ULD2G1R2MPD1TD

ALUMINUM ELECTROLYTIC CAPACITORS ULD Miniature sized, Long Life Assurance Long Life product withstanding load life of 10000 to 20000 hours at +105°C. Suited for the power supply for LED lighting. Compliant to the RoHS directive (2011/65/EU, (EU)2015/863). UCY UHE ULD Long Life Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. Specifications Item Performance Characteristics Category Temperature Range – 40 to +105°C Rated Voltage Range 10 to 450V Rated Capacitance Range 1 to 330µF Capacitance Tolerance ± 20% at 120Hz, 20°C Rated Voltage(V) 10 to 100 160 to 450 ---- After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3(μA), whichever is greater. After 1 minute's application of rated voltage at 20°C, CV < = 1000 : I= 0.1CV+40 (µA) or less. CV > 1000 : I= 0.04CV+100 (µA) or less. Leakage Current ※ Measurement frequency : 120Hz at 20°C 10 0.45 Rated voltage (V) tan δ (max.) Tangent of loss angle (tan δ) 16 0.35 25 0.3 35 0.22 50 0.19 63 0.17 100 0.15 160 to 450 0.24 Measurement frequency : 120Hz 10 8 ---- Rated voltage (V) Stability at Low Temperature Impedance ratio (max.) Z(–25°C) / Z(+20°C) Z(–40°C) / Z(+20°C) Rated Voltage(V) ---- Endurance 16 6 Cap.(µF) ---- 010 10 to 1001 1R2 1.2 The specifications listed below shall be met when the capacitors are restored to 20˚C 1R5 1.5 after D.C. bias plus rated ripple current is applied for 10000 hours at1.8 105˚C, the1R8 peak voltage shall not exceed the rated voltage. 2.2 Capacitance change tan δ Leakage current 2R2 160 to 250 160 3 2C 8 450 200 6 2D ---- 400 6 10 250 2E 160 to 450 The specifications listed below shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 20000 hours (12000 hours for φ6.3×11L, 15000 hours for φ8×11.5L, φ10×12.5L) 6.3 × 11 at 105°C, the peak voltage shall not exceed the rated 6.3 × 11 voltage. 36 6.3 × 11 Within ± 25%(10V to 100V) ± 30%(160V to 450V) of the initial capacitance value 2.7 value2R7 300% or less than the initial specified Less than or equal to the initial specified value 42 6.3 × 11 3R3 3.3 After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values 3R9 for the endurance characteristics listed above. 3.9 Shelf Life Printed with white color letter on dark brown sleeve. 4.7 Marking 5.6 Radial Lead Type φd P±0.5 φD±0.5max. 15min. (mm) φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.5 1.5 2.0 2.0 2.0 2.0 2.0 47 470 5 6.3 68 680 8 • 10 10 × 16 149 Type 158 Pb-free leadwire Pb-free PET sleeve DD ED PD HD 12.5 to 18 120Hz 1kHz 10kHz 100kHz Frequency Cap.(µF) 120Hz 1kHz 10kHz 100kHz or more 1 to 10µF 0.42 0.60 0.80 1.00 1 to 5.6µF 1.00 1.60 1.80 2.00 22 to 33µF 0.55 0.75 0.90 1.00 6.8 to 18µF 1.00 1.50 1.70 1.90 47 to 330µF 0.70 0.85 0.95 1.00 22 to 68µF 1.00 1.40 1.60 1.80 Frequency 5 330 φ D 10 × 16 Frequency coefficient of rated ripple current (160∼450V) Frequency coefficient of rated ripple current (10〜100V) 8×9 220 Configuration  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. 50 33 18 4min. 49 6.3 × 11 270 12 15 L± 6.3 × 11 ※5R6 I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V)8 × 11.5 56 8×9 52 27 10 Pressure relief vent 6.3 × 11 Dimension table in next page. CAT.8100L 3 4 22 8.2 (φ6.3up ) 4R7 3 6.3 × 11 Type numbering system (Example : 400V 6.8µF) 62 6R8 8×9 55 8 × 11.5 6.3 × 11 1 2 3 4 5 6 7 8 9 10 11 12 66 8R2 8×9 10 × 9 U L D 2 G 6 R 8 M PD T 80 70 8×9 8 × 11.5 100 10 × 12.5 Size code 120 88 10 × 12.5 10 × 9 Configuration 92 8 × 11.5 Capacitance tolerance (±20%) 150 95 10 × 9 Rated capacitance (6.8µF) 10 × 16 180 10 × 12.5 113 Rated voltage (400V) 121 10 × 12.5 Series name 6.8 Sleeve (PET) Cap.(µF) 25· 35 50 to 100 V 3 4 -------Code 6 6 7 9 9 1 ALUMINUM ELECTROLYTIC CAPACITORS ULD Dimensions Rated Voltage （V） （code） 10 （1A） Rated Capacitance （µF） tan δ 100 5× 11 0.45 － 220 6.3× 11 0.45 － 330 16 （1C） 25 （1E） 130 － ※ULD1A101MDD 22 210 － ※ULD1A221MED 33 330 － 　ULD1A331MPD 130 － ※ULD1C470MDD － 0.35 － 100 6.3× 11 0.35 － 16 210 － ※ULD1C101MED 150 6.3× 11 0.35 － 24 210 － ※ULD1C151MED 7.52 220 8× 11.5 0.35 － 35.2 330 － 　ULD1C221MPD 270 43.2 8× 11.5 0.35 － 330 － 　ULD1C271MPD 33 5× 11 0.30 － 8.25 130 － ※ULD1E330MDD 47 5× 11 0.30 － 11.75 130 － ※ULD1E470MDD 100 6.3× 11 0.30 － 25 210 － ※ULD1E101MED 8× 11.5 0.30 － 37.5 330 － 　ULD1E151MPD 33 5× 11 0.22 － 11.55 130 － ※ULD1V330MDD 47 6.3× 11 0.22 － 16.45 210 － ※ULD1V470MED 8× 11.5 0.22 － 35 330 － 　ULD1V101MPD 1 5× 11 0.19 － 3 25 － ※ULD1H010MDD 2.2 5× 11 0.19 － 3 35 － ※ULD1H2R2MDD 3.3 5× 11 0.19 － 3 70 － ※ULD1H3R3MDD 4.7 5× 11 0.19 － 3 80 － ※ULD1H4R7MDD 6.8 5× 11 0.19 － 3.4 80 － ※ULD1H6R8MDD 10 5× 11 0.19 － 5 90 － ※ULD1H100MDD 22 5× 11 0.19 － 11 135 － ※ULD1H220MDD 33 6.3× 11 0.19 － 16.5 190 － ※ULD1H330MED 47 6.3× 11 0.19 － 23.5 190 － ※ULD1H470MED 8× 11.5 0.19 － 50 270 － 　ULD1H101MPD 10 5× 11 0.17 － 6.3 80 － ※ULD1J100MDD 22 6.3× 11 0.17 － 13.86 170 － ※ULD1J220MED 33 6.3× 11 0.17 － 20.79 170 － ※ULD1J330MED 8× 11.5 0.17 － 29.61 240 － 　ULD1J470MPD 4.7 5× 11 0.15 － 4.7 70 － ※ULD2A4R7MDD 6.8 5× 11 0.15 － 6.8 70 － ※ULD2A6R8MDD 6.3× 11 0.15 － 10 150 － ※ULD2A100MED 0.15 － 22 230 － 　ULD2A220MPD 10 22 160 （2C） 10 0.45 47 100 （2A） 105℃/ 120Hz 5× 11 100 63 （1J） Part Number 105℃/ 100kHz at 20℃ after at 20℃ after 1 minute 2 minutes 8× 11.5 100 50 （1H） Rated Ripple （mArms） 47 150 35 （1V） Leakage Current （µA） Case Size φD×L（mm） 8× 11.5 5.6 6.3× 11 0.24 129.6 － － 52 ※ULD2C5R6MED 6.8 6.3× 11 ※ULD2C6R8MED 0.24 143.52 － － 55 15 8× 11.5 0.24 196 － － 92 　ULD2C150MPD 22 10× 12.5 0.24 240.8 － － 121 　ULD2C220MPD 33 10× 16 0.24 311.2 － － 158 　ULD2C330MPD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS ULD Dimensions Rated Voltage （V） （code） 200 （2D） 250 （2E） 400 （2G） 450 （2W） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Leakage Current （µA） at 20℃ after 1 minute Rated Ripple （mArms） （105℃/120Hz） Part Number （ ） 2.2 6.3× 11 0.24 84 36 ※ULD2D2R2MED 3.3 6.3× 11 0.24 106 42 ※ULD2D3R3MED 4.7 6.3× 11 0.24 134 49 ※ULD2D4R7MED 5.6 6.3× 11 0.24 144.8 50 ※ULD2D5R6MED 10 8× 11.5 0.24 180 80 　ULD2D100MPD 18 10× 12.5 0.24 244 113 　ULD2D180MPD 27 10× 16 0.24 316 149 　ULD2D270MPD 1.8 6.3× 11 0.24 85 33 ※ULD2E1R8MED 2.2 6.3× 11 0.24 95 36 ※ULD2E2R2MED 3.3 6.3× 11 0.24 122.5 42 ※ULD2E3R3MED 5.6 8× 11.5 0.24 156 62 　ULD2E5R6MPD 6.8 8× 11.5 0.24 168 68 　ULD2E6R8MPD 10 10× 12.5 0.24 200 90 　ULD2E100MPD 12 10×12.5 0.24 220 97 　ULD2E120MPD 18 10× 16 0.24 280 129 　ULD2E180MPD 1 6.3× 11 0.24 80 24 ※ULD2G010MED 1.5 6.3× 11 0.24 100 29 ※ULD2G1R5MED 2.2 8× 11.5 0.24 128 40 　ULD2G2R2MPD 2.7 8× 11.5 0.24 143.2 43 　ULD2G2R7MPD 3.3 8× 11.5 0.24 152.8 47 　ULD2G3R3MPD 3.9 10× 12.5 0.24 162.4 57 　ULD2G3R9MPD 4.7 10× 12.5 0.24 175.2 61 　ULD2G4R7MPD 5.6 10× 12.5 0.24 189.6 64 　ULD2G5R6MPD 6.8 10× 16 0.24 208.8 85 　ULD2G6R8MPD 8.2 10× 16 0.24 231.2 88 　ULD2G8R2MPD 5.6 10× 16 0.24 200.8 58 　ULD2W5R6MPD 6.8 10× 16 0.24 222.4 62 　ULD2W6R8MPD 8.2 10× 20 0.24 247.6 88 　ULD2W8R2MPD 10 10×20 0.24 280 92 　ULD2W100MPD 15 12.5× 20 0.24 370 140 　ULD2W150MHD 22 12.5× 25 0.24 496 240 　ULD2W220MHD 22 16× 20 0.24 496 292 　ULD2W220MHD6 27 16× 20 0.24 586 305 　ULD2W270MHD 33 16× 25 0.24 694 392 　ULD2W330MHD 33 18× 20 0.24 694 312 　ULD2W330MHD6 47 18× 25 0.24 946 480 　ULD2W470MHD 68 18× 30.5 0.24 1324 520 　ULD2W680MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L