UMA0G100MDD

ALUMINUM ELECTROLYTIC CAPACITORS MA 5mmL, Standard, For General Purposes series MT ML MV MF Low Leakage Current High Temperature Standard series with 5mm height. Adapted to the RoHS directive (2002/95/EC). Long Life MA Smaller Low Impedance Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Rated Capacitance Tolerance Leakage Current tan δ MJ Performance Characteristics – 40 ~ +85°C 4 ~ 50V 0.1 ~ 470µF ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ (MAX.) 4 0.35 Figures in ( 6.3 10 16 25 35 50 0.24 (0.30) 0.20 (0.24) 0.16 (0.20) 0.14 (0.18) 0.12 (0.16) 0.10 (0.13) MR series. Measurement frequency : 120Hz ) are for Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C 4 7 15 6.3 4 8 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 Endurance After 2000 hours' application of rated voltage at 85°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value (MR series & φ 3 product : Within ±25%) 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 25V 10µF) f Sleeve (P.E.T.) D+0.5MAX d UMA 1 E 1 0 0 M D D P ±0.5 1 2 3 4 5 6 7 8 9 10 11 12 2 Size code ( f 3: P±0.3 ) (mm) L+1MAX 15MIN 4MIN f D 3 4 5 6.3 8 P 1.0 1.5 2.0 2.5 2.5 fd 0.4 0.45 0.45 0.45 0.45 • Please refer to page 21 about the end seal configulation. 1 Configuration Pb-free leadwire fD Pb-free PET sleeve 3 CD 4~8 DD 16 1C 25 1E D Code 3 2 4~8 Ñ Configuration 1 Capacitance tolerance (± 20%) Rated capacitance (10mF) Rated voltage (25V) Series name Type f f 2 In case at f 3 units, put 2 as size code. 35 1V 50 1H 4 × 5 (3 × 5) 1.0(1.0) 4 × 5 (3 × 5) 2.0(2.0) 4 × 5 (3 × 5) 2.8(2.8) 4 × 5 (3 × 5) 4.0(4.0) 4 × 5 (3 × 5) 8.4(8.0) 8.4 0.4 × 5 13(10) 0.4 × 5 15(10) 17 18 0.5 × 5 20 29 6.3 × 5 33 46 0.8 × 5 52(48) 0.8 × 5 62(52) 71 80 Dimensions Cap.(µF) V Code 4 0G 6.3 0J 10 1A 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 0.3 × 5 0.4 × 5 0.4 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 19 28 33 56 96 145 185 0.3 × 5 0.4 × 5 0.5 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 15 28(21) 37 45 70(68) 110(90) 170 0.5 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 33 41 52(43) 80(76) 135 0.3 × 5 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 0.8 × 5 10 23(18) 37 49(43) 58 92(86) 0.3 × 5 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 0.8 × 5 0.8 × 5 10 16(12) 27 42 52 70(62) 110 0.3 × 5 0.4 × 5 0.4 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 Case size φ D × L (mm) ( Rated ripple Size φ3 × 5 is available for capacitors marked. " "/ Size φ5 × 5 is available for capacitors marked. " " Size φ6.3 × 5 is available for capacitors marked. " " In such a case, M R will be put at 2nd and 3rd digit of type numbering system. Rated Ripple (mArms) at 85°C 120Hz ) = φ3 units and MR series. Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz ~ 1.50 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V