UMP0J330MDD1TP

ALUMINUM ELECTROLYTIC CAPACITORS UMP 5mmL, Bi-Polarized Bi-polarized series with 5mm height. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UMP Bi-polarized UMA Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.1 to 47µF Rated Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.05CV or 10 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C 6.3 0.24 Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 10 0.20 16 0.17 25 0.17 35 0.15 50 0.15 Measurement frequency : 120Hz 6.3 4 8 Rated voltage (V) Stability at Low Temperature Impedance ratio (MAX.) Z– 25°C / Z+20°C Z– 40°C / Z+20°C Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C with the polarity inverted every 250 hours. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Sleeve (Sleeve P.E.T.) (P.E.T.) Capacitance change tan δ Leakage current Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 10V 33µF) φd 1 φd 2 3 1 24 35 46 57 8 6 79 10 8 11 10 9 11 UMU PM 1P A 13 A 3 0 DD D 3 M 3 0D M Configuration Configuration Capacitance tolerance (±20%) (±20%) Capacitance tolerance P±0.5 P±0.5 φ D+0.5 MAX φ D+0.5 MAX 50 2 3 35 2 3 25 2 4 16 2 4 10 3 6 Rated capacitance (33µF) (33µF) Rated capacitance (mm) L+1MAX L+1MAX 15 MIN 15 MIN4 MIN 4 MIN φD 4φ D 54 6.35 P 1.5P 2.0 1.5 2.5 2.0 φ d 0.45 φ d 0.45 0.45 0.45 0.45 (mm) Rated voltage Rated (10V) voltage (10V) 6.3 Series name Series name 2.5 0.45 Type Configuration Configuration Pb-free leadwire Pb-free leadwire sleeve φ DPb-free PET Pb-free PET sleeve 4 to 6.3 4 to 6.3 DD DD φD Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Dimension table in next page. CAT.8100J Type ALUMINUM ELECTROLYTIC CAPACITORS UMP ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 22 6.3 （0J） 10 （1A） ） Part Number 28 UMP0J220MDD 10 6.3× 5 0.24 10.395 37 UMP0J330MDD 0.24 14.805 45 UMP0J470MDD 10 4× 5 0.20 10 17 UMP1A100MDD 22 6.3×5 0.20 11 33 UMP1A220MDD 33 6.3×5 0.20 16.5 41 UMP1A330MDD 4×5 0.17 10 12 UMP1C4R7MDD 10 5× 5 0.17 10 23 UMP1C100MDD 22 6.3×5 0.17 17.6 37 UMP1C220MDD 33 6.3× 5 0.17 26.4 49 UMP1C330MDD 5×5 0.17 10 12 UMP1E3R3MDD 4.7 2.2 5×5 0.17 10 16 UMP1E4R7MDD 6.3× 5 0.17 12.5 27 UMP1E100MDD 4×5 0.15 10 8.4 UMP1V2R2MDD 3.3 5×5 0.15 10 16 UMP1V3R3MDD 4.7 5×5 0.15 10 18 UMP1V4R7MDD 29 UMP1V100MDD 10 50 （1H） （ Rated Ripple （mArms） （85℃/120Hz） 6.3× 5 10 35 （1V） 0.24 Leakage Current （µA） at 20℃ after 2 minutes 33 3.3 25 （1E） 5×5 tan δ 47 4.7 16 （1C） Case Size φD×L（mm） 6.3×5 0.15 17.5 0.1 4×5 0.15 10 1.0 UMP1H0R1MDD 0.22 4× 5 0.15 10 2.0 UMP1HR22MDD 0.33 4× 5 0.15 10 2.8 UMP1HR33MDD 0.47 4× 5 0.15 10 4.0 UMP1HR47MDD 1 4× 5 0.15 10 8.4 UMP1H010MDD 2.2 5× 5 0.15 10 13 UMP1H2R2MDD 3.3 5× 5 0.15 10 17 UMP1H3R3MDD 4.7 6.3× 5 0.15 11.75 20 UMP1H4R7MDD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. Please refer to page 18, 19 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100J