UMJ1H100MDL

ALUMINUM ELECTROLYTIC CAPACITORS MJ 5.2mmL MAX. series 5.2mmL MAX. height. Adapted to the RoHS directive (2002/95/EC). MA SA • SR Smaller MJ Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Performance Characteristics – 40 ~ +85°C 4 ~ 50V 0.1 ~ 220µF ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 4 0.35 6.3 0.26 4 7 15 10 0.20 6.3 4 8 16 0.16 10 3 8 25 0.14 16 2 4 25 2 4 35 0.12 35 2 3 50 0.12 50 2 3 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Endurance After 1000 hours' application of rated voltage at 85°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Black print on the case top. Radial Lead Type Lot No. Trade mark Capacitance Voltage Laminated case B Type numbering system (Example : 25V 10µF) d UM J 1 E 1 0 0 MD L P ±0.5 1 2 3 4 5 6 7 8 9 10 11 Configuration D Code 4 ~ 6.3 DL B D+0.5MAX X2 10 16V 5.2MAX. Voltage mark for 6.3V is [6V]. 15MIN 4MIN B D 4 5 6.3 P 1.5 2.0 2.5 Bd 0.45 0.45 0.45 (mm) Capacitance tolerance (± 20%) Rated Capacitance (10µF) Rated voltage (25V) Series name Type 16 1C 25 1E 35 1V Dimensions Cap.(µF) V Code B 4 0G 6.3 0J 10 1A 50 1H 4 4 4 4 4 4 4 5 6.3 1.0 2.0 2.8 4.0 8.4 13 17 20 33 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 4 4 5 6.3 28 33 56 96 4 5 5 6.3 28 37 45 70 5 5 6.3 33 41 52 4 5 6.3 6.3 23 37 49 58 4 5 6.3 6.3 16 27 42 52 4 5 6.3 18 29 46 Case size φ D (mm) Rated ripple Rated Ripple (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz ~ 1.50 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V