UMV1E220MFD

ALUMINUM ELECTROLYTIC CAPACITORS UMV 5mmL, Long Life Assurance Extended load life of 5000 hours at +105°C, with 5mm height. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). USV Smaller UMV UMT UMF Long Life Specifications Item Performance Characteristics Category Temperature Range –40 to +105°C Rated Voltage Range 4 to 50V Rated Capacitance Range 1 to 100µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) 4 0.37 Rated voltage (V) tan δ (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.13 50 0.12 Measurement frequency : 120Hz 4 8 14 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio Stability at Low Temperature (MAX.) Z– 40°C / Z+20°C The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C. Endurance 6.3 4 10 10 3 7 16 2 5 25 2 3 Capacitance change tan δ Leakage current 35 2 3 50 2 3 Within ± 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with silver color letter on dark brown sleeve. Shelf Life Marking Radial Lead Type Type numbering system (Example : 25V 10µF) Sleeve (P.E.T.) Sleeve (P.E.T.) 1 1 φd φd 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 11 10 11 Configuration Configuration P±0.5 P±0.5 +0.5 MAX. +0.5 MAX. φ φDD UM MV V 11 E E 11 00 00 M M F FD D U L+1MAX. L+1MAX. 15 MIN 15 MIN 4 MIN 4 MIN φD φD P P φd φd Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (10µF) Rated capacitance (10µF) Rated voltage (25V) Rated voltage (25V) (mm) (mm) 4 5 6.3 4 5 6.3 1.5 2.0 2.5 1.5 2.0 2.5 0.45 0.45 0.45 0.45 0.45 0.45 Configuration Configuration Pb-free leadwire φD Pb-free Pb-free leadwire PET sleeve φD Pb-free PET sleeve FD 4 to 6.3 4 to 6.3 FD Series name Series name Type Type Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Dimension table in next page. CAT.8100J ALUMINUM ELECTROLYTIC CAPACITORS UMV ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 22 4 （0G） 6.3 （0J） 10 （1A） 16 （1C） 50 （1H） 0.37 Leakage Current （µA） at 20℃ after 2 minutes （ ） Rated Ripple （mArms） （105℃/120Hz） Part Number 22 UMV0G220MFD 3 33 5×5 0.37 3 30 UMV0G330MFD 5× 5 0.37 3 36 UMV0G470MFD 100 6.3× 5 0.37 4 60 UMV0G101MFD 22 4× 5 0.28 3 22 UMV0J220MFD 33 5× 5 0.28 3 30 UMV0J330MFD 47 5× 5 0.28 3 36 UMV0J470MFD 100 6.3× 5 0.28 6.3 60 UMV0J101MFD 22 5× 5 0.24 3 27 UMV1A220MFD 33 5× 5 0.24 3.3 35 UMV1A330MFD 47 6.3× 5 0.24 4.7 46 UMV1A470MFD 10 4×5 0.20 3 18 UMV1C100MFD 22 5× 5 0.20 3.52 30 UMV1C220MFD 33 6.3× 5 0.20 5.28 40 UMV1C330MFD 47 6.3× 5 0.20 7.52 50 UMV1C470MFD 4× 5 0.16 3 13 UMV1E4R7MFD 10 5× 5 0.16 3 23 UMV1E100MFD 22 6.3× 5 0.16 5.5 38 UMV1E220MFD 33 6.3×5 0.16 8.25 48 UMV1E330MFD 4.7 35 （1V） 4× 5 tan δ 47 4.7 25 （1E） Case Size φD×L（mm） 4× 5 0.13 3 15 UMV1V4R7MFD 10 5× 5 0.13 3.5 25 UMV1V100MFD 22 6.3× 5 0.13 7.7 42 UMV1V220MFD 1 4× 5 0.12 3 2.2 4× 5 0.12 3 6.2 11 UMV1H010MFD UMV1H2R2MFD 3.3 4× 5 0.12 3 14 UMV1H3R3MFD 4.7 5× 5 0.12 3 19 UMV1H4R7MFD 6.3×5 0.12 5 30 UMV1H100MFD 10 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. Please refer to page 18, 19 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100J