UMT1C100MDD

ALUMINUM  ELECTROLYTIC  CAPACITORS UMT 5mmL, Wide Temperature Range Wide temperature range of – 55 to +105°C, with 5mm height. Compliant to the RoHS directive (2011/65/EU). UMV UMT Long life High Temperature UMA Specifications Item Performance Characteristics Category Temperature Range – 55 to +105°C Voltage Range 4 to 50V Rated Capacitance Range 1 to 100µF Rated Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C 4 0.37 Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 50 Figures in ( ) are for 0.13 (0.14) 0.12 (0.14) φ 3 product. Measurement frequency : 120Hz The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Endurance 50 2 3 35 2 3 25 2 3 16 2 4 10 3 5 6.3 3 8 4 6 12 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio  ZT / Z20 (MAX.) Z– 40°C / Z+20°C Stability at Low Temperature < 16V) Within ±25% of the initial capacitance value (φ 3mm unit,and = > 25V) Within ±20% of the initial capacitance value ( = Capacitance change 200% or less than the initial specified value tan δ Leakage current Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 UMT 1 E 1 0 0 MDD Sleeve (P.E.T.) φd 1 P±0.5 P±0.5 φ D+0.5 MAX. φ D+0.5 MAX. Type numbering system (Example : 25V 10µF) φd (φ 3 : P±0.3) 2 3 4 5 6 7 8 9 10 11 12 UMT 1 E 1 0 0 MDD φD 2 2 4 to 6.3 Code — Size code φ D 3 2 Configuration 1 2 4 to 6.3 — Size code Capacitance tolerance (±20%) Configuration 1 Rated capacitance (10µF) Capacitance tolerance (±20%) Rated voltage (25V) Rated capacitance (10µF) Series name Rated voltage (25V) Type Series name (φ 3 : P±0.3) (mm) φD L+1MAX. 15 MIN L+1MAX. 15 MIN 3 4 5 6.3 P 1.0 1.5 2.0(mm)2.5 φ D φ d 3 0.404 0.455 0.45 6.3 0.45 P 1.0 1.5 2.0 2.5 φ d 0.40 0.45 0.45 0.45 4 MIN 4 MIN 1 Configuration φD 1 Configuration 3 • Please refer to page 20 about the end seal configuration. Code 3 Pb-free leadwire Pb-free PET sleeve Type CD leadwire φ D4 to 6.3 Pb-free DD Pb-free PET sleeve 2 For φ 3mm unit, place 3 CD size code of 2 to 12th digit. 4 to 6.3 Dimensions Cap.(µF) 1 2.2 3.3 4.7 10 22 33 47 100 V Code 010 2R2 3R3 4R7 100 220 330 470 101 DD 2 For φ 3mm unit, place size code of 2 to 12th digit. 4 0G 6.3 0J 10 1A 16 1C 25 1E 35 1V 4×5 5×5 5×5 6.3 × 5 22 30 36 60 4×5 5×5 5×5 6.3 × 5 22 30 36 60 5×5 5×5 6.3 × 5 27 35 46 4 × 5 4 × 5 18 (14) 5 × 5 5 × 5 30 6.3 × 5 6.3 × 5 40 6.3 × 5 6.3 × 5 50 Size φ3 × 5 is available for capacitors marked " " Figures in ( ) are for φ 3 product. 3 ×5 4 × 5 13 (10) 4 × 5 23 5×5 38 6.3 × 5 48 7.5 11 (9) 15 25 48 50 1H 4 × 5 6.2(5.9) 4 × 5 11 (9) 4 × 5 14 5 × 5 19 6.3 × 5 30 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 170 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.