ULD2C6R8MED1TD

ALUMINUM ELECTROLYTIC CAPACITORS ULD Miniature sized, Long Life Assurance Long Life product withstanding load life of 10000 to 20000 hours at +105°C. Suited for the power supply for LED lighting. Compliant to the RoHS directive (2011/65/EU, (EU)2015/863). UCY UHE ULD Long Life Specifications Item Performance Characteristics Category Temperature Range – 40 to +105°C Rated Voltage Range 10 to 450V Rated Capacitance Range 1 to 330µF Capacitance Tolerance ± 20% at 120Hz, 20°C Rated Voltage(V) 10 to 100 160 to 450 ---- After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3(µA), whichever is greater. After 1 minute's application of rated voltage at 20°C, CV < = 1000 : I= 0.1CV+40 (µA) or less. CV > 1000 : I= 0.04CV+100 (µA) or less. Leakage Current Measurement frequency : 120Hz at 20°C 10 0.45 Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 16 0.35 25 0.3 10 8 ---- 16 6 ---- 35 0.22 50 0.19 63 0.17 100 0.15 160 to 450 0.24 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio (MAX.) Z–25°C / Z+20°C Z–40°C / Z+20°C Rated Voltage(V) ---- Endurance Capacitance change tan δ Leakage current Shelf Life Marking Radial Lead Type Cap.(µF) 10 to 100 1 P±0.5 φD±0.5 MAX. (φ6.3up ) 15MIN 4MIN (mm) φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2E The specifications listed below shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 20000 hours (12000 hours for φ6.3×11L, 15000 hours for φ8×11.5L, φ10×12.5L) at 105°C, the peak voltage shall not exceed the rated 6.3 × 11 voltage. 6.3 × 11 36 6.3 × 11 6.3 × 11 6.8 6R8 8.2 8R2 U L 1 2 3 120 15 150 18 180 55 10 11 9 12 D 2 G 6 R 8 M PD T 70 8×9 100 12 6.35 × 611 7 8 4 8×9 62 8×9 66 8 × 11.5 80 10 × 9 8 × 11.5 92 10 × 9 95 88 22 220 27 270 33 330 φ D 47 470 5 6.3 68 • 680 8 10 10 × 12.5 Size code Configuration 10 × 16 113 Rated voltage (400V) Series name 10 × 16 149 Type 158 Pb-free leadwire Pb-free PET sleeve DD ED PD HD 12.5 to 18 10 × 12.5 Rated capacitance (6.8µF) 121 10 × 16 8 × 11.5 10 × 9 Capacitance tolerance (±20%) 10 × 12.5 10 × 12.5 8×9 8 × 11.5 Frequency coefficient of rated ripple current (160∼450V) Frequency coefficient of rated ripple current (10〜100V) 120Hz 1kHz 10kHz 100kHz Frequency Cap.(µF) 120Hz 1kHz 10kHz 100kHz or more 1 to 10µF 0.42 0.60 0.80 1.00 1 to 5.6µF 1.00 1.60 1.80 2.00 22 to 33µF 0.55 0.75 0.90 1.00 6.8 to 18µF 1.00 1.50 1.70 1.90 47 to 330µF 0.70 0.85 0.95 1.00 22 to 68µF 1.00 1.40 1.60 1.80 Frequency 250 2D 160 to 450 Configuration Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Cap.(µF) 2C 450 6 200 ---- 400 6 10 42 6.3 × 11 3.3for 10003R3 After storing the capacitors under no load at 105˚C hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. 3R9 3.9 Printed with white color letter on dark brown sleeve. 49 6.3 × 11 4R7 4.7 50 6.3 × 11 6.3 × 11 52 5R6 numbering system (Example : 400V 6.8µF) 5.6 Type 56 8×9 10 MAX. 010 160 to 250 160 3 8 2.2 Within ± 25%(10V to 100V) ± 30%(160V to2R2 450V) of the initial capacitance value 300% or less than the initial specified value 2R7 Less than or equal to the initial 2.7 specified value φd L+ Code 1R2 1.2 shall be The specifications listed below met when the capacitors are restored to 20˚C 1R5 1.5 current after D.C. bias plus rated ripple is applied for 10000 hours at 105˚C, the peak voltage shall not exceed the 1R8 1.8rated voltage. Sleeve (P.E.T.) Pressure relief vent 25· 35 50 to 100 3 4 V ------- Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS ULD Dimensions Rated Voltage （V） （code） 10 （1A） Rated Capacitance （µF） tan δ 100 5× 11 0.45 － 220 6.3× 11 0.45 － 330 16 （1C） － ULD1A101MDD 210 － ULD1A221MED 33 330 － ULD1A331MPD 130 － ULD1C470MDD － － 100 6.3× 11 0.35 － 16 210 － ULD1C101MED 150 6.3× 11 0.35 － 24 210 － ULD1C151MED 0.35 － 35.2 330 － ULD1C221MPD 43.2 8× 11.5 7.52 8× 11.5 0.35 － 330 － ULD1C271MPD 33 5× 11 0.30 － 8.25 130 － ULD1E330MDD 47 5× 11 0.30 － 11.75 130 － ULD1E470MDD 100 6.3× 11 0.30 － 25 210 － ULD1E101MED 8×11.5 0.30 － 37.5 330 － ULD1E151MPD 33 5× 11 0.22 － 11.55 130 － ULD1V330MDD 47 6.3× 11 0.22 － 16.45 210 － ULD1V470MED 8× 11.5 0.22 － 35 330 － ULD1V101MPD 1 5×11 0.19 － 3 25 － ULD1H010MDD 2.2 5× 11 0.19 － 3 35 － ULD1H2R2MDD 3.3 5× 11 0.19 － 3 70 － ULD1H3R3MDD 4.7 5× 11 0.19 － 3 80 － ULD1H4R7MDD 6.8 5× 11 0.19 － 3.4 80 － ULD1H6R8MDD 10 5× 11 0.19 － 5 90 － ULD1H100MDD 22 5× 11 0.19 － 11 135 － ULD1H220MDD 33 6.3× 11 0.19 － 16.5 190 － ULD1H330MED 47 6.3× 11 0.19 － 23.5 190 － ULD1H470MED 8× 11.5 0.19 － 50 270 － ULD1H101MPD 10 5× 11 0.17 － 6.3 80 － ULD1J100MDD 22 6.3× 11 0.17 － 13.86 170 － ULD1J220MED 33 6.3× 11 0.17 － 20.79 170 － ULD1J330MED 47 8× 11.5 0.17 － 29.61 240 － ULD1J470MPD 4.7 5× 11 0.15 － 4.7 70 － ULD2A4R7MDD 6.8 5× 11 0.15 － 6.8 70 － ULD2A6R8MDD 6.3× 11 0.15 － 10 150 － ULD2A100MED 0.15 － 22 230 － ULD2A220MPD 10 22 160 （2C） 130 22 0.35 100 100 （2A） 10 0.45 100 63 （1J） 105℃/ 120Hz 5× 11 150 50 （1H） Part Number 105℃/ 100kHz at 20℃ after at 20℃ after 1 minute 2 minutes 8× 11.5 270 35 （1V） Rated Ripple （mArms） 47 220 25 （1E） Leakage Current （µA） Case Size φD×L（mm） 8× 11.5 5.6 6.3× 11 0.24 129.6 － － 52 ULD2C5R6MED 6.8 6.3× 11 0.24 143.52 － － 55 ULD2C6R8MED 15 8× 11.5 0.24 196 － － 92 ULD2C150MPD 22 10× 12.5 0.24 240.8 － － 121 ULD2C220MPD 33 10× 16 0.24 311.2 － － 158 ULD2C330MPD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS ULD Dimensions Rated Voltage （V） （code） 200 （2D） 250 （2E） 400 （2G） 450 （2W） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Leakage Current （µA） at 20℃ after 1 minute Rated Ripple （mArms） （105℃/120Hz） Part Number （ ） 2.2 6.3× 11 0.24 84 36 ULD2D2R2MED 3.3 6.3× 11 0.24 106 42 ULD2D3R3MED 4.7 6.3× 11 0.24 134 49 ULD2D4R7MED 5.6 6.3× 11 0.24 144.8 50 ULD2D5R6MED 10 8× 11.5 0.24 180 80 ULD2D100MPD 18 10× 12.5 0.24 244 113 ULD2D180MPD 27 10× 16 0.24 316 149 ULD2D270MPD 1.8 6.3× 11 0.24 85 33 ULD2E1R8MED 2.2 6.3× 11 0.24 95 36 ULD2E2R2MED 3.3 6.3× 11 0.24 122.5 42 ULD2E3R3MED 5.6 8× 11.5 0.24 156 62 ULD2E5R6MPD 6.8 8× 11.5 0.24 168 68 ULD2E6R8MPD 10 10× 12.5 0.24 200 90 ULD2E100MPD 12 10× 12.5 0.24 220 97 ULD2E120MPD 18 10× 16 0.24 280 129 ULD2E180MPD 1 6.3× 11 0.24 80 24 ULD2G010MED 1.5 6.3× 11 0.24 100 29 ULD2G1R5MED 2.2 8× 11.5 0.24 128 40 ULD2G2R2MPD 2.7 8× 11.5 0.24 143.2 43 ULD2G2R7MPD 3.3 8× 11.5 0.24 152.8 47 ULD2G3R3MPD 3.9 10× 12.5 0.24 162.4 57 ULD2G3R9MPD 4.7 10× 12.5 0.24 175.2 61 ULD2G4R7MPD 5.6 10× 12.5 0.24 189.6 64 ULD2G5R6MPD 6.8 10×16 0.24 208.8 85 ULD2G6R8MPD 8.2 10× 16 0.24 231.2 88 ULD2G8R2MPD 5.6 10× 16 0.24 200.8 58 ULD2W5R6MPD 6.8 10× 16 0.24 222.4 62 ULD2W6R8MPD 8.2 10× 20 0.24 247.6 88 ULD2W8R2MPD 10 10× 20 0.24 280 92 ULD2W100MPD 15 12.5× 20 0.24 370 140 ULD2W150MHD 22 12.5× 25 0.24 496 240 ULD2W220MHD 22 16× 20 0.24 496 292 ULD2W220MHD6 27 16× 20 0.24 586 305 ULD2W270MHD 33 16× 25 0.24 694 392 ULD2W330MHD 33 18× 20 0.24 694 312 ULD2W330MHD6 47 18× 25 0.24 946 480 ULD2W470MHD 68 18× 31.5 0.24 1324 520 ULD2W680MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K