UMV1A470MFD

ALUMINUM  ELECTROLYTIC  CAPACITORS UMV 5mmL, Long Life Assurance Extended load life of 5000 hours at +105°C, with 5mm height. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). USV Smaller UMV Long Life UMT UMF Specifications Item Performance Characteristics Category Temperature Range –40 to +105°C Rated Voltage Range 4 to 50V Rated Capacitance Range 1 to 100µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) 4 0.37 Rated voltage (V) tan δ (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.13 50 0.12 Measurement frequency : 120Hz 4 8 14 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio Stability at Low Temperature  (MAX.) Z– 40°C / Z+20°C 6.3 4 10 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C. Endurance 10 3 7 16 2 5 25 2 3 Capacitance change tan δ Leakage current 35 2 3 50 2 3 Within ± 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with silver color letter on dark brown sleeve. Shelf Life Marking Radial Lead Type Type numbering system (Example : 25V 10µF) Sleeve (P.E.T.) Sleeve (P.E.T.) 1 1 φd φd 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 11 10 11 Configuration Configuration P±0.5 P±0.5 +0.5 MAX. +0.5 MAX. φ φDD UM MV V 11 E E 11 00 00 M M F FD D U L+1MAX. L+1MAX. 15 MIN 15 MIN 4 MIN 4 MIN Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (10µF) Rated capacitance (10µF) Rated voltage (25V) Rated voltage (25V) (mm) (mm) 4 5 6.3 4 5 6.3 1.5 2.0 2.5 1.5 2.0 2.5 0.45 0.45 0.45 0.45 0.45 0.45 φD φD P P φd φd Series name Series name Type Type Configuration Configuration Pb-free leadwire φD Pb-free Pb-free leadwire PET sleeve φD Pb-free PET sleeve FD 4 to 6.3 4 to 6.3 FD Dimensions Cap.(µF) 1 2.2 3.3 4.7 10 22 33 47 100 4 0G V Code 010 2R2 3R3 4R7 100 220 330 470 101 4×5 5×5 5×5 6.3 × 5 6.3 0J 22 30 36 60 4×5 5×5 5×5 6.3 × 5 10 1A 22 30 36 60 5×5 5×5 6.3 × 5 16 1C 27 35 46 4×5 5×5 6.3 × 5 6.3 × 5 25 1E 18 30 40 50 4×5 5×5 6.3 × 5 6.3 × 5 35 1V 13 23 38 48 4×5 5×5 6.3 × 5 50 1H 15 25 42 4×5 4×5 4×5 5×5 6.3 × 5 Case size φ D × L (mm) 06.2 11.0 14.0 19.0 30.0 Rated ripple Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 186 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.