at 20°C, leakage current is 0.01CV or less. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) 25 0.12 Rated voltage (V) tan δ (max.) 50 0.08 100 0.07 Measurement frequency : 120Hz Stability at Low Temperature 25 2 4 Rated voltage (V) Impedance ratio (max.) Z(–25°C) / Z(+20°C) Z(–40°C) / Z(+20°C) 50 2 3 100 2 3 The specifications listed at right shall be met Capacitance change Within ±20% of the initial capacitance value when the capacitors are restored to 20°C after 150% or less than the initial specified value tan δ the rated voltage is applied for 1000 hours at Less than or equal to the initial specified value Leakage Current 85°C. After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with gold color letter on black sleeve. Endurance Shelf Life Marking ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type SleeveSleeve (PET) (PET) Type numbering system (Example : 25V 100µF) φ 0.8 tinned φ 0.8 tinned coppercopper wire wire 1 10 2 1 3 2 43 5 4 65 7 6 8 7 98 109 11 11 Pressure Pressure relief vent relief vent P±0.5 P±0.5 φD+0.5max. φD+0.5max. U KU ZK 1Z E1 1E 01 10 M1 PMMP M P φD φDCodeCode 8 · 10 8 · 10PM PM capacitance (100µF) RatedRated capacitance (100µF) 18 HM 12.5 to12.5 18 to HM voltage RatedRated voltage (25V)(25V) L ±1.5L ±1.5 15min.15min. 4min. 4min. (mm) (mm) φD Configuration Configuration Capacitance tolerance Capacitance tolerance (±20%) (±20%) SeriesSeries namename Type Type φD8 810 10 12.5 12.5 16 1618 18 P3.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Dimension table in next page. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UKZ Dimensions Rated Voltage （V） （code） 25 （1E） Rated Capacitance （µF） tan δ 33 8× 11.5 0.12 8.25 UKZ1E330MPM 47 ） Part Number 10× 12.5 0.12 11.75 UKZ1E470MPM 10× 16 0.12 25 UKZ1E101MPM 220 12.5× 20 0.12 55 UKZ1E221MHM 330 12.5× 25 0.12 82.5 UKZ1E331MHM 470 16× 25 0.12 117.5 UKZ1E471MHM 16× 35.5 0.12 250 UKZ1E102MHM 22 8× 11.5 0.08 11 UKZ1H220MPM 33 10× 12.5 0.08 16.5 UKZ1H330MPM 47 10× 16 0.08 23.5 UKZ1H470MPM 100 12.5× 20 0.08 50 UKZ1H101MHM 220 16× 25 0.08 110 UKZ1H221MHM 330 16× 30.5 0.08 165 UKZ1H331MHM 470 16× 35.5 0.08 235 UKZ1H471MHM 18× 40 0.08 500 UKZ1H102MHM 0.07 10 UKZ2A100MPM 10× 16 0.07 22 UKZ2A220MPM 33 10× 20 0.07 33 UKZ2A330MPM 47 12.5× 20 0.07 47 UKZ2A470MHM 100 16× 25 0.07 100 UKZ2A101MHM 220 16× 35.5 0.07 220 UKZ2A221MHM 330 18× 35.5 0.07 330 UKZ2A331MHM 1000 10 22 100 （2A） （ 100 1000 50 （1H） Leakage Current （µA） at 20℃ after 1 minute Case Size φD×L（mm） 8× 11.5 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L