UMW1C330MDD

ALUMINUM ELECTROLYTIC CAPACITORS UMW 5mmL, For General Audio Equipment Acoustic series, with 5mm height. Compliant to the RoHS directive (2011/65/EU). USW Smaller UMW Specifications Performance Characteristics Item Category Temperature Range –40 to +85°C Rated Voltage Range 4 to 50V Rated Capacitance Range 1 to 470µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 4 0.35 6.3 0.24 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 Measurement frequency : 120Hz Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z– 25°C / Z+20°C Z– 40°C / Z+20°C The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C. Endurance Capacitance change tan δ Leakage current Marking Radial Lead Type Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value 1 2 3 4 5 6 7 8 9 10 11 2 3 4 5 6 7 8 9 10 11 U 1M W 1 E 1 0 0 MDD U MW 1 E 1 0 0 M D D φd P ±0.5 P ±0.5 φD+0.5 MAX. φD+0.5 MAX. Sleeve (P.E.T.) L+1MAX. L+1MAX. 15MIN Configuration φD 4 5 6.3 8 (mm) P φD 1.5 4 2.0 5 2.56.3 2.5 8 φd P 0.451.50.452.00.452.5 0.452.5 4MIN 0.45 0.45 0.45 0.45 Configuration Pb-free leadwire Configuration φD 4 to φ8 D 4 to 8 Dimensions 4 0G V code 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 4× 5 4× 5 5× 5 6.3 × 5 8× 5 8× 5 6.3 0J 28 33 56 96 145 185 10 1A 28 37 45 70 110 170 4× 5 5× 5 5× 5 6.3 × 5 8× 5 8× 5 5× 5 5× 5 6.3 × 5 8× 5 8× 5 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 Pb-free PET sleeve Pb-free leadwire Pb-freeDD PET sleeve DD 16 1C 33 41 52 80 135 4× 5 5× 5 6.3 × 5 6.3 × 5 8× 5 25 1E 23 37 49 58 92 4× 5 5× 5 6.3 × 5 6.3 × 5 8× 5 8× 5 35 1V 16 27 42 52 70 110 4× 5 4× 5 5× 5 6.3 × 5 8× 5 8× 5 15 18 29 46 62 80 50 1H 4× 5 4× 5 4× 5 5× 5 6.3 × 5 8× 5 8× 5 8.4 13 17 20 33 52 71 Case size φ D × L Rated (mm) ripple Rated ripple current(mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (10µF) Rated capacitance (10µF) Rated voltage (25V) Rated voltage (25V) Series name Series name Type Type (mm) 4MIN 15MIN φd 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 50 2 3 Type numbering system (Example : 25V 10µF) φd Sleeve (P.E.T.) 35 2 3 After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with black color letter on gold sleeve. Shelf Life Cap.(µF) 25 2 4 16 2 4 10 3 6 6.3 4 8 4 7 15 Rated voltage (V) 10 kHz or more 1.50 278 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.