UMF1C150MDD1TP

ALUMINUM ELECTROLYTIC CAPACITORS UMF 5mmL, Low Impedance Low impedance over wide temperature range of – 55 to +105°C, with 5mm height. Suited for DC-DC converters where smaller case size and lower impedance are required. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UMF Low Impedance UMT Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 1 to 100µF Rated Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C 6.3 0.22 Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 10 0.20 16 0.18 25 0.14 35 0.12 Measurement frequency : 120Hz Stability at Low Temperature (MAX.) Z– 55°C / Z+20°C The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Endurance Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storig the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Shelf Life Marking Radial Lead Type Type numbering system (Example : 25V 10µF) 1 φd 2 3 1 4 5 2 3 6 7 4 5 8 6 9 10 11 7 8 9 10 11 UMF 1 E 1 0 0 M DD UMF 1 E 1 0 0 M DD φ D+0.5 MAX P±0.5 φd P±0.5 Sleeve (P.E.T.) Sleeve (P.E.T.) φ D+0.5 MAX 35 2 3 25 2 3 16 2 3 10 2 4 6.3 2 4 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio (mm) 15 MIN L+1MAX L+1MAX 4 MIN 15 MIN 4 MIN φD P φd 4 5 6.3 φ D 2.0 4 5 1.5 2.5 P 0.45 1.5 0.45 2.0 0.45 φ d 0.45 0.45 (mm) 6.3 2.5 0.45 Configuration Configuration Pb-free leadwire φD Pb-free Pb-free PET sleeve leadwire φD Pb-free 4 to 6.3 DD PET sleeve 4 to 6.3 DD Configuration Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (10µF) Rated capacitance (10µF) Rated voltage (25V) Rated voltage (25V) Series name Series name Type Type Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.35 120 Hz 0.50 300 Hz 0.64 1 kHz 0.83 10 kHz or more 1.00 Dimension table in next page. CAT.8100J ALUMINUM ELECTROLYTIC CAPACITORS UMF ■ Dimensions Rated Voltage （V） （code） 6.3 （0J） 10 （1A） 16 （1C） 25 （1E） 35 （1V） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Leakage Current Impedance（Ω） Rated Ripple （µA） （mArms） MAX. at 20℃ after （20℃/100kHz） （105℃/100kHz） 2 minutes （ ） Part Number 22 4×5 0.22 3 5.0 50 UMF0J220MDD 33 5×5 0.22 3 2.6 80 UMF0J330MDD 47 5×5 0.22 3 2.6 80 UMF0J470MDD 68 6.3×5 0.22 4.284 1.3 115 UMF0J680MDD 100 6.3× 5 0.22 6.3 1.3 115 UMF0J101MDD 22 5×5 0.20 3 2.6 80 UMF1A220MDD 33 5×5 0.20 3.3 2.6 80 UMF1A330MDD 47 6.3×5 0.20 4.7 1.3 115 UMF1A470MDD 10 4×5 0.18 3 5.0 50 UMF1C100MDD 15 5× 5 0.18 3 2.6 80 UMF1C150MDD 22 5× 5 0.18 3.52 2.6 80 UMF1C220MDD 33 6.3× 5 0.18 5.28 1.3 115 UMF1C330MDD 47 6.3× 5 0.18 7.52 1.3 115 UMF1C470MDD 4.7 4× 5 0.14 3 5.0 50 UMF1E4R7MDD 6.8 4× 5 0.14 3 5.0 50 UMF1E6R8MDD 10 5× 5 0.14 3 2.6 80 UMF1E100MDD 15 6.3× 5 0.14 3.75 1.3 115 UMF1E150MDD 22 6.3× 5 0.14 5.5 1.3 115 UMF1E220MDD 33 6.3× 5 0.14 8.25 1.3 115 UMF1E330MDD 1 4× 5 0.12 3 5.0 50 UMF1V010MDD 1.5 4× 5 0.12 3 5.0 50 UMF1V1R5MDD 2.2 4× 5 0.12 3 5.0 50 UMF1V2R2MDD 3.3 4× 5 0.12 3 5.0 50 UMF1V3R3MDD 4.7 4× 5 0.12 3 5.0 50 UMF1V4R7MDD 6.8 5× 5 0.12 3 2.6 80 UMF1V6R8MDD 10 5× 5 0.12 3.5 2.6 80 UMF1V100MDD 15 6.3× 5 0.12 5.25 1.3 115 UMF1V150MDD 22 6.3× 5 0.12 7.7 1.3 115 UMF1V220MDD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. Please refer to page 18, 19 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100J