UMF1C100MDD

ALUMINUM ELECTROLYTIC CAPACITORS MF 5mmL, Low Impedance series Low impedance over wide temperature range of – 55 ~ +105°C, with 5mm height. Suited for DC-DC converters where smaller case size and lower impedance are required. Adapted to the RoHS directive (2002/95/EC). MF Low Impedance MT Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Rated Capacitance Tolerance Leakage Current tan δ Performance Characteristics – 55 ~ +105°C 6.3 ~ 35V 1 ~ 100µF ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ (MAX.) 6.3 0.22 10 0.20 6.3 2 4 10 2 4 16 0.18 16 2 3 25 0.14 25 2 3 35 0.12 35 2 3 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 55°C / Z+20°C Endurance After 1000 hours' application of rated voltage at 105°C capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storig the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Sleeve (P.E.T.) φd Type numbering system (Example : 25V 10µF) 1 2 3 4 5 6 7 8 9 10 11 UMF 1 E 1 0 0 M DD Configuration φ D+0.5 MAX P ± 0.5 Capacitance tolerance (± 20%) Rated capacitance (10µF) (mm) Rated voltage (25V) Series name Type Configuration φD 4 ~ 6.3 Pb-free leadwire Pb-free PET sleeve L+1MAX 15 MIN 4 MIN φD P φd 4 1.5 0.45 5 2.0 0.45 6.3 2.5 0.45 DD Dimensions Cap.(µF) V Code 6.3 0J 10 1A 16 1C 25 1E 4×5 4×5 4×5 4×5 4×5 5×5 5×5 6.3 × 5 6.3 × 5 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 010 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 4×5 5×5 5×5 6.3 × 5 6.3 × 5 5.0 2.6 2.6 1.3 1.3 50 80 80 115 115 5×5 5×5 6.3 × 5 2.6 2.6 1.3 80 80 115 4×5 5×5 5×5 6.3 × 5 6.3 × 5 5.0 2.6 2.6 1.3 1.3 50 80 80 115 115 4×5 4×5 5×5 6.3 × 5 6.3 × 5 6.3 × 5 5.0 5.0 2.6 1.3 1.3 1.3 50 50 80 115 115 115 35 1V 5.0 5.0 5.0 5.0 5.0 2.6 2.6 1.3 1.3 50 50 50 50 50 80 80 115 115 Case size Impedance Rated ripple φ D × L (mm) Max. Impedance (Ω) at 20°C 100kHz Rated Ripple (mArms) at 105°C 100kHz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.35 120 Hz 0.50 300 Hz 0.64 1 kHz 0.83 10 kHz ~ 1.00 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V